Solved PLA & Blue Painters Tape

I have started using blue painters tape to prevent my bed from chipping I have gone through two glass beds.
I Have printed PETG on the tape but my PLA prints are harder to get off the bed and always has tape fused to it.
Do you have any tips to prevent this or do I just print PLA without it.

 

I've heard of some guys adding a pei plate or build tac that works well with petg, PLA, and so on. Just need to work out where you do ABL without the nozzle hot if you are still using the nozzle as a probe. Or move to mesh leveling. Then you just need to worry about when you home the z.

 

I am trying with a raft I figured the raft will stick to the type and the part will come off the raft.
I might get a PEI sheet.

 

I use a skirt @ 0 distance (so it touches) rather than a raft. I just increase the size (diameter) as needed. Peals right off at 1 or 2 layers.​

 

I do care but I don't want to buy another heated bed because of chipping. I saw a article about using parchment paper between the tape and bed.

 

I understand that my problem is Borosilicate bed keeps chipping from the plastic cooling on it.

 

Or... You could go aluminum for the build plate.