Shoutbox Archive

Mar 16, 2015 12:57 AM - Mike Glass: Gummie Bears from Printed Solid
Mar 16, 2015 12:57 AM - jbigler1986: Not this time. Last time I did
Mar 16, 2015 12:58 AM - Mike Glass: I didnt get any the first time.
Mar 16, 2015 12:59 AM - Mike Glass: I can print hip replacements now..now were in the money..lol
Mar 16, 2015 1:11 AM - Mike Kelly: woops
Mar 16, 2015 1:11 AM - Mike Kelly: man the stupid rep2x keeps failing to print on a hips raft
Mar 16, 2015 1:11 AM - Mike Kelly: super annoying
Mar 16, 2015 1:14 AM - Mike Kelly: i guess i should just use makerware, ugh
Mar 16, 2015 1:15 AM - jbigler1986: How is that software
Mar 16, 2015 1:16 AM - Mike Kelly: makerware's actually pretty good
Mar 16, 2015 1:16 AM - Mike Kelly: super limited but it's easy to use
Mar 16, 2015 1:16 AM - Mike Kelly: you can do a lot more with profiles
Mar 16, 2015 1:17 AM - Mike Kelly: but that's all code editing basically
Mar 16, 2015 1:28 AM - Mike Glass: http://imgur.com/yNJVMbh nice
Mar 16, 2015 1:28 AM - Mike Kelly: yowch
Mar 16, 2015 1:29 AM - Mike Glass: Robo replacements are awesome.
Mar 16, 2015 1:32 AM - Mike Glass: thats what I waited a month for..
Mar 16, 2015 1:32 AM - jbigler1986: Damn
Mar 16, 2015 1:32 AM - Mike Glass: pulled them out yesterday to swap and one cut me.
Mar 16, 2015 1:33 AM - jbigler1986: What temp were you running with abs and .8 nozzle
Mar 16, 2015 1:39 AM - Mike Glass: damn workstation locked up.
Mar 16, 2015 1:39 AM - Mike Glass: I was running xt so 240, abs probably 230
Mar 16, 2015 2:10 AM - Mike Kelly: sweet get to waste my time designing a fake version of a system that probably won't ever be bought
Mar 16, 2015 2:22 AM - BryZad: hey does any one have sujestions for a cable guide for the bed wires the on thinking verse is binding up
Mar 16, 2015 2:23 AM - BryZad: or should I just run silicone wire and wire loom
Mar 16, 2015 2:31 AM - Mike Kelly: don's is pretty good
Mar 16, 2015 2:32 AM - BryZad: is it the blue and black one on thingie?
Mar 16, 2015 2:32 AM - Mike Kelly: sure
Mar 16, 2015 2:33 AM - BryZad: ha ha
Mar 16, 2015 2:37 AM - BryZad: http://www.thingiverse.com/thing:595308
Mar 16, 2015 2:38 AM - BryZad: that one ?
Mar 16, 2015 2:39 AM - jbigler1986: Got the nozzle installed and running
Mar 16, 2015 2:39 AM - Mike Kelly: probably not
Mar 16, 2015 2:40 AM - jbigler1986: Damn camera is messed up so I can't watch it. Oh well
Mar 16, 2015 2:41 AM - Mike Kelly: yeah my camera is pointed up so i have no idea how my print is going
Mar 16, 2015 2:42 AM - jbigler1986: Just spaghetti if it fails. No biggie. But it should be fine
Mar 16, 2015 2:43 AM - BryZad: I wonder if just cheap black wire loom would work better
Mar 16, 2015 2:45 AM - Mike Kelly: whats wrong with the chain you printed
Mar 16, 2015 2:47 AM - BryZad: its seems like it is sagging and binding the y axis
Mar 16, 2015 2:48 AM - Mike Kelly: do you know or are you guessing
Mar 16, 2015 2:48 AM - BryZad: I have seen it
Mar 16, 2015 2:48 AM - Mike Kelly: what is sagging
Mar 16, 2015 2:48 AM - BryZad: it works just binds up randomly
Mar 16, 2015 2:48 AM - Mike Kelly: you should print don's versions instead of galaxius
Mar 16, 2015 2:49 AM - BryZad: the chain its self
Mar 16, 2015 2:49 AM - Mike Kelly: for the end parts
Mar 16, 2015 2:49 AM - Mike Kelly: i've been using it for months with no issues
Mar 16, 2015 2:49 AM - BryZad: where's dons version ?
Mar 16, 2015 2:49 AM - Mike Kelly: check the remix
Mar 16, 2015 2:49 AM - BryZad: is that the one he remixed
Mar 16, 2015 2:49 AM - Mike Kelly: don's is the original
Mar 16, 2015 2:56 AM - BryZad: I just see the smooth rod upgrade no cable link
Mar 16, 2015 2:57 AM - Mike Kelly: you're not looking very hard
Mar 16, 2015 2:57 AM - Stephen Capistron: http://www.thingiverse.com/thing:384066
Mar 16, 2015 2:59 AM - Mike Kelly: https://plus.google.com/u/1/106488214448755298691/posts/YfQhicUVKSh?cfem=1 this is cool
Mar 16, 2015 3:00 AM - BryZad: my bad mike looking on my phone wasn't able to get to the remix
Mar 16, 2015 3:01 AM - jbigler1986: Mike. The tool holder is going to take me a total of 4 hours to print with the .8 nozzle. Awesome.
Mar 16, 2015 3:02 AM - Mike Kelly: it's ok i just have like no patience right now cause i'm working on the stupidest waste of time project
Mar 16, 2015 3:02 AM - Mike Kelly: very nice bigler
Mar 16, 2015 3:02 AM - Mike Kelly: what did your design end up looking like
Mar 16, 2015 3:04 AM - BryZad: that's the same chain I am using I am wondering if I should print the links in abs
Mar 16, 2015 3:04 AM - BryZad: wonder if the heat bed is warping the other links being right under the heat plate
Mar 16, 2015 3:05 AM - Stephen Capistron: if i remember right PLA is a bit temperature sensitive for that location on the printer.
Mar 16, 2015 3:05 AM - jbigler1986: I just took MG's and just added some "engraving". I was going to change a few things but I really liked what all he added
Mar 16, 2015 3:06 AM - Mike Kelly: if you printed it in PLA and are going over like 50C on the bed, then absolutely you need to use ABS
Mar 16, 2015 3:06 AM - Mike Kelly: i guess i never saw MG's
Mar 16, 2015 3:07 AM - BryZad: I print most prints at 60 c on the bed
Mar 16, 2015 3:07 AM - Mike Kelly: then yes that's a bad idea
Mar 16, 2015 3:07 AM - Mike Glass: http://i.imgur.com/HvcIgpg.jpg
Mar 16, 2015 3:08 AM - Mike Kelly: cool mike
Mar 16, 2015 3:08 AM - Mike Glass: crap thats revision 5, I dont have 6 yet
Mar 16, 2015 3:08 AM - BryZad: is that a tool holder for the RoBo tools
Mar 16, 2015 3:08 AM - BryZad: what did you do to modle it in ?
Mar 16, 2015 3:09 AM - Mike Glass: Solidworks
Mar 16, 2015 3:09 AM - Mike Kelly: this design i'm doing makes my blood boil
Mar 16, 2015 3:09 AM - Mike Kelly: it's so freaking stupid
Mar 16, 2015 3:09 AM - Mike Kelly: none of it makes any sense
Mar 16, 2015 3:09 AM - Mike Kelly: such a boondoggle
Mar 16, 2015 3:10 AM - Mike Kelly: i mean you have a 27' column that needs to go inside a shipping container and then be lifted vertically on arrival while still having a connected refriigeration section
Mar 16, 2015 3:10 AM - Mike Glass: http://imgur.com/VecrLf2 here is v6 v7 comming with a few mods
Mar 16, 2015 3:11 AM - jbigler1986: MG did you have any issues after first installing your .8 nozzle?
Mar 16, 2015 3:12 AM - Mike Glass: like what? I dont recall any issues.
Mar 16, 2015 3:12 AM - Mike Glass: other that it ozzes alot more
Mar 16, 2015 3:14 AM - jbigler1986: Just wondering. Can't watch my print so just seeing if you had any issues printing after installing it
Mar 16, 2015 3:16 AM - Mike Glass: how did you remote install your nozzle?
Mar 16, 2015 3:17 AM - jbigler1986: Lol. I went home for lunch and changed it
Mar 16, 2015 3:17 AM - BryZad: http://rs1353.pbsrc.com/albums/q666/BryZad/IMG_20150315_153456539_zpsbsce4cb1.jpg~320x480
Mar 16, 2015 3:17 AM - jbigler1986: Stupid camera quit working right when I left
Mar 16, 2015 3:17 AM - Jacob Kirsch: hey all... Looking for some suggestions on how to fix "ringing"
Mar 16, 2015 3:17 AM - Mike Glass: ah ok.
Mar 16, 2015 3:18 AM - Jacob Kirsch: tried to slow down the print speed and acceleration, but still have the issue
Mar 16, 2015 3:18 AM - BryZad: that's the new project I am going make print worthy
Mar 16, 2015 3:18 AM - jbigler1986: SO I might have lots of spaghetti for dinner. Lol
Mar 16, 2015 3:18 AM - Jacob Kirsch: wondering if adding supports on the vertical Z rods will help?
Mar 16, 2015 3:18 AM - Mike Glass: look at ziggy's document on that jacob
Mar 16, 2015 3:19 AM - jbigler1986: I have faith in my Robo though
Mar 16, 2015 3:19 AM - jbigler1986: Are there any linux tablets out there?
Mar 16, 2015 3:19 AM - Mike Glass: I used ball bearing on my z rods and adjusted and completely got rid of it.
Mar 16, 2015 3:19 AM - Mike Glass: android is linux
Mar 16, 2015 3:20 AM - Mike Glass: chromebook is linux

 

