1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Ninjaflex

Discussion in 'Off Topic' started by FlyMario, Apr 14, 2015.

  1. FlyMario

    FlyMario Member

    Joined:
    Apr 12, 2015
    Messages:
    42
    Likes Received:
    7
    I have the latest version of RoBo 3D with the changes (blue lights, rod stabilizer in top of case... etc).

    Have any of you tried Ninjaflex with your RoBo 3D? What are your experiences.

    I can so imagine robot wheels and tank treads. Lots of fun to be had but not at the cost of hurting my printer.

    Thanks,
    FlyMario
     
    #1 FlyMario, Apr 14, 2015
  2. jbigler1986

    jbigler1986 Active Member

    Joined:
    Feb 13, 2015
    Messages:
    534
    Likes Received:
    128
    There are settings to be changed for sure. A lot of people have printed with it without much of an issue. Look around the forum and you will find others that have used it successfully.
     
    #2 jbigler1986, Apr 14, 2015
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    #3 mark tomlinson, Apr 14, 2015
    Mike Kelly and FlyMario like this.
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    I like SemiFlex better, but there ya go.
     
    #4 mark tomlinson, Apr 14, 2015
    Printed Solid likes this.
  5. Printed Solid

    Printed Solid Volunteer Admin
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    1,605
    Likes Received:
    1,003
    I second semiflex. I have tried it on a few other stock printers, so I think it can be printed on a stock robo, but haven't had a chance to give it a try yet.
     
    #5 Printed Solid, Apr 17, 2015
  6. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    I still use my NinjaFlex feed tube with it, but I am not certain it really needs it. It really does need to print slow... even with my feed tube I have gotten it to play 'Wrap Around The Hobb"* if I try printing it too fast.


    *that is a crappy game BTW
     
    #6 mark tomlinson, Apr 17, 2015

Share This Page