1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Installing the Smart XXL Display on a WHITE Ramps Bd

Discussion in 'Troubleshooting' started by Mooky, May 5, 2015.

  1. Mooky

    Mooky New Member

    Joined:
    Apr 28, 2015
    Messages:
    16
    Likes Received:
    1
    As the title says I just received my printer and it has the white controller board so when I go to connect my display connector, in one direction the 8 pin header hangs in free air and in the other direction it would be blocked by an existing 8 pin connector on AUX-3. Where do I go from here? Thanks!
     
    #1 Mooky, May 5, 2015
  2. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,277
    Unplug the connector on Aux-3. That's for the micro sd card reader and since you're using an LCD with an sd card reader it's no longer needed
     
    #2 Mike Kelly, May 5, 2015
    Mooky likes this.
  3. Mooky

    Mooky New Member

    Joined:
    Apr 28, 2015
    Messages:
    16
    Likes Received:
    1
    Thank You Michael I guess it really is as easy as they claim. I just didn't want to break my new printer. Some people call me Mooky an others call me Sparky. Both are well earned nicks! :)
     
    #3 Mooky, May 5, 2015
  4. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,277
    Better to ask and know for sure than to make a mistake :) That's what we're here for
     
    #4 Mike Kelly, May 5, 2015
    mark tomlinson and jbigler1986 like this.

Share This Page