1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unresolved Wont print.

Discussion in 'Troubleshooting' started by brent lamont, Mar 17, 2017.

  1. brent lamont

    brent lamont New Member

    Joined:
    Mar 17, 2017
    Messages:
    2
    Likes Received:
    0
    Just got a r1+ and got it all hooked up connected and ready to go but i cant get it to print, all my axis will move independently. It will sort of do the auto bed level sometime when i click release on the moment tab, the bed and extruder both heat to temp but when i click print..... nothing. I also tried uninstalling all the software and drivers with no luck.
     
    #1 brent lamont, Mar 17, 2017
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    How are you trying to print? What slicer are you using? How did you configure that slicer to use that printer?

    Sadly "Won't print" covers a multitude of sins. We will need a lot more detail :)
     
    #2 mark tomlinson, Mar 18, 2017
  3. brent lamont

    brent lamont New Member

    Joined:
    Mar 17, 2017
    Messages:
    2
    Likes Received:
    0
    yes sry, also im an novice at 3d printing, using matter control trying to print a calibration box using just basic settings. tried using cura but for some reason i cant get it to reconise my printer.
     
    #3 brent lamont, Mar 18, 2017
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    #4 mark tomlinson, Mar 18, 2017

Share This Page