1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Temperature code restart? Mid-way through print.

Discussion in 'Troubleshooting' started by bcamaro1, Oct 4, 2014.

Thread Status:
Not open for further replies.
  1. bcamaro1

    bcamaro1 Member

    Joined:
    Aug 30, 2014
    Messages:
    72
    Likes Received:
    3
    I for some reason have just started having this issue, which is a code that starts popping up after 10 minutes of the print and it reads,
    < 11:05:33 PM: Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)
    .
    Does anyone know this issue to why this is happening? Besides that everything it working great.

    -Bcamaro1
     
    #1 bcamaro1, Oct 4, 2014
  2. Printed Solid

    Printed Solid Volunteer Admin
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    1,605
    Likes Received:
    1,003
    that sounds like you're probably tripping one of the safety issues for temperature runaway. So, you might have an intermittent problem with one of your thermistors (bed or nozzle). What do the temperature log charts look like?
     
    #2 Printed Solid, Oct 6, 2014
  3. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,277
    Find the first error message. the one you're seeing is just a recuring one. We need to know if it's a high temp, low temp, or temp fall error.
     
    #3 Mike Kelly, Oct 6, 2014
Thread Status:
Not open for further replies.

Share This Page