1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Resin printers

Discussion in 'Off Topic' started by tkoco, Feb 2, 2020.

  1. tkoco

    tkoco - -.- --- -.-. ---
    Staff Member

    Joined:
    May 7, 2018
    Messages:
    451
    Likes Received:
    181
    I'm looking at a larger DLP printer with a print volume slightly larger than the C2 printer. And I was cataloging the various color resins available on Amazon.
     
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,903
    Likes Received:
    7,100
  3. tkoco

    tkoco - -.- --- -.-. ---
    Staff Member

    Joined:
    May 7, 2018
    Messages:
    451
    Likes Received:
    181
  4. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    21,903
    Likes Received:
    7,100
    Have never heard of them, but just check the resolution to see if you are actually gaining anything or just getting wider spaced pixels (1080i at a 4x2 or 1080i at 5x5 is actually not better resolution). This is 2k x 2k across that size so not bad by any stretch
     
  5. tkoco

    tkoco - -.- --- -.-. ---
    Staff Member

    Joined:
    May 7, 2018
    Messages:
    451
    Likes Received:
    181
    75 micron pixel size - I could live with that considering that the FDM pixel (line width) is typically 400 micron.
     
  6. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,902
    Likes Received:
    3,578
    @tkoco that was one of the printers I was looking at also. There are only a handful of reviews on YouTube, but they are all basically the same in this price range. All use the same control board, with only cosmetic changes to the UI and all use Chitu Slicer.
     

Share This Page