Mar 16, 2015 3:20 AM - Jacob Kirsch: Mike, are there details explaining that? Not sure what you mean...
Mar 16, 2015 3:20 AM - Mike Glass: Apple is well, apple
Mar 16, 2015 3:20 AM - jbigler1986: Screw apple. Not open enough for me
Mar 16, 2015 3:21 AM - Jacob Kirsch: apple is unix
Mar 16, 2015 3:21 AM - Jacob Kirsch: darwin to be precise
Mar 16, 2015 3:21 AM - Mike Kelly: jacob what do you mean by ringing
Mar 16, 2015 3:22 AM - Mike Kelly: like resonance?
Mar 16, 2015 3:22 AM - Mike Glass: http://community.robo3d.com/index.p...facts-known-issues-and-fixes.2576/#post-19726
Mar 16, 2015 3:22 AM - BryZad: mike G got ride of auto level ?
Mar 16, 2015 3:23 AM - Mike Glass: No still have auto Level
Mar 16, 2015 3:23 AM - Mike Glass: or should say auto compensate
Mar 16, 2015 3:23 AM - Jacob Kirsch: no; these are artifacts that appear to the side of something like a gap or corner
Mar 16, 2015 3:24 AM - Mike Glass: thats a heat issue
Mar 16, 2015 3:24 AM - Mike Kelly: pictures
Mar 16, 2015 3:24 AM - Mike Glass: do you have dual fans?
Mar 16, 2015 3:24 AM - Jacob Kirsch: no
Mar 16, 2015 3:24 AM - Jacob Kirsch: tho with ABS, should i have fans?
Mar 16, 2015 3:24 AM - Mike Glass: thats your problem
Mar 16, 2015 3:25 AM - Mike Kelly: no
Mar 16, 2015 3:25 AM - Mike Glass: depends on the size, most will tell you no
Mar 16, 2015 3:25 AM - Mike Kelly: really hard to diagnose a print problems from words, pictures say more
Mar 16, 2015 3:26 AM - Mike Glass: IMO you can run the fan on abs, but only for very small parts.
Mar 16, 2015 3:26 AM - Jacob Kirsch: I forgot the parts at home; trying to find an example
Mar 16, 2015 3:27 AM - Jacob Kirsch: printing robo black abs at 230C
Mar 16, 2015 3:27 AM - BryZad: hey mike can you run to parts fans off the same fan circuit or should the be ran as separate lines to the ramps ?
Mar 16, 2015 3:27 AM - Mike Kelly: you can run 2 in parallel no problem
Mar 16, 2015 3:27 AM - Jacob Kirsch: http://thingiverse-production.s3.amazonaws.com/renders/bc/d5/47/4c/c0/_7280628_preview_featured.jpg
Mar 16, 2015 3:28 AM - Mike Kelly: http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide#ringing
Mar 16, 2015 3:28 AM - BryZad: should they both have there own sets of wires to the ramps or could you splice in ?
Mar 16, 2015 3:28 AM - Mike Glass: for that size your too hot.
Mar 16, 2015 3:28 AM - Jacob Kirsch: tried printing at 25mm/s, and reduced accel to 600
Mar 16, 2015 3:29 AM - Jacob Kirsch: helped a little, but not too much
Mar 16, 2015 3:31 AM - BryZad: I might do things over kill ha ha
Mar 16, 2015 3:31 AM - Mike Glass: JB to you want Rev7?
Mar 16, 2015 3:31 AM - Mike Kelly: splicing is fine
Mar 16, 2015 3:31 AM - Mike Glass: do
Mar 16, 2015 3:32 AM - Mike Glass: THe fans only take what .06 amps
Mar 16, 2015 3:33 AM - jbigler1986: What's the difference on rev7
Mar 16, 2015 3:33 AM - Jacob Kirsch: Mike Kelly, yeah, I tried the accel thing. Is 230C excessive heat for abs?
Mar 16, 2015 3:33 AM - BryZad: cool cool might add a second parts fan after reprinting cable chain
Mar 16, 2015 3:34 AM - Mike Kelly: no 230 is fine
Mar 16, 2015 3:34 AM - jbigler1986: You need 270 for ABS
Mar 16, 2015 3:34 AM - jbigler1986: JK
Mar 16, 2015 3:34 AM - Mike Glass: changed the color..lol no just made the scraper sit back a little further in the groove.
Mar 16, 2015 3:34 AM - jbigler1986: Don't listen to me
Mar 16, 2015 3:34 AM - Jacob Kirsch: are folks rotating their prints so that flat edges are on a 45 degree angle?
Mar 16, 2015 3:34 AM - Jacob Kirsch: that's the only other thing there I haven't tried but seems silly
Mar 16, 2015 3:35 AM - Mike Glass: it works
Mar 16, 2015 3:35 AM - Mike Glass: at least on the test cubes i printed
Mar 16, 2015 3:35 AM - jbigler1986: Yeah I will take rev7
Mar 16, 2015 3:35 AM - jbigler1986: I like my scraper
Mar 16, 2015 3:35 AM - Mike Glass: ok, its on my site for $9.99
Mar 16, 2015 3:35 AM - Mike Glass: lol
Mar 16, 2015 3:36 AM - jbigler1986: hahahahah
Mar 16, 2015 3:36 AM - Mike Glass: Mike K will get royalties as well.
Mar 16, 2015 3:37 AM - jbigler1986: 1 million
Mar 16, 2015 3:39 AM - Mike Glass: You have been assimulated
Mar 16, 2015 3:39 AM - Mike Glass: and check your pm
Mar 16, 2015 3:41 AM - Mike Glass: Well my workstations of officially effed up. Time for a new one.
Mar 16, 2015 3:43 AM - Jacob Kirsch: for what it's worth, the prints are the heated enclosure brackets with the holes. Seeing the ringing next to the holes like in that sample, but not as bad
Mar 16, 2015 3:43 AM - Mike Kelly: my rep2x gets ringing really bad, never bothered to try and fix it
Mar 16, 2015 3:44 AM - Jacob Kirsch: maybe 3 ripples that fade out by the 4th
Mar 16, 2015 3:45 AM - Jacob Kirsch: gonna try the Z rod supports next...the latest revision has the Z rods supported at both ends so it shouldn't hurt
Mar 16, 2015 3:45 AM - Mike Kelly: do your rods run to the top?
Mar 16, 2015 3:46 AM - Jacob Kirsch: no, they added that practically the day after I got mine
Mar 16, 2015 3:46 AM - Mike Kelly: ah
Mar 16, 2015 3:46 AM - Mike Glass: def do that then
Mar 16, 2015 3:47 AM - jbigler1986:
Mar 16, 2015 3:47 AM - Mike Kelly: robo doesn't believe in consistency
Mar 16, 2015 3:47 AM - Mike Kelly: they flip flop more times than a primary candidate
Mar 16, 2015 3:47 AM - jbigler1986: I am in a really good mood for a Monday
Mar 16, 2015 3:47 AM - Mike Kelly: i could use some of that
Mar 16, 2015 3:47 AM - Mike Glass: Cause your in love JB
Mar 16, 2015 3:48 AM - Mike Glass: with your robo..lol
Mar 16, 2015 3:48 AM - jbigler1986: You live in Denver MK. There are plenty of good mood enhancers there
Mar 16, 2015 3:49 AM - Jacob Kirsch: http://www.thingiverse.com/thing:474115
Mar 16, 2015 3:49 AM - Mike Kelly: you'd think so but i can't for a number of reasons
Mar 16, 2015 3:49 AM - jbigler1986: Work? Probably reason 1
Mar 16, 2015 3:50 AM - jbigler1986: How do employers treat it ow that it's legal there?
Mar 16, 2015 3:50 AM - Mike Kelly: depends on the company
Mar 16, 2015 3:50 AM - Mike Kelly: if you work with oil & gas companies they want the employees tested
Mar 16, 2015 3:51 AM - Mike Glass: they now have 2 different smoking areas..lol
Mar 16, 2015 3:51 AM - Mike Kelly: and then a lot of insurance companies are still weird about it
Mar 16, 2015 3:51 AM - jbigler1986: Lol
Mar 16, 2015 3:51 AM - Mike Kelly: can't smoke in public
Mar 16, 2015 3:51 AM - jbigler1986: Which is understandable
Mar 16, 2015 3:52 AM - Mike Glass: im sure there is a term Public used loosely
Mar 16, 2015 3:52 AM - Mike Kelly: the bill was called "treat marijuana like alcohol" so yeah
Mar 16, 2015 3:52 AM - jbigler1986: I was in the military when I was there. So that sucked
Mar 16, 2015 3:52 AM - Mike Kelly: yeah any govt job you can't do it
Mar 16, 2015 3:52 AM - jbigler1986: I don't enjoy smoking it. I do like edibles though
Mar 16, 2015 3:52 AM - Mike Kelly: federal laws supercede
Mar 16, 2015 3:53 AM - Mike Glass: edibles, doesnt that just make you more hungry..lol
Mar 16, 2015 3:53 AM - Mike Kelly: any combusted plant matter is really bad for you
Mar 16, 2015 3:53 AM - Mike Kelly: carcinogenic is one and CO is another
Mar 16, 2015 3:54 AM - Jacob Kirsch: nobody makes a hemp-based filament?
Mar 16, 2015 3:55 AM - Mike Glass: lol hemp
Mar 16, 2015 3:55 AM - Mike Kelly: hemp is the best part of legalizing
Mar 16, 2015 3:55 AM - Mike Kelly: that shit owns
Mar 16, 2015 3:55 AM - Mike Glass: best stuff in the world and grows fast

 

