1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

help me! i have a question

Discussion in 'Troubleshooting' started by JunghoKim, Jul 15, 2014.

Thread Status:
Not open for further replies.
  1. JunghoKim

    JunghoKim New Member

    Joined:
    Jul 15, 2014
    Messages:
    9
    Likes Received:
    0
    sorry i'm south korea well can't english sorry

    i want to make stuff
    no.1
    제목 없음1.jpg
    no.2
    제목 없음.jpg
    but ROBO 3D make
    사진 (1).JPG
    and
    사진.JPG

    how use to matter control options setting no.1 and no.2 picture stuff make?
     
    #1 JunghoKim, Jul 15, 2014
  2. JunghoKim

    JunghoKim New Member

    Joined:
    Jul 15, 2014
    Messages:
    9
    Likes Received:
    0
    i'm use solidworks! and i have robo 3d printer not bed Temperature
     
    #2 JunghoKim, Jul 15, 2014
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,914
    Likes Received:
    7,338
    Disregarding what you are printing...

    It looks like you have either one or more loose belts or slipping set screws on the pulleys (or some combination of both). I would suggest you :
    1) Tighten the belts
    2) check all pulley set screws and loctite.
     
    #3 mark tomlinson, Jul 15, 2014
    2 people like this.
  4. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,277
    I'd put money on pulley set screw
     
    #4 Mike Kelly, Jul 15, 2014
  5. JunghoKim

    JunghoKim New Member

    Joined:
    Jul 15, 2014
    Messages:
    9
    Likes Received:
    0
    oh very thank you mark and mike!
     
    #5 JunghoKim, Jul 15, 2014
  6. Peter Krska

    Peter Krska Active Member

    Joined:
    Nov 30, 2013
    Messages:
    766
    Likes Received:
    229
    [​IMG][​IMG]

    Under the bed, tighten everything.


    Sent from my iPhone using Tapatalk in Canada
     
    #6 Peter Krska, Jul 15, 2014
  7. JunghoKim

    JunghoKim New Member

    Joined:
    Jul 15, 2014
    Messages:
    9
    Likes Received:
    0
    oh peter very very thank you!
     
    #7 JunghoKim, Jul 15, 2014
Thread Status:
Not open for further replies.

Share This Page