1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unresolved Printer issues

Discussion in 'Troubleshooting' started by LanceJimenez96, Nov 2, 2016.

  1. LanceJimenez96

    LanceJimenez96 New Member

    Joined:
    Nov 2, 2016
    Messages:
    1
    Likes Received:
    0
    unnamed.jpg any ideas on how to fix this and reduce stringing
     
    #1 LanceJimenez96, Nov 2, 2016
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    Stringing for PLA and ABS is usually a symptom that you are printing too hot.
    You can also try increasing the retraction settings.
     
    #2 mark tomlinson, Nov 2, 2016
  3. danzca6

    danzca6 Well-Known Member

    Joined:
    Jul 27, 2015
    Messages:
    2,161
    Likes Received:
    1,077
    #3 danzca6, Nov 2, 2016
    Geof and mark tomlinson like this.
  4. Rigmarol

    Rigmarol Well-Known Member

    Joined:
    May 14, 2016
    Messages:
    544
    Likes Received:
    280
    I had similar issues early on and reducing nozzle temp from 210c to 190c fixed it for me.
     
    #4 Rigmarol, Nov 3, 2016

Share This Page