Mar 16, 2015 3:55 AM - Mike Kelly: we need to make methanol from hemp and run our cars off of it
Mar 16, 2015 3:56 AM - Mike Kelly: screw corn and ethanol
Mar 16, 2015 3:56 AM - Mike Glass: They are making houses out of that stuff now.
Mar 16, 2015 3:56 AM - Mike Kelly: you can make like ANYTHING from it, it's insane
Mar 16, 2015 3:56 AM - Mike Kelly: graphene? hemp
Mar 16, 2015 3:56 AM - Mike Kelly: shampoo? hemp
Mar 16, 2015 3:56 AM - Mike Kelly: hemp rope? hemp
Mar 16, 2015 3:56 AM - Mike Kelly: united states constitution? hemp
Mar 16, 2015 3:56 AM - Mike Glass: hemp dope? hemp
Mar 16, 2015 3:57 AM - Mike Kelly: hemps a different plant
Mar 16, 2015 3:57 AM - Mike Glass: not like that dope, dope
Mar 16, 2015 3:57 AM - Mike Kelly: oh
Mar 16, 2015 3:58 AM - Mike Kelly: like pipe dope
Mar 16, 2015 3:58 AM - Mike Kelly: gotta love harry anslinger and DuPont
Mar 16, 2015 3:58 AM - Mike Kelly: nylon sucks ass anyways
Mar 16, 2015 3:59 AM - Mike Glass: hemp still has thc you know
Mar 16, 2015 3:59 AM - Mike Kelly: yeah that's why it's illegal to grow
Mar 16, 2015 4:00 AM - Mike Glass: so stupid, you can get the same effect smoking banana peels, are they illegal..
Mar 16, 2015 4:01 AM - Mike Kelly: yup, it's amazing what you can accomplish with a smear campaign and racism
Mar 16, 2015 4:01 AM - Mike Glass: Thats it Im moving to Denmark
Mar 16, 2015 4:05 AM - Mike Kelly: i need to look at more jobs in germany
Mar 16, 2015 4:11 AM - jbigler1986: Hope you like beer. Plus germans are crazy
Mar 16, 2015 4:22 AM - Mike Kelly: love beer, and i'm also crazy
Mar 16, 2015 4:22 AM - Mike Kelly: at least germans aren't crazy in denying climate change or anti-vaccinations
Mar 16, 2015 4:23 AM - Mike Kelly: prints still chugging along with no issue yet
Mar 16, 2015 4:27 AM - jbigler1986: What r u printing
Mar 16, 2015 4:29 AM - Mike Kelly: http://gfycat.com/EnormousDarkHawaiianmonkseal neat
Mar 16, 2015 4:29 AM - Mike Kelly: i'm printing the catan border pieces
Mar 16, 2015 4:30 AM - Stephen Capistron: don't forget henry ford's hemp car
Mar 16, 2015 4:36 AM - Mike Glass: ah this runs nice with 12 gb of mem now..
Mar 16, 2015 4:37 AM - Soupaboy: The person who wants their dreams to come true must first wake up.
Mar 16, 2015 4:37 AM - Soupaboy: Bam! You are all wiser now
Mar 16, 2015 4:37 AM - Mike Glass: what are you smokin boy
Mar 16, 2015 4:37 AM - Soupaboy: hemp
Mar 16, 2015 4:38 AM - Mike Glass: 1% is pretty strong
Mar 16, 2015 4:40 AM - Soupaboy: 2% is stronger
Mar 16, 2015 4:40 AM - Soupaboy: what are we talking about?
Mar 16, 2015 4:40 AM - Mike Glass: https://twitter.com/RoBo3DPrinter they put the bowl no twit
Mar 16, 2015 4:41 AM - Mike Glass: 1% thc boy
Mar 16, 2015 4:46 AM - Mike Glass: do you dare. http://www.3ders.org/articles/20150...mits-with-this-hard-to-print-test-object.html
Mar 16, 2015 4:47 AM - jbigler1986: With .8 nozzle. Yes
Mar 16, 2015 4:47 AM - jbigler1986: lol. I would probably fail that hard
Mar 16, 2015 4:51 AM - jbigler1986: Who is going to try it?
Mar 16, 2015 4:53 AM - BryZad: my printer is pumping out M45 shotgun parts lol
Mar 16, 2015 4:55 AM - jbigler1986: I wonder how bronze fill would do with a working gun
Mar 16, 2015 4:57 AM - Mike Glass: still plastic
Mar 16, 2015 4:58 AM - Mike Glass: but would be heavier representing it more in weight.
Mar 16, 2015 4:59 AM - BryZad: I been printing big parts in 15 % fill and are soils
Mar 16, 2015 4:59 AM - jbigler1986: True
Mar 16, 2015 5:01 AM - Mike Glass: soils?
Mar 16, 2015 5:01 AM - BryZad: solid
Mar 16, 2015 5:01 AM - BryZad: for the prop parts I need
Mar 16, 2015 5:02 AM - Mike Glass: yep, just depends on your shells and layers. 5 is nice and sturdy
Mar 16, 2015 5:02 AM - BryZad: I will have to post progress pics
Mar 16, 2015 5:03 AM - Mike Glass: yea lets see your props, I love props.
Mar 16, 2015 5:05 AM - Mike Glass: This guy is amazing. http://www.volpinprops.com/
Mar 16, 2015 5:13 AM - BryZad: damn those are nice I wish I had the space and tools to get that high caliber
Mar 16, 2015 5:13 AM - BryZad: mine are more Halo reach and Halo props
Mar 16, 2015 5:15 AM - BryZad: I am working on buckets to make print worthy
Mar 16, 2015 5:15 AM - BryZad: http://rs1353.pbsrc.com/albums/q666/BryZad/IMG_20150315_153456539_zpsbsce4cb1.jpg~320x480
Mar 16, 2015 5:16 AM - Mike Glass: he does halo also
Mar 16, 2015 5:17 AM - BryZad: I only saw the kneedler on that page
Mar 16, 2015 5:19 AM - Mike Kelly: that kinda looks like carters helmet
Mar 16, 2015 5:21 AM - Mike Glass: https://instagram.com/p/zNrZFByBth/
Mar 16, 2015 5:36 AM - BryZad: its a upgraded version but yes you are right mike k
Mar 16, 2015 5:37 AM - BryZad: I like the visor on those instead of the round front
Mar 16, 2015 5:38 AM - Mike Kelly: yeah his didn't have the attachment
Mar 16, 2015 5:38 AM - Mike Kelly: i've always been partial to the ODST helmet
Mar 16, 2015 5:39 AM - BryZad: nope in that model there is the coms unit though
Mar 16, 2015 5:40 AM - BryZad: odst are cool simple to the point helmet
Mar 16, 2015 5:40 AM - Mike Kelly: yup that's what i like about it
Mar 16, 2015 5:40 AM - Mike Kelly: that's how i roll
Mar 16, 2015 5:42 AM - BryZad: if I make a odst bucket I will send you a cast
Mar 16, 2015 5:42 AM - Mike Kelly: http://www.corbisimages.com/stock-p...394524/kenneth-miller-is-dressed-up-as-carter so this'll be you soon
Mar 16, 2015 5:43 AM - BryZad: yea kinda but different helmet and shoulder pieces
Mar 16, 2015 5:43 AM - Mike Kelly: what colors are you thinking
Mar 16, 2015 5:44 AM - BryZad: flat black and a dark metallic blue close to the one in the pic
Mar 16, 2015 5:45 AM - BryZad: you saw the helmet I made didn't you ?
Mar 16, 2015 5:45 AM - Mike Kelly: hmm no i don't believe so
Mar 16, 2015 5:47 AM - BryZad: http://rs1353.pbsrc.com/albums/q666/BryZad/IMG_20140622_155943_487_zps4bb5d800.jpg~320x480
Mar 16, 2015 5:47 AM - BryZad: http://rs1353.pbsrc.com/albums/q666/BryZad/IMG_20140622_160002_158_zps9d936c92.jpg~320x480
Mar 16, 2015 5:48 AM - Mike Kelly: ah yes, nice
Mar 16, 2015 5:48 AM - BryZad: that's a first run low detail
Mar 16, 2015 5:49 AM - BryZad: the one I am trying to clean up is a more up dated version
Mar 16, 2015 5:50 AM - BryZad: that's if I have time to sit down and put in the time to
Mar 16, 2015 5:50 AM - Mike Kelly: i hear that
Mar 16, 2015 5:51 AM - Mike Kelly: i have so many projects going on right now
Mar 16, 2015 5:51 AM - Mike Kelly: need to get my ducks in a row
Mar 16, 2015 5:51 AM - BryZad: and I got a few asking about A high detail Noble 6 bucket too
Mar 16, 2015 5:52 AM - BryZad: yea same here and really no work space to do them
Mar 16, 2015 5:53 AM - BryZad: I am renting and don't have a gurage or anything to work in
Mar 16, 2015 5:55 AM - Mike Kelly: right, i hear that
Mar 16, 2015 6:24 AM - Mike Kelly: always funny when someone uses the word "Unhackable"
Mar 16, 2015 6:30 AM - Mike Kelly: holy crap: http://i.imgur.com/0cJmhoG.gifv
Mar 16, 2015 6:53 AM - TechSupportGo:
Mar 16, 2015 7:03 AM - Mike Glass: that looks like iggy. he does some awesome stuff
Mar 16, 2015 7:04 AM - Stephen Capistron: that is iggy. i'm watching some of his videos now. my mind is blown
Mar 16, 2015 7:05 AM - Mike Glass: cool,
Mar 16, 2015 7:05 AM - Mike Glass: izzy I meant izzy swan
Mar 16, 2015 7:05 AM - Mike Glass: is that who it is?

 

