1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!
Search Again
Page 4 of 10
  1. Eric Viglotti
    Post

    Solved R1+ Adhesion for PETG

    Perfect. Ok, I guess I will stop fiddling with the Control > Z-Offset and "Store memory" command in the display. I thought that to be handy, but I...
    Post by: Eric Viglotti, Mar 12, 2018 in forum: Troubleshooting
  2. TKCC71
    Post

    Unresolved Simplify 3D issue?

    Still having the same problem. For some reason, I just cant nail down the offset issue? The M565 is in the start up script. Here's what it has...
    Post by: TKCC71, Mar 30, 2016 in forum: Troubleshooting
  3. mark tomlinson
    Post

    Solved R1+ not homing

    Can't speak specifically to Cura, but this : G28 ; home all axes G1 Z5 F5000 ; lift Z by 5mm M565 Z-1.0 ; set the offset for auto-leveling...
    Post by: mark tomlinson, Dec 13, 2017 in forum: Troubleshooting
  4. danzca6
    Post

    Solved Simplify 3D/MatterControl AutoLeveling is way off

    One thing I see in you start gcode snippet is you aren't setting your z offset. Did you just leave that out or are you sending the M565 command...
    Post by: danzca6, Sep 14, 2016 in forum: Troubleshooting
  5. mark tomlinson
    Post

    Solved First few layers not printing correctly

    You are missing the M565 (which explains the dragging): G28 ; home all axes M565 Z-1.0 ; set the offset for auto-leveling mechanism G29 ; run...
    Post by: mark tomlinson, Jan 5, 2017 in forum: Troubleshooting
  6. Ed Neugebauer
    Post

    Unresolved No material extrusion during print

    I got it working finally setting z offset to -1 using th m565 command, and manually turning the left threaded rod for the z axis clockwise about a...
    Post by: Ed Neugebauer, Jul 20, 2016 in forum: Troubleshooting
  7. mark tomlinson
    Post

    Answered S3D auto level issues

    No clue if there is a "default" value. If you did not add the M565 to the startup Gcode block then <shrug> You startup GCode should be something...
    Post by: mark tomlinson, Apr 23, 2017 in forum: Troubleshooting
  8. mark tomlinson
    Post

    Answered Robo 3D R1 plus with RepRap Discount Full Graphics Display printing too close to the glass.

    Yes, use the autoleveling Z offset command (M565) in the startup GCode in the slicer. Pretty sure it this is in the FAQ:...
    Post by: mark tomlinson, Jun 12, 2019 in forum: Troubleshooting
  9. 3dfun4me
    Post

    Community Favorite Marlin 1.1.9 Release for Robo R1+

    Put the prefix in manually... community.robo3d.com/index.php?threads/revamped-m565-z-offset-set-it-and-forget-it.4748/ You can query M565 to...
    Post by: 3dfun4me, Nov 5, 2018 in forum: Mods and Upgrades
  10. mark tomlinson
    Post

    Solved First Timer

    The Initial Gcode needs to be M565 for the ABL: G28 ; home all axes G1 Z5 F5000 ; lift Z by 5mm M565 Z-1.0 ; set the offset for auto-leveling...
    Post by: mark tomlinson, Oct 18, 2016 in forum: Troubleshooting
  11. aznhlfan
    Post

    Cura Ignoring Z-Offset after Auto Level Robo R1+

    So if I took out the G29 ;Run Auto Level line out, would it then not run the 9 point auto level and use the Z offset i entered in the M565 line?...
    Post by: aznhlfan, Jun 29, 2017 in forum: General Questions
  12. mark tomlinson
    Post

    Solved Nozzle too close to bed on first layer

    negative numbers are further from the bed, positive numbers are closer to the bed. There is your problem. It should start at-1, not+1
    Post by: mark tomlinson, Jun 24, 2016 in forum: Troubleshooting
  13. NaughtyGarfield
    Post

    Solved Simplify3D Print Bed Calibration Issues

    Hahah, Thank you guys!! You both said the same.. I wonder why my default doesn't give me that M565 Z-1 ; set the offset for auto-leveling...
    Post by: NaughtyGarfield, Jun 8, 2016 in forum: Troubleshooting
  14. David Avila
    Post

    Solved first couple layers are bad

    ok this is it G92 E0 ; M565 Z-1 ; G1 Z5 F5000 ; G29 ; M201 X500 Y500 Z500 E1000;
    Post by: David Avila, Sep 13, 2017 in forum: Troubleshooting
  15. mark tomlinson
    Post

    Unanswered Autoleveling using cura

    In the startup GCode block: G28; home all axes M565 Z-.85;define z offset (default 1.0mm) G29 ; probe the bed everything after the ";" is...
    Post by: mark tomlinson, Apr 16, 2017 in forum: Troubleshooting
  16. mark tomlinson
    Post

    Unanswered T-Glase not sticking

    It is needed. It should be in the startup gcode (where ever your software defines that). Mine looks like this: G28 ; home all axes G1 Z5 F5000 ;...
    Post by: mark tomlinson, Mar 23, 2016 in forum: Troubleshooting
  17. mark tomlinson
    Post

    Solved print wont stick into bed

    The M565 (startup GCode section) is what sets the Z offset for the slicer. The default is M565 Z-1.0 Which sets it to a 1mm and you need to go...
    Post by: mark tomlinson, Jun 11, 2017 in forum: Troubleshooting
  18. Titaniumboy
    Post

    Solved Robo Beta does not connect with controller

    I have a Beta and don’t have Auto-Level. Yet.
    Post by: Titaniumboy, Dec 11, 2019 in forum: Troubleshooting
  19. mark tomlinson
    Post

    Made the jump to S3D - yikes

    Like @Geof said that is all you need. Set it in the process startup script. Do NOT set any global offset anywhere else. That order is very...
    Post by: mark tomlinson, Mar 30, 2019 in forum: General Questions
  20. WheresWaldo
    Post

    Solved Auto leveling will not work

    You may need to set a Z Offset using M565 in your start up script, place it between the G28 and G29 and start with M565 Z-1.0 then if it's too far...
    Post by: WheresWaldo, Feb 11, 2017 in forum: Troubleshooting
Showing results 61 to 80 of 200 Next >
Search Again
Page 4 of 10