1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Robo 3D R1 Plus with Full Graphics LCD Controller

Discussion in 'Troubleshooting' started by Woodrow Collins, Oct 19, 2015.

  1. Woodrow Collins

    Woodrow Collins New Member

    Joined:
    Oct 10, 2015
    Messages:
    26
    Likes Received:
    3
    So today I received a full graphics controller and have installed it successfully. I am currently printing a casing for it (still using the PC). I have a couple questions for those that may already have the controller. Is there anything that needs done configuration wise to the controllers settings to match any settings that your pc application (such as matter control) has, or is this information written in the gcode and should be as simple as an export plug and print?
     
    #1 Woodrow Collins, Oct 19, 2015
  2. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    Plug in and print. The LCD controller is really more of a display device that takes things you have done on your PC, like slicing a model, and allows you to print from SD without the PC. You can display and or adjust settings that are already stored in the printer. It isn't really as Smart as the name implies.
     
    #2 WheresWaldo, Oct 19, 2015

Share This Page