1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unresolved bad print quality

Discussion in 'Troubleshooting' started by itemsyd, Feb 18, 2015.

  1. itemsyd

    itemsyd New Member

    Joined:
    Feb 18, 2015
    Messages:
    3
    Likes Received:
    0
    Good day ....

    i received my robo r1 from just 2 days and we don't have experience over 3D printing when we print we found this result ( attached image ) we use mattercontrol 1.2 on windows 8 and 7 ... so i want to know what is the cause of this issue and how can i fix it ..

    Thanks
     

    Attached Files:

    #1 itemsyd, Feb 18, 2015
  2. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,276
    You're too high. If you're using the Automatic Print Utility in Matter Control, disable it.

    Otherwise if you have an offset reduce it.
     
    #2 Mike Kelly, Feb 18, 2015
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    You have a lot to learn then, there is a lot of good information already here on the forum. Welcome and good luck.
     
    #3 mark tomlinson, Feb 19, 2015

Share This Page