1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Answered Auto leveling issue

Discussion in 'Troubleshooting' started by KelticRD, Apr 2, 2017.

  1. KelticRD

    KelticRD New Member

    Joined:
    Nov 9, 2016
    Messages:
    4
    Likes Received:
    1
    ROBO 3d R1+
    Issue: The auto leveling sequence has stooped working correctly.
    It will level on the left side, but will not touch in the middle, then goes up on the right side.
    I have adjusted switches on the sides several times in an attempt to resolve the issue, this doesn't work. I have also verified that the area appears to be clear.
    Please see the video as it might be easier to understand than my description:


    thank you for any assistance.
     
    #1 KelticRD, Apr 2, 2017
  2. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,757
    Likes Received:
    2,339
    #2 Geof, Apr 3, 2017
    mark tomlinson likes this.
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    Sounds like it needs a little lubrication on the threaded rods. (Lithium grease works well)
     
    #3 mark tomlinson, Apr 3, 2017

Share This Page