1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Which pins for the bottom case fan?

Discussion in 'Troubleshooting' started by Fruition_Factory, Mar 29, 2016.

  1. Fruition_Factory

    Fruition_Factory Member

    Joined:
    Mar 3, 2016
    Messages:
    39
    Likes Received:
    7
    Can anyone tell me or show a picture of which pins the power is suppose to connect to for the fan that is in the base of the unit cooling the cpu. I had to remove the base cover and found the fan was not plugged in to the board and need to find out where it goes.
     
    #1 Fruition_Factory, Mar 29, 2016
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    Right beside D2 (bottom left corner) there is a 12v AUX connector.

    ramps1-4connectors.png
     
    #2 mark tomlinson, Mar 29, 2016
    Fruition_Factory likes this.
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    Make sure it runs, last R1 I messed with it was polarity sensitive so plugging it in backwards was not helpful :)
     
    #3 mark tomlinson, Mar 29, 2016
    Fruition_Factory likes this.
  4. danzca6

    danzca6 Well-Known Member

    Joined:
    Jul 27, 2015
    Messages:
    2,161
    Likes Received:
    1,077
    yeah, I think the red wire goes on top, in relation to this diagram, and the black on the bottom of those pins. I wish that wire was about 12 inches longer stock.
     
    #4 danzca6, Mar 29, 2016
    Fruition_Factory and mark tomlinson like this.
  5. Fruition_Factory

    Fruition_Factory Member

    Joined:
    Mar 3, 2016
    Messages:
    39
    Likes Received:
    7
    Awesome guys, thanks a bunch. Got it back together and working like a well oiled machine.
     
    #5 Fruition_Factory, Mar 29, 2016

Share This Page