Mar 16, 2015 7:08 AM - Mike Glass: nvm I looked at his u-tube channel. that is cool.
Mar 16, 2015 7:09 AM - TechSupportGo: https://drive.google.com/file/d/0B8FWeUGKaHaxbTQycjkwWWo5WjQ/view?usp=sharing
Mar 16, 2015 7:10 AM - TechSupportGo: I guess I should go ahead and get started swapping the bolt out
Mar 16, 2015 7:12 AM - TechSupportGo: I made that halo helm out of paper a long time ago, I still have the helmet in my garage
Mar 16, 2015 7:15 AM - jbigler1986: http://m.ustream.tv/channel/jbigler1986
Mar 16, 2015 7:16 AM - Mike Glass: taken all day to do that much?
Mar 16, 2015 7:20 AM - jbigler1986: . 8 nozzle
Mar 16, 2015 7:21 AM - jbigler1986: No. It never started. I accidentally unplugged my thermosistor. Woops
Mar 16, 2015 7:21 AM - jbigler1986: Just started it
Mar 16, 2015 7:23 AM - Mike Glass: oh..lol
Mar 16, 2015 7:24 AM - Mike Glass: How fast you going?
Mar 16, 2015 7:26 AM - BryZad: that's how I got started tech was with pep 3d modles
Mar 16, 2015 7:26 AM - Mike Kelly: is that mg's design?
Mar 16, 2015 7:28 AM - BryZad: that helmet I showed you Mike K was a pep helmet to start
Mar 16, 2015 7:32 AM - jbigler1986: I think 45mm
Mar 16, 2015 7:39 AM - Mike Kelly: http://rasterweb.net/raster/2015/03/15/3d-printer-malfunction/
Mar 16, 2015 7:42 AM - BryZad: ha ha mike
Mar 16, 2015 7:43 AM - Mike Kelly: i think minutes might be more appropritate
Mar 16, 2015 7:43 AM - Mike Kelly: get like an arduino that counts and when it fails you hit a button
Mar 16, 2015 8:04 AM - Mike Glass: How about web page stats for all robo's
Mar 16, 2015 8:17 AM - Mike Kelly: 1% uptime
Mar 16, 2015 8:54 AM - jbigler1986: Oh yeah. Got some warping going on. Damn ABS
Mar 16, 2015 9:02 AM - Mike Glass: ouch JB Warp City
Mar 16, 2015 9:12 AM - jbigler1986: I know. How to solve? Bed is at 80. Printing at 230
Mar 16, 2015 9:12 AM - jbigler1986: I thought I printed with brim. That didn't hold
Mar 16, 2015 9:14 AM - jbigler1986: This is my last big print with ABS. Looks like I'm printing the tool holder in blue PLA. Warping kills me on the robo
Mar 16, 2015 9:19 AM - Mike Glass: that was with brim?
Mar 16, 2015 9:20 AM - Mike Glass: I have never had brim fail
Mar 16, 2015 9:20 AM - jbigler1986: I thought I added brim. Let me double check. Lol
Mar 16, 2015 9:23 AM - Mike Glass: wtf is with the time, they should really fix that.
Mar 16, 2015 9:24 AM - jbigler1986: What do you mean
Mar 16, 2015 9:24 AM - jbigler1986: Oh on the chat?
Mar 16, 2015 9:25 AM - jbigler1986: Yeah. With brim. Only 2mm width though. What is recommended
Mar 16, 2015 9:36 AM - Buckwild: trying to setup repetier for my robo, can't find any support for settings on the forum or elsewhere. any ideas?
Mar 16, 2015 9:40 AM - Mike Kelly: Copy settings from matter control
Mar 16, 2015 9:43 AM - jbigler1986: I'm gonna go crazy and do a 8mm brim. Take that ABS
Mar 16, 2015 10:04 AM - Mike Glass: 10 works good
Mar 16, 2015 10:25 AM - Ben R: I have no extra success with brim.. It just makes it fail higher. I tell ya.. every single time I've had ABS fail, it was because I screwed up and had the fan on.
Mar 16, 2015 10:25 AM - Ben R: enclosed, with no fan... zero failures on aquanet. Given that my settings are otherwise good.
Mar 16, 2015 10:27 AM - Buckwild: what happened to the robo 3d preset repetier software version? is that not available at all anymore?
Mar 16, 2015 10:28 AM - jbigler1986: I need to make an enclosure
Mar 16, 2015 10:28 AM - Ben R: T shirt
Mar 16, 2015 10:28 AM - Ben R: garbage bag
Mar 16, 2015 10:28 AM - Ben R: box
Mar 16, 2015 10:28 AM - Mike Kelly: acrylic
Mar 16, 2015 10:28 AM - Ben R: Just be careful.. I had a little enclosure made from PET sheets.. tape came loose, turned into a bellows
Mar 16, 2015 10:29 AM - Ben R: didn't work great
Mar 16, 2015 10:30 AM - jbigler1986: Plexiglass be ok?
Mar 16, 2015 10:30 AM - Ben R: Is it possible to print ABS with no enclosure? My "draped rag" enclosure worked.. but with nothing... I can't imagine
Mar 16, 2015 10:30 AM - Ben R: plexiglass is a brnad
Mar 16, 2015 10:30 AM - Ben R: brand
Mar 16, 2015 10:30 AM - Ben R: yea.. if you want to spend the dough
Mar 16, 2015 10:30 AM - Mike Kelly: plexiglass is acrylic
Mar 16, 2015 10:30 AM - Ben R: my enclosure is MDF and THIN PC because clear acrylic was over 250 bucks for enough to get it donw
Mar 16, 2015 10:30 AM - Ben R: done
Mar 16, 2015 10:31 AM - Ben R: well the way I wanted to
Mar 16, 2015 10:31 AM - Mike Kelly: yeah it's expensive
Mar 16, 2015 10:31 AM - Ben R: and it would have been a pain to cut and glue
Mar 16, 2015 10:31 AM - Ben R: MDF is like Legos for construction
Mar 16, 2015 10:32 AM - Mike Kelly: more like megablocks
Mar 16, 2015 10:32 AM - Ben R: and 8x4 mdf is like.. 10 bucks in 1/4"
Mar 16, 2015 10:32 AM - Ben R: yha
Mar 16, 2015 10:32 AM - jbigler1986: I have no wood working tools. Blah
Mar 16, 2015 10:33 AM - Ben R: Quick slap dash buildup, no fuss, easy to cut... easy to glue.. easy to throw away and start over
Mar 16, 2015 10:33 AM - Ben R: get it cut at the home depot
Mar 16, 2015 10:33 AM - Ben R: or man up and buy a circular saw
Mar 16, 2015 10:33 AM - jbigler1986: Wouldn't use it enough
Mar 16, 2015 10:33 AM - Ben R: k...
Mar 16, 2015 10:34 AM - Ben R: its like 30 bucks... and is used for cutting anything wider than a 2x6.. but you know you
Mar 16, 2015 10:34 AM - Mike Kelly: yeah don't question him
Mar 16, 2015 10:35 AM - Ben R: should have 1 of my e3ds tomorrow.
Mar 16, 2015 10:35 AM - Ben R: chinese one is still in china
Mar 16, 2015 10:36 AM - Ben R: tried the 1.0mm and .8mm nozzles. Eh.. if I spent the time tuning.. maybe.
Mar 16, 2015 10:36 AM - Ben R: but the extruder couldn't keep up. Interestingly enough.. the hotend didn't have a problem holding heat
Mar 16, 2015 10:38 AM - Mike Kelly: how'd you get a 1.0
Mar 16, 2015 10:39 AM - Ben R: yea right? Goes .8 - 1.2 but I have a drill
Mar 16, 2015 10:40 AM - Ben R: messy.. I can't get a good layer down. I mean... individual ribbons go down nicely ,but I can't get them to touch each other properly
Mar 16, 2015 10:40 AM - Ben R: very strong though, like mike glass said. Thick layers make for strong prints
Mar 16, 2015 10:41 AM - Ben R: That's also with ABS. Different materials may react differently. I want to try it on nylon, but I misplaced my nylon printing board. I remember sliding it behind something.. and I can't remember what
Mar 16, 2015 10:44 AM - Mike Glass: I got some nylon today, I guess wood glue works for adhesion?
Mar 16, 2015 10:59 AM - windowsinside: I just got some Nikaflex semi flex any tips from any of you guys? temp? heat bed? ect... anyone?
Mar 16, 2015 11:09 AM - jbigler1986: Haven't tried any flexible material yet
Mar 16, 2015 11:15 AM - TechSupportGo: treat it like pla
Mar 16, 2015 11:15 AM - TechSupportGo: most filament distros will tell you the settings
Mar 16, 2015 11:16 AM - TechSupportGo: for best results
Mar 16, 2015 11:20 AM - jbigler1986: Just printed a vase MG turned out good
Mar 16, 2015 11:20 AM - jbigler1986: Gonna reprint the tool holder in a few.
Mar 16, 2015 11:22 AM - Mike Glass: hey why did you slice it
Mar 16, 2015 11:24 AM - Mike Glass: in the cut-extrude 23 just un-suppress it then you will just get the tool holder.
Mar 16, 2015 11:27 AM - jbigler1986: ?
Mar 16, 2015 11:28 AM - BryZad: hey Mike G have a question for yo u
Mar 16, 2015 11:28 AM - Mike Glass: yeah
Mar 16, 2015 11:29 AM - Mike Glass: jb in Solidworks
Mar 16, 2015 11:29 AM - BryZad: I am going to print chain link in abs what would you say the best temps i sould use?
Mar 16, 2015 11:29 AM - BryZad: its bkl ABS
Mar 16, 2015 11:30 AM - Mike Glass: how many at a time
Mar 16, 2015 11:30 AM - jbigler1986: Oh. I thought you were talking about in repetier. That's why I was like what. Gotcha
Mar 16, 2015 11:31 AM - BryZad: http://www.thingiverse.com/thing:384066
Mar 16, 2015 11:31 AM - BryZad: wouls say like 10 or i can do batches
Mar 16, 2015 11:33 AM - jbigler1986: Try 230. I've had luck with that temp

 

Mar 16, 2015 11:33 AM - Mike Glass: 233 bed 65
Mar 16, 2015 11:38 AM - jbigler1986: Have you had a look at getting the repetier config file?
Mar 16, 2015 11:42 AM - BryZad: no fan right
Mar 16, 2015 11:42 AM - jbigler1986: No fan
Mar 16, 2015 11:55 AM - BryZad: i am rething my choice on cable connectors i have to un hook all the wiring on the ramps to re feed the cabels through :/
Mar 16, 2015 12:08 PM - jbigler1986: Hey MG
Mar 16, 2015 12:10 PM - Mike Glass: yeah
Mar 16, 2015 12:11 PM - jbigler1986: How do I do just the mount part now? Got the tool holder
Mar 16, 2015 12:14 PM - jbigler1986: Nvm. Got it
Mar 16, 2015 12:17 PM - jbigler1986: U r the man
Mar 16, 2015 12:19 PM - Mike Glass: extrude 5..haha
Mar 16, 2015 12:26 PM - jbigler1986: Printing anything? Or designing something?
Mar 16, 2015 12:39 PM - Mike Glass: yep, making these glass cylinders for a light, and made cop lights for a model. I made the lights this weekend but can figure our how I did them, I wrote everyting down not sure why they are not as thick.
Mar 16, 2015 12:43 PM - jbigler1986: Why are all the vases closed top on thingiverse
Mar 16, 2015 12:43 PM - jbigler1986: How do I open them?
Mar 16, 2015 12:45 PM - Mike Glass: print at 100 infill
Mar 16, 2015 12:46 PM - Mike Glass: dont print at 100 infill doh
Mar 16, 2015 12:46 PM - Mike Glass: 0 infill
Mar 16, 2015 12:47 PM - jbigler1986: I want to print it with the tool holder though. Guess I can't
Mar 16, 2015 12:48 PM - Mike Glass: um no
Mar 16, 2015 12:48 PM - Mike Glass: This is so wierd not sure how I did these now..ugggg
Mar 16, 2015 12:48 PM - Mike Glass: maybe it was the speed.
Mar 16, 2015 12:48 PM - jbigler1986: What is it again
Mar 16, 2015 12:51 PM - Mike Glass: just a tube down with spiral
Mar 16, 2015 12:52 PM - jbigler1986: There is an option in slic3r for spiral vase. Nice. Does the settings for you
Mar 16, 2015 12:54 PM - Mike Glass: hmm Im using cura in repetier but maybe I use slic3r
Mar 16, 2015 12:57 PM - jbigler1986: Haven't tried cura in repetier. Only standalone
Mar 16, 2015 12:58 PM - jbigler1986: If you could manually add support where you want it in repetier it would be perfect
Mar 16, 2015 12:59 PM - BryZad: will solid works open IPT files ?
Mar 16, 2015 1:00 PM - Mike Glass: inventor, yes
Mar 16, 2015 1:00 PM - jbigler1986: I know you can add support during design
Mar 16, 2015 1:02 PM - BryZad: guess i need to get solidwork :/
Mar 16, 2015 1:04 PM - jbigler1986: I'm learning it. Not to hard
Mar 16, 2015 1:14 PM - jbigler1986: Holy shit the extruder is going fast
Mar 16, 2015 1:16 PM - jbigler1986: http://m.ustream.tv/channel/jbigler1986
Mar 16, 2015 1:18 PM - jbigler1986: Had to stop the stream. Shitty laptop was screwing with the print. Printing from SD card from now on
Mar 16, 2015 1:20 PM - Mike Glass: isnt that crazy how fast it goes
Mar 16, 2015 1:22 PM - jbigler1986: Yeah it is. I'm even using that white abs that was measured at 1.9mm
Mar 16, 2015 1:22 PM - jbigler1986: No problems at all. Even at that speed
Mar 16, 2015 1:32 PM - Mike Glass: This is really buggin me. can figure out how I did these,
Mar 16, 2015 1:51 PM - Mike Glass: Im turning in, see ya l8tr
Mar 16, 2015 8:41 PM - TechSupportGo: good morning
Mar 16, 2015 8:41 PM - TechSupportGo: I hope everyone has a great day!
Mar 16, 2015 8:58 PM - jbigler1986: Good morning. Thanks. Same to you
Mar 16, 2015 8:59 PM - jbigler1986: http://www.ustream.tv/channel/jbigler1986 Infill looks weird with the .8 nozzle for some reason

 

