1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Finally printed a good test cube. Now clogged extruder

Discussion in 'Troubleshooting' started by Swoop_ds, Nov 1, 2014.

Thread Status:
Not open for further replies.
Page 2 of 2
  1. Swoop_ds

    Swoop_ds New Member

    Joined:
    Sep 8, 2014
    Messages:
    19
    Likes Received:
    4
    at this point, with a super clogged hotend, (possibly damaged inside?) and with a possibly broken thermistor. Should I just get an e3d v5 or v6?

    Also, do those things come assembled with the thermistor in place or is it a whole process to put them together? (There seems to be a bunch of different 'kits' on their site and I'm not really understanding which one I need and whether they come assembled
     
    #21 Swoop_ds, Nov 4, 2014
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,917
    Likes Received:
    7,338
    No, they are assembly required (which really means just adding the thermistor and nozzle).
     
    #22 mark tomlinson, Nov 4, 2014
  3. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,277
    #23 Mike Kelly, Nov 4, 2014
Page 2 of 2
Thread Status:
Not open for further replies.

Share This Page