1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Need some help

Discussion in 'Technical Support' started by mark tomlinson, Oct 21, 2013.

  1. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,537
    Likes Received:
    7,061
  2. Coby Robo 3D

    Coby Robo 3D Administrator
    Staff Member

    Joined:
    Feb 20, 2013
    Messages:
    75
    Likes Received:
    108
    Just posted on the other feed. Take a look let me know
     
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,537
    Likes Received:
    7,061
    Is there supposed to be one or two allen screws in that pulley (the one for the X travel)?
    I noticed I only had one and it HAD gotten loose when I was trying to retighten the belt (which as it turns out was fine).

    I am going to use some threadlock on that bad-boy, but was curious if there were indeed supposed to be two in there or not.

    Thanks.
     
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,537
    Likes Received:
    7,061
    I guess this is moot at this point.
     

Share This Page