1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

FULL GRAPHIC CONTROLLER

Discussion in 'General Questions' started by Simonpackman1, Aug 20, 2015.

  1. Simonpackman1

    Simonpackman1 Member

    Joined:
    Jun 16, 2015
    Messages:
    136
    Likes Received:
    6
    I recently Purchased the reprap discount full graphic controller. I was wondering how I could remove the 2nd and 3rd print head from the display.
     
    #1 Simonpackman1, Aug 20, 2015
  2. Simonpackman1

    Simonpackman1 Member

    Joined:
    Jun 16, 2015
    Messages:
    136
    Likes Received:
    6
    it would also be nice to have a home option for each axis. I'm trying to navigate the the arduino software and I have little knowledge about programming. I took a C programming course but I didn't really learn much.
     
    #2 Simonpackman1, Aug 20, 2015
  3. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    There is no easy way to mod Marlin. It is some of the most disorganized code I have ever seen. But there is hope, I am using 1.1.0 dev and it only displays as many extruders and heaters as you actually have configured.
     
    #3 WheresWaldo, Aug 20, 2015
  4. Simonpackman1

    Simonpackman1 Member

    Joined:
    Jun 16, 2015
    Messages:
    136
    Likes Received:
    6
    I'm not familiar with this at all. What is 1.1.0 dev?
     
    #4 Simonpackman1, Aug 20, 2015
  5. Simonpackman1

    Simonpackman1 Member

    Joined:
    Jun 16, 2015
    Messages:
    136
    Likes Received:
    6
    so i'm guess i cant just copy and paste some simple code into the dogm_lcd_implementation...
     
    #5 Simonpackman1, Aug 20, 2015
  6. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,917
    Likes Received:
    7,338
    Maybe, like @WheresWaldo said... it is a bit disorganized in the code.
    The 1.1.0 dev is the current branch of the softare/code used as the printer firmware.
    Robo does not use that version by default, but you can upgrade with some minor tweaks and there are good reasons to do that.

    There is a thread on this by @WheresWaldo if you are interested.
     
    #6 mark tomlinson, Aug 21, 2015
    WheresWaldo likes this.
  7. Simonpackman1

    Simonpackman1 Member

    Joined:
    Jun 16, 2015
    Messages:
    136
    Likes Received:
    6
    ok thank you
     
    #7 Simonpackman1, Aug 22, 2015

Share This Page