1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Some software tips and tricks

Discussion in 'Software' started by Kilrah, Jul 9, 2017.

  1. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,478
    Likes Received:
    7,303
    It is not one machine either, I built a Pi with the same LCD, printed a case cloned the SD card ("RoboOS") for each of my printers (except the delta which already had OctoPrint). That specific bit is incorrect on all of them. You might think since the other (non-C2) machines are on older images that was a contributor, but no... the C2 is current and still displays this problem :)

    There is just a glitch in how they are displaying the IP address. It is completely hosed which makes me think they made assumptions about which subnets you would be on... or something silly.
     
  2. OutsourcedGuru

    OutsourcedGuru Active Member

    Joined:
    Jun 3, 2017
    Messages:
    752
    Likes Received:
    141
    Alright, I'll work up a fix then. I wanted to climb into the LCD code anyway since I want to add a second extruder and would want to know the dual temperatures.
     
    mark tomlinson likes this.

Share This Page