Mar 17, 2015 at 2:06 AM - Mike Glass: OK, I must be the unluckiest person, I just found another system is failing due to 1 drive failure and 2 drives in predictive failure..ugg I just replaced a drive in this a week ago.
Mar 17, 2015 at 2:10 AM - jbigler1986: Wow. WHat is going on over there
Mar 17, 2015 at 2:14 AM - Mike Glass: I think its sun spots messing with my shit..lol
Mar 17, 2015 at 2:15 AM - jbigler1986: Trying to figure out the puzzle cut
Mar 17, 2015 at 2:15 AM - Mike Glass: just select puzzle cut
Mar 17, 2015 at 2:15 AM - jbigler1986: Don't see that
Mar 17, 2015 at 2:16 AM - Mike Glass: oh. maybe it doesnt exist
Mar 17, 2015 at 2:16 AM - Mike Glass: let me look
Mar 17, 2015 at 2:20 AM - Mike Glass: that was easy
Mar 17, 2015 at 2:21 AM - jbigler1986: ?
Mar 17, 2015 at 2:25 AM - Mike Glass: http://imgur.com/iIQvNDV
Mar 17, 2015 at 2:26 AM - jbigler1986: where did you find that
Mar 17, 2015 at 2:27 AM - Mike Kelly: he drew it
Mar 17, 2015 at 2:27 AM - Mike Glass: then a thin extrude
Mar 17, 2015 at 2:27 AM - Mike Kelly: you should fillet the sharp edge
Mar 17, 2015 at 2:28 AM - jbigler1986: I drew a spline
Mar 17, 2015 at 2:28 AM - Mike Glass: yea, what tolerance should it be for the cut, I have the width at .1 mm
Mar 17, 2015 at 2:29 AM - Mike Kelly: i usually find .5mm is a good tolerance
Mar 17, 2015 at 2:29 AM - jbigler1986: It wouldn't let me extrude it though
Mar 17, 2015 at 2:30 AM - Mike Kelly: i would avoid using splines
Mar 17, 2015 at 2:30 AM - Mike Kelly: you can do that with an arc tool and tangent relations more easily
Mar 17, 2015 at 2:30 AM - jbigler1986: let me try that
Mar 17, 2015 at 2:35 AM - jbigler1986: Reverse direction to close sketch?
Mar 17, 2015 at 2:36 AM - Mike Kelly: or a line
Mar 17, 2015 at 2:36 AM - Mike Glass: I used a 3 point tangent and sketched two lines, that simple
Mar 17, 2015 at 2:37 AM - Mike Glass: extrude cut, thin feature .1mm
Mar 17, 2015 at 2:37 AM - Mike Glass: oh ok .5 it is.. didnt see that
Mar 17, 2015 at 2:38 AM - jbigler1986: Unable to create this extruded feature due to geometric conditions.
Mar 17, 2015 at 2:39 AM - Mike Kelly: screenshot of your sketch
Mar 17, 2015 at 2:43 AM - jbigler1986: Does it matter where I cut it?
Mar 17, 2015 at 2:45 AM - Mike Glass: http://imgur.com/9eZVtQR
Mar 17, 2015 at 2:46 AM - jbigler1986: That's what I'm trying to do
Mar 17, 2015 at 2:46 AM - jbigler1986: Did you have to create a plan
Mar 17, 2015 at 2:46 AM - jbigler1986: plane
Mar 17, 2015 at 2:46 AM - Mike Glass: nope just used the top plane
Mar 17, 2015 at 2:46 AM - jbigler1986: Hmm
Mar 17, 2015 at 2:47 AM - Mike Glass: or you could use plane 3 its way closer
Mar 17, 2015 at 2:47 AM - Mike Glass: you need to adjust it toward the front more.
Mar 17, 2015 at 2:48 AM - Mike Kelly: if you're doing a thin feature you don't need a closed sketch
Mar 17, 2015 at 2:53 AM - jbigler1986: Keep thinking I got it then I get error when i click ok on extrude cut
Mar 17, 2015 at 2:55 AM - jbigler1986: Please check that the sketch extends outside the body limits
Mar 17, 2015 at 2:55 AM - Mike Kelly: you should really just send a screenshot of your sketch instead of wasting time typing that
Mar 17, 2015 at 2:57 AM - jbigler1986: http://imgur.com/uKpZS1M
Mar 17, 2015 at 3:00 AM - Mike Kelly: looks like you need to extend the straight section, also that's one wonky spline
Mar 17, 2015 at 3:02 AM - jbigler1986: Yeah. Its like a puzzle piece. Was more of a test to get it to work
Mar 17, 2015 at 3:06 AM - jbigler1986: Ok. let me start with a straight line
Mar 17, 2015 at 3:09 AM - jbigler1986: The open profile should be created using a face of the solid. Gonna punch it. lol
Mar 17, 2015 at 3:10 AM - Mike Kelly: man what the hell are you doing this is like super easy
Mar 17, 2015 at 3:10 AM - Mike Kelly: start with just a line and do an extruded cut
Mar 17, 2015 at 3:10 AM - Mike Kelly: with thin feature toggled
Mar 17, 2015 at 3:10 AM - jbigler1986: Got it
Mar 17, 2015 at 3:11 AM - jbigler1986: Had to change from bind to though all. Stupid me
Mar 17, 2015 at 3:11 AM - Mike Kelly: ah
Mar 17, 2015 at 3:13 AM - jbigler1986: How do I view the 2nd part of the cut?
Mar 17, 2015 at 3:14 AM - Mike Kelly: uh you should have split it into 2 bodies
Mar 17, 2015 at 3:16 AM - jbigler1986: hmm. After i cut it one stays and the other half hides.
Mar 17, 2015 at 3:17 AM - Mike Kelly: did you do a thin cut
Mar 17, 2015 at 3:17 AM - jbigler1986: Shit no. Let me see where that is
Mar 17, 2015 at 3:18 AM - Mike Kelly: delete the cut feature you made, then when you do the cut feature there's a check box for thin
Mar 17, 2015 at 3:19 AM - jbigler1986: I don't see that checkbox
Mar 17, 2015 at 3:21 AM - Mike Kelly: did you delete the feature or edit it
Mar 17, 2015 at 3:21 AM - jbigler1986: deleted
Mar 17, 2015 at 3:22 AM - jbigler1986: I have the line sketched
Mar 17, 2015 at 3:22 AM - jbigler1986: Then I select extruded cut.
Mar 17, 2015 at 3:23 AM - Mike Kelly: http://i.imgur.com/5ygvpoM.png
Mar 17, 2015 at 3:25 AM - jbigler1986: Yeah I don't have that option
Mar 17, 2015 at 3:27 AM - jbigler1986: http://imgur.com/S18OLyA
Mar 17, 2015 at 3:27 AM - Mike Kelly: that's because you did a 3d sketch
Mar 17, 2015 at 3:27 AM - Mike Kelly: sketch on the top plane
Mar 17, 2015 at 3:33 AM - jbigler1986: Trying to. I select the top plane of the image and add the line sketch and i get the same.
Mar 17, 2015 at 3:33 AM - Mike Kelly: do the tutorials man
Mar 17, 2015 at 3:33 AM - Mike Kelly: this is really basic stuff
Mar 17, 2015 at 3:34 AM - jbigler1986: I have done a few basic things and engraving. Let me start over
Mar 17, 2015 at 3:35 AM - Mike Kelly: just do the tutorials before asking for help with basic concepts
Mar 17, 2015 at 3:36 AM - jbigler1986: Got it
Mar 17, 2015 at 3:36 AM - jbigler1986: Must have had something selected that should not have been
Mar 17, 2015 at 3:56 AM - JeffTheMess: Hey all, using dual fans for the print...how does that affect abs vs pla? I know for abs you can get warping for cooling too fast so why use it?
Mar 17, 2015 at 3:57 AM - jbigler1986: Fans should be off for ABS
Mar 17, 2015 at 3:59 AM - JeffTheMess: only use for pla i assume
Mar 17, 2015 at 4:02 AM - Kevin Nguyen: yes fans for pla only
Mar 17, 2015 at 4:04 AM - Mike Glass: I use fans with abs but thats just works for me.
Mar 17, 2015 at 4:05 AM - Kevin Nguyen: same here
Mar 17, 2015 at 4:05 AM - Mike Glass: Mostly very small parts
Mar 17, 2015 at 4:05 AM - JeffTheMess: would you have the fans on a lower voltage for lower speed?
Mar 17, 2015 at 4:05 AM - Mike Glass: you can adjust the fans with the software.
Mar 17, 2015 at 4:07 AM - JeffTheMess: will it improve with abs I know it has it's problems... I haven't tried abs yet due too lack of experience
Mar 17, 2015 at 4:08 AM - Kevin Nguyen: just dont do it
Mar 17, 2015 at 4:09 AM - Kevin Nguyen: it only works with the 3% of us who get lucky
Mar 17, 2015 at 4:10 AM - JeffTheMess: I'll stick to my pla until I get it down almost perfect
Mar 17, 2015 at 4:11 AM - Mike Glass: ABS is my key for what I do, as I need a material that I an smooth very easily.
Mar 17, 2015 at 4:13 AM - JeffTheMess: you use a second material for support?
Mar 17, 2015 at 4:14 AM - JeffTheMess: I know mike kelly said he does
Mar 17, 2015 at 4:14 AM - Mike Glass: nope, only one hotend for me
Mar 17, 2015 at 4:14 AM - Mike Glass: I have hard enough time with one..lol
Mar 17, 2015 at 4:15 AM - Mike Glass: Chimera one of these days is on my list.
Mar 17, 2015 at 4:16 AM - JeffTheMess: lol yeah
Mar 17, 2015 at 4:25 AM - Bill Monroe: <-- is Chimera'd
Mar 17, 2015 at 4:32 AM - jbigler1986: I hate Walmart
Mar 17, 2015 at 4:32 AM - JeffTheMess: what's that; chimera?
Mar 17, 2015 at 4:32 AM - jbigler1986: Their merchant buyers are morons

 

