1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Colorfabb Woodfill Success.

Discussion in 'Show and Tell' started by Ogbo14, Sep 10, 2017.

  1. Ogbo14

    Ogbo14 New Member

    Joined:
    Aug 6, 2017
    Messages:
    18
    Likes Received:
    8
    After some adjustments to S3D, filament loading and patience I was able to print this groot.
    [​IMG]
    Sent from my SM-N910V using Tapatalk
     
    #1 Ogbo14, Sep 10, 2017
    Last edited: Sep 10, 2017
    Ed Ferguson, mark tomlinson and Geof like this.
  2. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,665
    Likes Received:
    2,291
    congrats looks good.
     
  3. denisvic

    denisvic New Member

    Joined:
    Sep 18, 2017
    Messages:
    4
    Likes Received:
    2
    @Ogbo14 Could you share your settings ?
     
  4. Ogbo14

    Ogbo14 New Member

    Joined:
    Aug 6, 2017
    Messages:
    18
    Likes Received:
    8
    Temp 220, bed 60, fan speed 60, print speed 1800, 0.16 layer height.

    Do not use the pfte tubing as the filament sits really tight inside the tube. I found that I needed to hang the spool over the printer for consistent extrusion.

    Sent from my SM-N950U using Tapatalk
     

Share This Page