1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Power supply fan not running

Discussion in 'Troubleshooting' started by xfire_dragonx, Sep 5, 2018.

  1. xfire_dragonx

    xfire_dragonx Member

    Joined:
    Jun 2, 2018
    Messages:
    83
    Likes Received:
    13
    #1 xfire_dragonx, Sep 5, 2018
    Last edited: Sep 5, 2018
    mark tomlinson likes this.
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    No, on all of mine the fan is on with the A/C power :)
    Ping the seller and see if theirs is thermostatic

    edit: however it says that on the case :)
     
    #2 mark tomlinson, Sep 5, 2018
  3. xfire_dragonx

    xfire_dragonx Member

    Joined:
    Jun 2, 2018
    Messages:
    83
    Likes Received:
    13
    Did a test print and the nozzle is digging into the print. I have learned that I have a r1 and it should have this in Configuration.h #define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,2267.72,723.38}. I don't see the line anywhere.
     
    #3 xfire_dragonx, Sep 6, 2018
  4. xfire_dragonx

    xfire_dragonx Member

    Joined:
    Jun 2, 2018
    Messages:
    83
    Likes Received:
    13
    Found the line..
     
    #4 xfire_dragonx, Sep 6, 2018
    mark tomlinson likes this.

Share This Page