1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unanswered robo3d r1 plus remove quick release plate?

Discussion in 'Troubleshooting' started by Karo, Nov 11, 2016.

  1. Karo

    Karo New Member

    Joined:
    May 21, 2016
    Messages:
    7
    Likes Received:
    0
    hello i have a question i want to remove the quick release plate to repace it with one that i printed because the stock one makes my e3d v6 loose
    one of the screws is really annoying how can i remove it?
     
    #1 Karo, Nov 11, 2016
  2. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,757
    Likes Received:
    2,339
    Hi Karo, there are 2 screws (phillips head) with 2 lock nuts on top. You have to remove the 2 screws all the way and the quick release should come out no problem (the front one is in a slot so you can just loosen it, but the back one MUST come all the way out)
     
    #2 Geof, Nov 11, 2016
  3. danzca6

    danzca6 Well-Known Member

    Joined:
    Jul 27, 2015
    Messages:
    2,161
    Likes Received:
    1,077
    And the back one will need the part cooling fan removed in order to get to it. Hopefully the two M4 bolts aren't over torqued.
     
    #3 danzca6, Nov 11, 2016

Share This Page