1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unresolved Tips please!

Discussion in 'Troubleshooting' started by nikhil bhansali, Jun 10, 2015.

  1. nikhil bhansali

    nikhil bhansali New Member

    Joined:
    Mar 1, 2015
    Messages:
    2
    Likes Received:
    0
    #1 nikhil bhansali, Jun 10, 2015
  2. jbigler1986

    jbigler1986 Active Member

    Joined:
    Feb 13, 2015
    Messages:
    534
    Likes Received:
    128
    1.) Maybe to hot. What temps and what material is it? 2.) Over/Under extrusion. Follow this guide on that
    3.) Check all of the belts and pullies to make sure none of them are loose.
     
    #2 jbigler1986, Jun 10, 2015
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    I concur. Too hot and too much filament.
     
    #3 mark tomlinson, Jun 10, 2015

Share This Page