Quality

I just printed this test
https://www.dropbox.com/sc/j868jtoi6wxllo4/AAAb9XYt7H2elia1mGCJMGb1a

how could i improve on the quality. the squares are round and the infill on top was not completed.

thanks

 

Slow your speed down to 30 and twang your belts to make sure they're good and tight

 

thanks ill try slower. my belts seem to be pretty good.

 

Just move things around. If anything wiggled loose during shipping it might affect quality. If it's not good and tight see if you can can make it so.

 

doublecheck your smooth rod mounts. These are the black things that hold the smooth rods up. Check to see if they're cracked.