1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Thermocouple detached

Discussion in 'Troubleshooting' started by rn_1604, Aug 13, 2019.

  1. rn_1604

    rn_1604 New Member

    Joined:
    Mar 27, 2016
    Messages:
    10
    Likes Received:
    3
    Hi, I was printing overnight and part of my PETG print warped as a portion of it was printed on the non heated side of the bed. The hot end probably clashed with the lifted print and it caused major damage to my hot end. I think my thermocouple is detached due to that. Does anyone have a proper image of the hot end so that I can fix it? Thanks a lot.
     

    Attached Files:

    #1 rn_1604, Aug 13, 2019
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    #2 mark tomlinson, Aug 13, 2019
  3. rn_1604

    rn_1604 New Member

    Joined:
    Mar 27, 2016
    Messages:
    10
    Likes Received:
    3

    Attached Files:

    #3 rn_1604, Aug 13, 2019
    mark tomlinson likes this.
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    Excellent job!
     
    #4 mark tomlinson, Aug 13, 2019
  5. rn_1604

    rn_1604 New Member

    Joined:
    Mar 27, 2016
    Messages:
    10
    Likes Received:
    3
    #5 rn_1604, Aug 13, 2019
  6. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    Yes, it is unique and Robo has always been the only source I know of. When Robo turned over all of hte parts sourcing to these people they are now the only source. Email them directly (details are on their page) and see if they will ship to you (give them an address) if you cover costs.

    If not then either someone here buys one and reships it to you (which will get a bit pricier since you have to cover postage twice) or you need to replace the entire hotend.

    I suspect that they will ship outside the US.
     
    #6 mark tomlinson, Aug 13, 2019
  7. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    When I look at their order page they DO ship anywhere in the world.
    I suspect you are just not filling out the shipping address correctly.
    The United States destination at the top is a DROP down list so you can pick your country
     
    #7 mark tomlinson, Aug 13, 2019
  8. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    Here you can see I picked a non-US destination country

    country.jpg
     
    #8 mark tomlinson, Aug 13, 2019
  9. rn_1604

    rn_1604 New Member

    Joined:
    Mar 27, 2016
    Messages:
    10
    Likes Received:
    3
    #9 rn_1604, Aug 13, 2019
    Last edited: Aug 13, 2019
    mark tomlinson likes this.

Share This Page