1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved New Printer not extrudeing

Discussion in 'Troubleshooting' started by Taylor, Jan 20, 2015.

Thread Status:
Not open for further replies.
Page 2 of 2
  1. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,277
    Hmm that doesn't make sense. I'm not a huge fan of mattercontrol because of weird things like this.

    Maybe try putting G29 after the first G28 and see if it works.
     
    #21 Mike Kelly, Jan 20, 2015
    2 people like this.
  2. Taylor

    Taylor Member

    Joined:
    Mar 10, 2014
    Messages:
    109
    Likes Received:
    13
    So I justed had MC do my own STL file and sure enough it finally auto leveled itself. Auto level is still turned off in MC also.
     
    #22 Taylor, Jan 20, 2015
  3. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,277
    Well that is bizarre! I wonder if it's already G-code...


    Maybe try doing Export > Gcode for base files
     
    #23 Mike Kelly, Jan 20, 2015
  4. Taylor

    Taylor Member

    Joined:
    Mar 10, 2014
    Messages:
    109
    Likes Received:
    13
    Yea Ill have to check it out. So to be clear I do NOT turn Auto Level ON in MC correct?
     
    #24 Taylor, Jan 20, 2015
  5. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,277
    coreect. Automatic print leveling should be disabled.
     
    #25 Mike Kelly, Jan 20, 2015
    2 people like this.
  6. Taylor

    Taylor Member

    Joined:
    Mar 10, 2014
    Messages:
    109
    Likes Received:
    13
    Gotcha,Mike thank you so much! Without you I would of been still here trying to figure this out.
     
    #26 Taylor, Jan 20, 2015
  7. Taylor

    Taylor Member

    Joined:
    Mar 10, 2014
    Messages:
    109
    Likes Received:
    13
    It started to do it again,where it wouldnt level. I put the G29 right after G28 and it now works. I left out the part where it says "Bed Probing" is that ok?
     
    #27 Taylor, Jan 20, 2015
  8. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,277
    #28 Mike Kelly, Jan 20, 2015
  9. Taylor

    Taylor Member

    Joined:
    Mar 10, 2014
    Messages:
    109
    Likes Received:
    13
    Nope it's doing it to other files. But as soon as I swapped around that G code it worked right away.

    I actually own S3D but am having troubles with setting it up,the printer would hear the extruder and bed up then it would move the extruder a bit and then goes back to saying heating extruder but the temperature actually starts decreasing. Is there a guide on how to set it up? I do have the Robo picked as the preset in S3D. I'm just taking one thing at a time. I'm just so happy,the printer is working and no problems.
     
    #29 Taylor, Jan 20, 2015
Page 2 of 2
Thread Status:
Not open for further replies.

Share This Page