1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Power supply fan not running

Discussion in 'General Questions' started by xfire_dragonx, Aug 30, 2018.

  1. xfire_dragonx

    xfire_dragonx Member

    Joined:
    Jun 2, 2018
    Messages:
    83
    Likes Received:
    13
    Get everything back together on my printer, only to find the power supply fan not working. The power unit in my printer is the stock version. I did some reading and found out that it might be better to replace the power supply or should i get a new fan.

    As the printer sits everything is running except for the power supply fan.
     
    #1 xfire_dragonx, Aug 30, 2018
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    #2 mark tomlinson, Aug 30, 2018
  3. xfire_dragonx

    xfire_dragonx Member

    Joined:
    Jun 2, 2018
    Messages:
    83
    Likes Received:
    13
    #3 xfire_dragonx, Aug 30, 2018
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    Yes, that is fine. Last time I swapped one I actually used one that was 33 amp (a few more watts never hurt -- at least 350w / 12v is the minimum) for a few dollars more.
    That one you linked to is the exact sames size/specs as stock and should work just fine.
     
    #4 mark tomlinson, Aug 30, 2018

Share This Page