Printer Extruder Trying to go off of print bed

The printer was starting out fine and all of a sudden after trying to put a couple of parts in at one time it started trying to go off the print bed to the right. I looked at the G-Code Editor and think this is the problem. I spent a lot of time going through the settings, restarted the program, printer, and computer, and tried to play with some settings but I don't know how to fix this and bring everything back within the bed range. Thanks in advance for the help.

 

My slicing behaved weird when my models had issues. Running them through NetFabbs repair generally solved the slicing issue.

 

I'll try that out, thanks Mike

 

Mike, Net Fabbs helped with a scale issue I had so it was great to get that fixed unfortunately my slice still looks like above. I also switched back and sliced a couple of different models that I've sliced normally and used the printer for before but they are now doing the same thing as above. It's like a setting got changed or the program was corrupted some how. I'm not really sure what happened.

 

Have you tried jerry's idea of using the latest release of slicer?

You might also try rebuilding a new slicer profile