Mar 17, 2015 at 4:35 AM - Mike Glass: cylops is cool also. http://www.soliforum.com/topic/8507/e3ds-cyclopschimera-dual-extrusion-single-nozzlehotend/
Mar 17, 2015 at 4:37 AM - Mike Glass: or even a Cyclops\
Mar 17, 2015 at 4:38 AM - Mike Glass: Cyclops would work best for my bowls as I could change color without leaving the part..nice
Mar 17, 2015 at 4:41 AM - Bill Monroe: problem with cyclops is the material must be compatible.. same temps, feeds, etc..
Mar 17, 2015 at 4:42 AM - Bill Monroe: it's easier to setup though.. with Chimera getting both of them on exactly the same level can be tedious
Mar 17, 2015 at 4:43 AM - jbigler1986: I like the Chimera
Mar 17, 2015 at 4:44 AM - Mike Glass: you cant mix abs with pla?, or nylon with pett?
Mar 17, 2015 at 4:44 AM - Bill Monroe: sure you can.. might come out like Sheet though
Mar 17, 2015 at 4:46 AM - Mike Glass: can you feed both at the same time though..to mix colors?
Mar 17, 2015 at 4:47 AM - Bill Monroe: in theory I guess.. dunno how good the quality would be and what slicer could handle that
Mar 17, 2015 at 4:47 AM - Mike Glass: that would be interesting
Mar 17, 2015 at 4:47 AM - jbigler1986: MG will program his own slicer for it. Lol
Mar 17, 2015 at 4:48 AM - Bill Monroe: there's folks working with it now..
Mar 17, 2015 at 4:49 AM - Mike Glass: I gots some nylon, gonna dye some and do some glasses.
Mar 17, 2015 at 4:49 AM - Mike Glass: I think you can use food coloring
Mar 17, 2015 at 4:51 AM - jbigler1986: Interesting
Mar 17, 2015 at 4:51 AM - jbigler1986: How much was the nylon
Mar 17, 2015 at 5:01 AM - jbigler1986: Hey MG have you tried meshmixer suport generator?
Mar 17, 2015 at 5:06 AM - Mike Glass: nope was on my list to do..lol
Mar 17, 2015 at 5:06 AM - Mike Glass: the nylon was like $22 for 1lb
Mar 17, 2015 at 5:07 AM - jbigler1986: I'm going to test it as soon as I get home. I will post pics
Mar 17, 2015 at 5:07 AM - Mike Glass: So is that the same ast mesh lab or differnt program
Mar 17, 2015 at 5:08 AM - jbigler1986: Not sure. I haven't looked at mesh lab. I think it's a standalone
Mar 17, 2015 at 5:09 AM - Mike Glass: oh meshmixer is autodesk
Mar 17, 2015 at 5:09 AM - Bill Monroe: I shake my mesh to mix it.. stirring doesnt work well
Mar 17, 2015 at 5:11 AM - jbigler1986: I have the file ready. I let it auto generate then I added a bunch of extra support just to test it
Mar 17, 2015 at 5:11 AM - jbigler1986: It's easy to manually add suport
Mar 17, 2015 at 5:13 AM - Mike Glass: yep just ran through it, looks cool.
Mar 17, 2015 at 5:14 AM - jbigler1986: Agreed. If it works well I might rethink getting S3D.
Mar 17, 2015 at 5:15 AM - Mike Kelly: " can you feed both at the same time though..to mix colors?" according to E3D it doesn't mix the colors but creates like a toothpaste strand of 2 colors
Mar 17, 2015 at 5:16 AM - jbigler1986: Like side by side
Mar 17, 2015 at 5:16 AM - jbigler1986: Interesting
Mar 17, 2015 at 5:17 AM - Mike Glass: lets try it.
Mar 17, 2015 at 5:20 AM - Mike Kelly: good luck with that
Mar 17, 2015 at 5:22 AM - jbigler1986: Lol. Has anyybody seen a quad in action?
Mar 17, 2015 at 5:24 AM - Mike Kelly: a kraken?
Mar 17, 2015 at 5:27 AM - jbigler1986: Yeah
Mar 17, 2015 at 5:29 AM - Mike Glass: This should print without warping http://imgur.com/DZH9P6U
Mar 17, 2015 at 5:32 AM - Mike Kelly: nice
Mar 17, 2015 at 5:32 AM - jbigler1986: Looks good
Mar 17, 2015 at 5:32 AM - Mike Kelly: http://blog.think3dprint3d.com/2014/01/4-extruder-printing-duet-kraken.html
Mar 17, 2015 at 5:34 AM - jbigler1986: That's just crazy.
Mar 17, 2015 at 5:37 AM - jbigler1986: MG Did you have warping issues with the holder?
Mar 17, 2015 at 5:39 AM - Mike Glass: yep, even with xt and 6 hour print..lol
Mar 17, 2015 at 5:40 AM - Mike Glass: Im out of my blue ABS so will reprint it when I get some more. or maybe the nylon I just got.
Mar 17, 2015 at 5:41 AM - jbigler1986: I can print it when I get home. I'm all setup
Mar 17, 2015 at 5:41 AM - jbigler1986: Let you know how it goes before you waste filament
Mar 17, 2015 at 5:43 AM - Mike Kelly: i thought XT wasn't supposed to warp
Mar 17, 2015 at 5:43 AM - Mike Glass: Yeah you and me both
Mar 17, 2015 at 5:45 AM - jbigler1986: Damn XT is expensive too
Mar 17, 2015 at 5:49 AM - Mike Glass: its in the weed eater now.
Mar 17, 2015 at 5:51 AM - Mike Kelly: let's see if this stupid rep2x can print without failing
Mar 17, 2015 at 5:51 AM - Mike Kelly: i have no idea why it suddenly decided not to work on rafts
Mar 17, 2015 at 5:55 AM - jbigler1986: Rafts have always been a pain for me
Mar 17, 2015 at 5:59 AM - Mike Glass: I like rafts except with clear pla, tends not wanting to separate.
Mar 17, 2015 at 5:59 AM - Mike Kelly: it usually works great with HIPS but for some reason simplify3d just doesn't want to print on it
Mar 17, 2015 at 6:00 AM - Mike Kelly: i'm reslicing everything from makerware, hello excessive support
Mar 17, 2015 at 6:42 AM - Mike Kelly: this afternoon is really dragging
Mar 17, 2015 at 6:44 AM - AJinFLA: hey guys just a quick thanks for all you do, wouldve resold my printer without the support of maniacs
Mar 17, 2015 at 6:44 AM - Bob64: http://imgur.com/a/9KWvo
Mar 17, 2015 at 6:44 AM - jbigler1986: Hey MG do you have the no warp tool holder? I'm home now
Mar 17, 2015 at 6:44 AM - Bob64: Found this image on reddit
Mar 17, 2015 at 6:44 AM - Mike Kelly: that's why i switched to PID on my bed
Mar 17, 2015 at 6:44 AM - Mike Kelly: np AJ
Mar 17, 2015 at 6:45 AM - Bob64: Im gonna need to make a note to recalibrate the pid on my bed
Mar 17, 2015 at 6:46 AM - Mike Kelly: set to Bang Bang right now
Mar 17, 2015 at 6:46 AM - Mike Kelly: unless you've enabled PID
Mar 17, 2015 at 6:46 AM - Bob64: nope
Mar 17, 2015 at 6:46 AM - Bob64: oh wait what?
Mar 17, 2015 at 6:46 AM - Bob64: its not set to pid from the get-go?
Mar 17, 2015 at 6:46 AM - Mike Kelly: nope
Mar 17, 2015 at 6:46 AM - Bob64: o.o is that in the latest firmware?
Mar 17, 2015 at 6:47 AM - Mike Kelly: it's in all firmwares
Mar 17, 2015 at 6:47 AM - Mike Kelly: they've always used bang bang
Mar 17, 2015 at 6:47 AM - Bob64: anything special needed to enable PID?
Mar 17, 2015 at 6:48 AM - Mike Kelly: just gotta uncomment it
Mar 17, 2015 at 6:48 AM - Mike Kelly: and define the values
Mar 17, 2015 at 6:48 AM - Bob64: wow... i wonder if this was causing my z ribbing the whole time
Mar 17, 2015 at 6:50 AM - Bob64: wait a sec...
Mar 17, 2015 at 6:50 AM - Bob64: just checked the configuration.h
Mar 17, 2015 at 6:50 AM - Bob64: and
Mar 17, 2015 at 6:50 AM - Bob64: // PID settings: // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP
Mar 17, 2015 at 6:51 AM - Bob64: its not commented. so its using PID?
Mar 17, 2015 at 6:51 AM - Bob64: oh wait. wrong pid setting
Mar 17, 2015 at 6:51 AM - Bob64: //#define PIDTEMPBED
Mar 17, 2015 at 6:51 AM - Mike Kelly:
Mar 17, 2015 at 6:51 AM - Mike Kelly: you had me worried there for a second, but you found it
Mar 17, 2015 at 6:52 AM - Bob64: yeah it was buried a page down so i didn't see it at first
Mar 17, 2015 at 6:53 AM - Bob64: anyway neat. gonna have to do a before/after calibration cube to see if it helps
Mar 17, 2015 at 6:53 AM - Bob64: mebbie i've got an extra-expansive bed of some sort
Mar 17, 2015 at 6:53 AM - Bob64: and thats what was throwing off all my de-ribbing attempts
Mar 17, 2015 at 7:08 AM - Mike Kelly: i still think most peoples ribbing is caused by the motors being off center
Mar 17, 2015 at 7:08 AM - Mike Kelly: and ziggies fixes are for a different issue that not as many peopl have
Mar 17, 2015 at 7:25 AM - Printed Solid: That image is interesting, but a bit confusing.
Mar 17, 2015 at 7:26 AM - Printed Solid: And if it's correct, wouldn't we expect it to be worse with ABS vs PLA?
Mar 17, 2015 at 7:26 AM - Mike Kelly: yes
Mar 17, 2015 at 7:26 AM - Printed Solid: do people with heavy ribbing get none with PLA on a cold plate?
Mar 17, 2015 at 7:27 AM - Mike Kelly: only if it's plate flex
Mar 17, 2015 at 7:27 AM - Mike Kelly: most people these days run their plate at like 60-70C
Mar 17, 2015 at 7:27 AM - Printed Solid: isn't that the claim? it's sure as hell not expansion

 

