1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Screw on M3 Stud Thermistor

Discussion in 'Mods and Upgrades' started by David Sparrow, Feb 15, 2015.

  1. David Sparrow

    David Sparrow Member

    Joined:
    Jul 20, 2014
    Messages:
    126
    Likes Received:
    16
    #1 David Sparrow, Feb 15, 2015
    Last edited by a moderator: Feb 15, 2015
  2. Printed Solid

    Printed Solid Volunteer Admin
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    1,605
    Likes Received:
    1,003
    It's probably the same part. Rp-one?
    The epoxy is rated for continuous use at 260. Realistically, it can probably take a higher temperature since it's not really sustaining any load.
    I'll add the 260C notice on my page as well.

    For future orders, I'll see if I can get them done with a higher temperature rated material or perhaps get an all metal version for a tiny bit more.
     
    #2 Printed Solid, Feb 15, 2015
    2 people like this.
  3. David Sparrow

    David Sparrow Member

    Joined:
    Jul 20, 2014
    Messages:
    126
    Likes Received:
    16
    In addition to the glue the plastic insulator has a 260c limit as well so it would need the fiberglass insulator instead.
     
    #3 David Sparrow, Feb 15, 2015

Share This Page