1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

One More Newbie Question (Print Quality)

Discussion in 'General Questions' started by Jay312, Mar 20, 2017.

  1. Jay312

    Jay312 Member

    Joined:
    Mar 18, 2017
    Messages:
    64
    Likes Received:
    10
    This question is about Print Quality:

    1. besides changing the settings to fine, would slowing down how fast the printer printed help with better quality?

    2. Would also a smaller extruder nozzle also help? like instead of the stock 0.4mm using a 0.2mm??
     
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,629
    Likes Received:
    7,312
    Absolutely. You need to go slower with a smaller nozzle also in proportion to how much you reduced the nozzle size. Slower is more accurate any away.

    See above :)
     
  3. Jay312

    Jay312 Member

    Joined:
    Mar 18, 2017
    Messages:
    64
    Likes Received:
    10
    Thank you Mark you have been a big help. I am really enjoying my Robo 3D printer.
     
    Rigmarol and mark tomlinson like this.

Share This Page