Answered jst connectors on heater or R1???

Anyone know what jst connectors Robo is using on the heaters for the new R1?
I asked robo 2 weeks ago and no response. I want to replace in kind, because my connectors were too big and are limiting axis movement.

Thanks

 

JST Waterproof connectors http://www.amazon.com/10Pairs-13cm-...831&sr=8-1&keywords=JST+waterproof+connectors

 

Thanks, ordered!

Figured out what happened. The first order from 3 weeks was filled with the wrong parts.

 

I just received the JST connectors from the vendor and they sent me the wrong item and do not carry that connector. They said quote "We have wrongly listed the product. We do not sell the one you need"

 

Greasaaaaat!!!

 

@Dbeal from uxcell?

 

I ordered from HQ-master they are refunding me, so lets see if the 2nd go around works out.

 

Mine was also from Hq-master and they are refunding me completely.

 

jst connector info: http://www.jst-mfg.com/product/pdf/eng/eSM.pdf

You can buy the crimp pins here,
male: http://www.newark.com/jst-japan-sol...1t-p0-6/contact-pin-28-22awg-crimp/dp/68C7943

female: https://www.newark.com/webapp/wcs/s...JL/3c6NJJkifJ/QlIg=&ddkey=http:PF404ErrorView

unfortunately the plastic male/female connectors are only in stock in the UK. So I order the preassembled pigtails from amazon, and will disassemble them, so I can crimp the male and female pins on my wires directly without splices.

Overkill and OCD maybe, but reduces the likelihood of points of failure and I do not want to stiffen the cables with added splices.

Everything is on order, so I can not confirm that what I have found is truly valid.
To be continued...