Mar 17, 2015 at 7:27 AM - Mike Kelly: i had expansion issues on mine, but my heater led to a very large delta T
Mar 17, 2015 at 7:27 AM - Printed Solid: expansion of a few mm of glass over a few degrees is less than nothing
Mar 17, 2015 at 7:28 AM - Mike Kelly: disagree, i did the calculation and for a 10C delta T it's like a >.1mm deviation
Mar 17, 2015 at 7:28 AM - Mike Kelly: enough to see
Mar 17, 2015 at 7:28 AM - Printed Solid: you did it wrong then.
Mar 17, 2015 at 7:28 AM - Mike Kelly: and cause layer compression
Mar 17, 2015 at 7:28 AM - Mike Kelly: lol
Mar 17, 2015 at 7:28 AM - Mike Kelly: ok then you do the math smart guy
Mar 17, 2015 at 7:28 AM - Printed Solid: what's the CTE of borosilicate?
Mar 17, 2015 at 7:29 AM - Mike Kelly: that took me some time to find
Mar 17, 2015 at 7:29 AM - Printed Solid: I actually used to do this professionally to evaluate circuit boards and we used boro glass as the control because it is basically 0 expansion.
Mar 17, 2015 at 7:30 AM - Printed Solid: 3*10^-6
Mar 17, 2015 at 7:30 AM - Printed Solid: so 3mm thickness * 1(ish) degree delta * .000003
Mar 17, 2015 at 7:31 AM - Printed Solid: .000009mm deviation
Mar 17, 2015 at 7:31 AM - Printed Solid: and that's talking temperature measured at the thermistor which would assume that massive chunk of glass has no thermal mass for damping.
Mar 17, 2015 at 7:32 AM - Mike Kelly: the proof is in the results
Mar 17, 2015 at 7:32 AM - Printed Solid: it's interesting though. just baffling.
Mar 17, 2015 at 7:32 AM - Printed Solid: agreed. just what is the correct root cause
Mar 17, 2015 at 7:32 AM - Printed Solid: right root cause and you can get the right fix.
Mar 17, 2015 at 7:33 AM - Mike Kelly: unfortunately i did like 6 things at once to fix my issues, but i had something very similar to what would be perceived as flex causing height deviations
Mar 17, 2015 at 7:33 AM - Mike Kelly: though i don't know for certain what fixed it, a lot of things I guess
Mar 17, 2015 at 7:33 AM - Mike Kelly: you'd see it as more random layer deviations unless you printed a very uniform object shape with identical layer times
Mar 17, 2015 at 7:34 AM - Printed Solid: flex from the circuit board layer and the glass having different coefficients of thermal expansion maybe makes sense, but I find it hard to believe that super thin heater would flex the glass.
Mar 17, 2015 at 7:34 AM - Printed Solid: oh. maybe just temperature differences through the thickness of the glass for heater on / heater off
Mar 17, 2015 at 7:34 AM - Mike Kelly: for me it was the very large temp swing since my heater has 4x the power
Mar 17, 2015 at 7:35 AM - Mike Kelly: but like i said, one of many contributors
Mar 17, 2015 at 7:35 AM - Mike Kelly: i honestly don't know why they run it bang bang anyways
Mar 17, 2015 at 7:35 AM - Mike Kelly: the mosfet can handle PID no problem
Mar 17, 2015 at 7:35 AM - Printed Solid: ya. I get very little ribbing on my robo.
Mar 17, 2015 at 7:35 AM - Mike Kelly: i'm still convinced the major contributor is the centerness of the motors, but i repeat myself
Mar 17, 2015 at 7:35 AM - Printed Solid: LOL, I just realized, I ran two prints one after the other this weekend...
Mar 17, 2015 at 7:36 AM - Printed Solid: same model. same gcode.
Mar 17, 2015 at 7:36 AM - Printed Solid: I think I turned the heater off or down on the second print and had lower ribbing. Now I need to repeat it intentionally.
Mar 17, 2015 at 7:36 AM - Printed Solid: can't remember for sure.
Mar 17, 2015 at 7:37 AM - Printed Solid: I completely agree that it is a fascinating finding.
Mar 17, 2015 at 7:37 AM - Mike Kelly: i can run a quick experiment with two firmwares, one with bang bang and one with PID
Mar 17, 2015 at 7:37 AM - Mike Kelly: now that i have a good baseline
Mar 17, 2015 at 7:38 AM - Printed Solid: would be fascinating to do a survey of printers. compare general print quality vs what control is used.
Mar 17, 2015 at 7:39 AM - Mike Kelly: yeah, since the robo is a very long sheet of glass that's supported on either end, the flex in the middle would cause it to have a varied bow
Mar 17, 2015 at 7:41 AM - Printed Solid: yes. probably worst case. have you given Jerry a heads up?
Mar 17, 2015 at 7:42 AM - Mike Kelly: no
Mar 17, 2015 at 7:42 AM - Mike Kelly: considering there hasn't been a firmware update in months i'm pretty sure they're done on the R1
Mar 17, 2015 at 7:44 AM - Bob64: Ew. Considering all they need to do is change a line and upload the file onto dropbox if they're picky about bandwidth.
Mar 17, 2015 at 7:45 AM - Mike Kelly: they use google drive....
Mar 17, 2015 at 7:45 AM - Mike Kelly: and i think harry's the only one able to change the help page
Mar 17, 2015 at 7:45 AM - Bob64: shrug
Mar 17, 2015 at 7:45 AM - Printed Solid: and it would be helpful for the new printers.
Mar 17, 2015 at 7:45 AM - Mike Kelly: and getting that kid to do work is like pulling teeth
Mar 17, 2015 at 7:45 AM - Mike Kelly: i'm pretty sure the new printers are running arduino's that haven't been flashed since august
Mar 17, 2015 at 7:46 AM - Printed Solid: I'd like to say I can get his attention, but I know that's not true. Need to wait until his next filament order then hold it hostage!
Mar 17, 2015 at 7:46 AM - Mike Kelly: at least judging by the number of printers running 2267.72 z steps to mm
Mar 17, 2015 at 7:46 AM - Mike Kelly: i figure he's just using this as something to put on his applications, then he'll completely lose all interest
Mar 17, 2015 at 7:46 AM - Mike Kelly: got another year of that crap though
Mar 17, 2015 at 7:47 AM - Printed Solid: he does a ton of printing. I think he just has a really odd work ethic.
Mar 17, 2015 at 7:47 AM - Mike Kelly: i call it being self centered
Mar 17, 2015 at 7:50 AM - Bob64: Cant wait for the temps to go up a bit more
Mar 17, 2015 at 7:50 AM - Mike Kelly: what can you do though
Mar 17, 2015 at 7:50 AM - Bob64: Gonna give that new smoothon coating + metal powder a try
Mar 17, 2015 at 7:50 AM - Mike Kelly: i wonder if anyone would buy my robo and i could buy a lulzbot
Mar 17, 2015 at 7:51 AM - jbigler1986: Testing meshmixer support
Mar 17, 2015 at 7:51 AM - Printed Solid: cool bob.
Mar 17, 2015 at 7:51 AM - Bob64: so whats wrong with it these days mike?
Mar 17, 2015 at 7:51 AM - Mike Kelly: metal powder?
Mar 17, 2015 at 7:51 AM - Bob64: yeah
Mar 17, 2015 at 7:51 AM - Mike Kelly: nothings wrong with my printer, it's been great
Mar 17, 2015 at 7:51 AM - Printed Solid: meshmixer support is awesome. probably bump up the defaults so you have thicker struts
Mar 17, 2015 at 7:51 AM - Mike Kelly: just the emblem on it is starting to bug me
Mar 17, 2015 at 7:51 AM - jbigler1986: Hey printed thanks for the nozzle. Got it faster than the e3d lol
Mar 17, 2015 at 7:52 AM - Mike Kelly: what do you mean metal powder
Mar 17, 2015 at 7:52 AM - Printed Solid: damn USPS
Mar 17, 2015 at 7:52 AM - jbigler1986: Yeah. Not your fault
Mar 17, 2015 at 7:52 AM - Bob64: metal powder + resin = metalic finish without the expense of bronzefill
Mar 17, 2015 at 7:52 AM - Mike Kelly: ah
Mar 17, 2015 at 7:52 AM - Printed Solid: I should just start telling people no when they ask for rush. seems like they do way better with the normal services.
Mar 17, 2015 at 7:52 AM - Bob64: its used in coldcasting
Mar 17, 2015 at 7:53 AM - Bob64: looking to see if it can also repair delamination in large ABS prints
Mar 17, 2015 at 7:53 AM - Mike Kelly: gotcha
Mar 17, 2015 at 7:53 AM - jbigler1986: How was the festival? I got stuck with my father in law
Mar 17, 2015 at 7:53 AM - Bob64: because that dremel friction welding technique isn't cutting it
Mar 17, 2015 at 7:54 AM - jbigler1986: That's what the 3d printer pen is for. Lol
Mar 17, 2015 at 7:54 AM - Mike Kelly: bigler that's this weekend
Mar 17, 2015 at 7:54 AM - Bob64: i have a feeling it'd be even worse
Mar 17, 2015 at 7:54 AM - jbigler1986: Oh. I thought it was this past weekend
Mar 17, 2015 at 7:54 AM - Mike Kelly: nope
Mar 17, 2015 at 7:54 AM - Mike Kelly: http://midwestreprapfest.org/wordpress/
Mar 17, 2015 at 7:55 AM - jbigler1986: Oh. Well in that case
Mar 17, 2015 at 7:56 AM - Bob64: i really hate how the new chat keeps changing the members in chat
Mar 17, 2015 at 7:56 AM - Bob64: or re-arranging them
Mar 17, 2015 at 7:56 AM - Mike Kelly: lemme just fix that
Mar 17, 2015 at 7:56 AM - Mike Kelly: oh wait, i'm a fake admin
Mar 17, 2015 at 7:56 AM - Bob64: lolz
Mar 17, 2015 at 7:56 AM - Bob64: im suprised they didn't give u admin access already
Mar 17, 2015 at 7:57 AM - Mike Kelly: robo3d told harry to, harry either refuses or is too lazy to do so
Mar 17, 2015 at 7:58 AM - Mike Kelly: i'm not sure which yet
Mar 17, 2015 at 7:59 AM - Bob64: I'm not sure if im reading behind the lines too much or... is the reality robo3d has no control over their own forums.
Mar 17, 2015 at 7:59 AM - Mike Kelly: that's the case, yes
Mar 17, 2015 at 7:59 AM - Bob64: facepalm.
Mar 17, 2015 at 8:00 AM - Mike Kelly: they're too busy pulling a makerbot and rescinding on their open source claims to bother with their most valuable asset
Mar 17, 2015 at 8:06 AM - Printed Solid: ya. definitely come by.
Mar 17, 2015 at 8:07 AM - Printed Solid: psyched for reprap fest. not so much for the drive.

 

