1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Might try this as a project, replace R2 board with this 32-bit one

Discussion in 'Off Topic' started by WheresWaldo, Jun 21, 2019.

  1. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    [​IMG]
    This one is from Biqu and includes the new TMC2209

    [​IMG]
    This one is from Fysetc also with the new TMC2209

    Both are around $30 on AliExpress.
     
  2. albert3d

    albert3d Member

    Joined:
    Feb 3, 2018
    Messages:
    70
    Likes Received:
    28
    I kind of like this one https://www.amazon.com/gp/product/B07P72KGTQ so that you can swap out drivers if you want. Granted it's a bit more expensive but has some good features. IF my board ever quits on me, this is what I currently plan on replacing it with.
     
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,957
    Likes Received:
    7,344
    It is less expensive than an Arduino and RAMPS :) (at least most combination kits)
     
  4. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    @albert3d I have that board too, but an all in one solution would make it about $40-60 cheaper than buying the 4 driver boards with the board you pointed to. Give me more money to build an adapter cable to the R2 wiring harness.
     
  5. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    #5 WheresWaldo, Jun 21, 2019
    Last edited: Jun 21, 2019

Share This Page