Mar 17, 2015 at 8:08 AM - jbigler1986: Are vendors going to be selling stuff?
Mar 17, 2015 at 8:09 AM - Mike Kelly: How long is the drive for you?
Mar 17, 2015 at 8:13 AM - jbigler1986: Just over 2 hours
Mar 17, 2015 at 8:15 AM - jbigler1986: Wait me or Matt?
Mar 17, 2015 at 8:17 AM - Mike Kelly: matt, though i guess i can figure that out
Mar 17, 2015 at 8:18 AM - Mike Kelly: 10 hours for him
Mar 17, 2015 at 8:19 AM - jbigler1986: Man.
Mar 17, 2015 at 8:20 AM - jbigler1986: I have a 6 hour drive the following weekend. With kids in the car.
Mar 17, 2015 at 8:20 AM - Mike Kelly: oof
Mar 17, 2015 at 8:21 AM - Mike Kelly: i assume matt is bringing his 2 girls
Mar 17, 2015 at 8:21 AM - jbigler1986: Lots of electronics and chargers.
Mar 17, 2015 at 8:24 AM - jbigler1986: Off to watch some March madness.
Mar 17, 2015 at 8:32 AM - Printed Solid: Matt is absolutely defintely positively NOT bringing his 2 girls.
Mar 17, 2015 at 8:32 AM - Printed Solid: I love them dearly, but 10 hrs with them in the car?
Mar 17, 2015 at 8:33 AM - Printed Solid: 10 hrs one way?
Mar 17, 2015 at 8:33 AM - Printed Solid: I see no smiley blowing it's brains out emoticon.
Mar 17, 2015 at 8:34 AM - Printed Solid: and, yes, I will have stuff to sell and lots of samples. if you want something specific, I will bring it for you.
Mar 17, 2015 at 8:51 AM - jbigler1986: Nothing specific
Mar 17, 2015 at 8:52 AM - jbigler1986: Oh and MK my smooth rods are like the picture you posted earlier
Mar 17, 2015 at 8:59 AM - Mike Kelly: Print these then https://db.tt/IdM1XJVE
Mar 17, 2015 at 9:09 AM - jbigler1986: put them on top of the rods then insert the rods into the hole on the case?
Mar 17, 2015 at 9:19 AM - jbigler1986: So I print the meshmixer part with supports. The supports that weren't against the part came off easily. the ones that were against is became part of the stem. Redoing it adding supports that are far away from the stem. Also printing those rod caps. Thanks Mike
Mar 17, 2015 at 10:33 AM - Mike Kelly: correct on the caps
Mar 17, 2015 at 10:37 AM - Mike Glass: only a 24 drive for me, not bad..lol
Mar 17, 2015 at 10:37 AM - Mike Glass: I wish I could go.
Mar 17, 2015 at 10:41 AM - jbigler1986: 24 hours. So that means 16 hours
Mar 17, 2015 at 10:43 AM - Mike Glass: In a diesel also, would be a long trip.
Mar 17, 2015 at 10:43 AM - Mike Kelly: 16 hours for me
Mar 17, 2015 at 10:47 AM - jbigler1986: Damn. Everyone wants to go. It must be a good time
Mar 17, 2015 at 10:48 AM - jbigler1986: http://m.ustream.tv/channel/jbigler1986
Mar 17, 2015 at 10:48 AM - jbigler1986: Check out the support u added
Mar 17, 2015 at 10:48 AM - jbigler1986: I added *
Mar 17, 2015 at 10:48 AM - Mike Glass: its moving
Mar 17, 2015 at 10:50 AM - Mike Kelly: anyone out there wanna tell me if it's possible to ship something to me from my amazon list using the registry address
Mar 17, 2015 at 10:51 AM - Mike Glass: how do you do that
Mar 17, 2015 at 10:53 AM - jbigler1986: Hmmm. Not sure on that on MK
Mar 17, 2015 at 10:53 AM - Mike Kelly: ok fixed it
Mar 17, 2015 at 10:55 AM - Mike Glass: what does this mean. The measured TG of t-glase is 78C.
Mar 17, 2015 at 10:56 AM - Mike Glass: I cant find recommended bed heat for t-glase
Mar 17, 2015 at 10:57 AM - Mike Kelly: well if it means Glass Transition
Mar 17, 2015 at 10:57 AM - Mike Kelly: it does
Mar 17, 2015 at 10:57 AM - Mike Kelly: point where it starts to turn liquid
Mar 17, 2015 at 10:59 AM - jbigler1986: I like the looks of tglase
Mar 17, 2015 at 10:59 AM - Mike Glass: About to run some now, just dont know bed heat yet
Mar 17, 2015 at 10:59 AM - jbigler1986: Does it print hairy?
Mar 17, 2015 at 11:00 AM - Mike Glass: only if you to hot
Mar 17, 2015 at 11:01 AM - jbigler1986: 60
Mar 17, 2015 at 11:01 AM - jbigler1986: https://www.lulzbot.com/products/t-glase-3mm-filament-1lb-reel
Mar 17, 2015 at 11:02 AM - jbigler1986: Specifications tab
Mar 17, 2015 at 11:02 AM - Mike Glass: ok I was dead on..lol
Mar 17, 2015 at 11:03 AM - jbigler1986: What r u testing it on
Mar 17, 2015 at 11:06 AM - Mike Glass: you will see in a few
Mar 17, 2015 at 11:07 AM - Mike Glass: that is, if it isnt a complet failure.
Mar 17, 2015 at 11:09 AM - jbigler1986: Hope not
Mar 17, 2015 at 11:12 AM - Mike Glass: http://vaughnlive.tv/coolreactions
Mar 17, 2015 at 11:14 AM - Mike Glass: not sure if I should be running the fans or not
Mar 17, 2015 at 11:14 AM - Mike Glass: ugg it just failed
Mar 17, 2015 at 11:20 AM - jbigler1986: is that with .8
Mar 17, 2015 at 11:21 AM - Mike Glass: yep
Mar 17, 2015 at 11:22 AM - jbigler1986: shiny
Mar 17, 2015 at 11:23 AM - jbigler1986: http://imgur.com/69Mwga1
Mar 17, 2015 at 11:24 AM - jbigler1986: Remove the orange caps?
Mar 17, 2015 at 11:24 AM - Mike Kelly: wait you have caps already?
Mar 17, 2015 at 11:25 AM - Mike Glass: hahahaha
Mar 17, 2015 at 11:25 AM - jbigler1986: Came with those
Mar 17, 2015 at 11:25 AM - Mike Kelly: >_<
Mar 17, 2015 at 11:25 AM - Mike Kelly: you fail
Mar 17, 2015 at 11:25 AM - Mike Glass: OMG that funny
Mar 17, 2015 at 11:26 AM - jbigler1986: Didn't really look until just now. Woops
Mar 17, 2015 at 11:26 AM - Mike Kelly: you said you looked!
Mar 17, 2015 at 11:26 AM - Mike Kelly: Today at 9:52 AM - jbigler1986: Oh and MK my smooth rods are like the picture you posted earlier
Mar 17, 2015 at 11:26 AM - jbigler1986: didn't notice the caps. I looked at the rods
Mar 17, 2015 at 11:26 AM - Mike Glass: lol
Mar 17, 2015 at 11:27 AM - Mike Kelly: well then i guess your printer doesn't need any mods
Mar 17, 2015 at 11:27 AM - jbigler1986: I just looked to see if there were supports molded
Mar 17, 2015 at 11:28 AM - jbigler1986: ha. I'm sure it does
Mar 17, 2015 at 11:28 AM - Mike Kelly: dual fan is about it
Mar 17, 2015 at 11:28 AM - Mike Kelly: you could print my holder
Mar 17, 2015 at 11:28 AM - jbigler1986: Oh well. Spares
Mar 17, 2015 at 11:29 AM - jbigler1986: Did you make one for e3d?
Mar 17, 2015 at 11:30 AM - jbigler1986: I know you were talking about it. Didn't know if you ended up doing it
Mar 17, 2015 at 11:32 AM - Mike Glass: man this stuff is flexible as hell
Mar 17, 2015 at 11:37 AM - jbigler1986: Anybody printed the Vend yet
Mar 17, 2015 at 11:38 AM - Mike Glass: vend?
Mar 17, 2015 at 11:38 AM - jbigler1986: http://www.thingiverse.com/thing:45347/#files
Mar 17, 2015 at 11:39 AM - jbigler1986: 46 hours for the body with .4 nozzle. 18 hours with .8
Mar 17, 2015 at 11:39 AM - Mike Glass: you give it money, but you have to buy the candy first, does not compute..lol
Mar 17, 2015 at 11:40 AM - jbigler1986: hour 45 power failure. How bad would that suck
Mar 17, 2015 at 11:41 AM - Mike Glass: that means not printing in my twisted mind..lol
Mar 17, 2015 at 11:42 AM - jbigler1986: lol
Mar 17, 2015 at 11:43 AM - Mike Glass: oh im likeing this stuff
Mar 17, 2015 at 11:44 AM - jbigler1986: what r u printing
Mar 17, 2015 at 11:45 AM - Mike Glass: almost done show you in a few
Mar 17, 2015 at 11:46 AM - jbigler1986: dang
Mar 17, 2015 at 11:46 AM - jbigler1986: that's transparent
Mar 17, 2015 at 11:49 AM - jbigler1986: i like that red
Mar 17, 2015 at 11:49 AM - Mike Glass: dang made it to big now..
Mar 17, 2015 at 11:51 AM - Mike Kelly: i think i need to go back to a .4mm nozzle
Mar 17, 2015 at 11:52 AM - jbigler1986: I switched back earlier
Mar 17, 2015 at 11:52 AM - Mike Kelly: nice vaces

 

Mar 17, 2015 at 11:52 AM - Mike Glass: Mike was on a .25 though
Mar 17, 2015 at 11:52 AM - Mike Kelly: ^
Mar 17, 2015 at 11:52 AM - jbigler1986: i like the colors
Mar 17, 2015 at 11:52 AM - Mike Kelly: are you making a siren?
Mar 17, 2015 at 11:53 AM - Mike Glass: yup
Mar 17, 2015 at 11:53 AM - Mike Kelly: don't get in trouble for impersonating a cop
Mar 17, 2015 at 11:53 AM - jbigler1986: lol
Mar 17, 2015 at 11:54 AM - Mike Kelly: costco shopper spotted
Mar 17, 2015 at 11:54 AM - Mike Kelly: i should try my t-glase clear with the .6mm i have
Mar 17, 2015 at 11:54 AM - jbigler1986: best place for tp and paper towels
Mar 17, 2015 at 11:57 AM - jbigler1986: i might order a .6. .8 nozzle is good if detail isn't needed. How is the 6?
Mar 17, 2015 at 11:57 AM - Mike Kelly: it's pretty cool, i need to figure out some more things to print with it
Mar 17, 2015 at 11:57 AM - Mike Kelly: before i go back to cyclop
Mar 17, 2015 at 11:58 AM - Mike Glass: Just by the cheapies that I got and drill them out to whatever size
Mar 17, 2015 at 11:58 AM - Mike Glass: .2,.3,.4,.5 $12 to the door
Mar 17, 2015 at 11:59 AM - jbigler1986: amazon or ebay?
Mar 17, 2015 at 11:59 AM - Mike Glass: amazon prime
Mar 17, 2015 at 11:59 AM - Mike Kelly: i don't think i'd need more than .6
Mar 17, 2015 at 11:59 AM - jbigler1986: what? No 1.2
Mar 17, 2015 at 11:59 AM - Mike Glass: I would be curious if the extruder would keep up with a 1.0
Mar 17, 2015 at 12:00 PM - jbigler1986: .8 it's going fast enough.
Mar 17, 2015 at 12:01 PM - Mike Kelly: lately i've been printing things with a lot of detail so i want slow and low
Mar 17, 2015 at 12:01 PM - jbigler1986: what speed?
Mar 17, 2015 at 12:04 PM - Mike Glass: You just need xt then Mike
Mar 17, 2015 at 12:06 PM - Mike Kelly: yeah i guess so
Mar 17, 2015 at 12:06 PM - Mike Kelly: i've been printing at 30mm/s at 100microns with .25mm nozzle
Mar 17, 2015 at 12:06 PM - Mike Kelly: takes FOREVER
Mar 17, 2015 at 12:09 PM - Mike Glass: I know what you mean im printing at 30 now, and takes all my 5 minutes up, my day is wasted..lol
Mar 17, 2015 at 12:10 PM - Mike Kelly: 9 hours per piece, it's insane
Mar 17, 2015 at 12:11 PM - Mike Kelly: then if it fails, OH BOY
Mar 17, 2015 at 12:15 PM - Fart_Plume: I think the kids learned a few new "choice" words from my failed prints, lol
Mar 17, 2015 at 12:15 PM - Mike Glass: there this one fits perfect.
Mar 17, 2015 at 12:20 PM - Mike Glass: JB the red is Hatchbox t-red pla, its only $16

 

Mar 18, 2015 at 2:05 AM - Mike Kelly: oh look
Mar 18, 2015 at 2:22 AM - AJinFLA: prob w firmware, if i use autolevel firmware i can print but no full graphic lcd, when i introduce marlin I get conflicts between autolevel n marlin, tried just arduino marlin upgrade, lots of lcd but wont move or extrude, bed heated then failed to even register room temp etc. any help appreciated
Mar 18, 2015 at 2:30 AM - Stephen Capistron: the forum works as well as the printer
Mar 18, 2015 at 2:33 AM - Mike Kelly: what do you mean by marlin AJ
Mar 18, 2015 at 2:35 AM - AJinFLA: said i had to update marlin firmware to get lcd going
Mar 18, 2015 at 2:35 AM - AJinFLA: been following ziggy,
Mar 18, 2015 at 2:37 AM - Mike Kelly: oh
Mar 18, 2015 at 2:37 AM - Mike Kelly: i don't know much about that
Mar 18, 2015 at 2:37 AM - AJinFLA: ok ty mike
Mar 18, 2015 at 2:37 AM - Mike Kelly: you can use any stock firmware then add a repository to the arduino software
Mar 18, 2015 at 2:37 AM - Mike Kelly: with the images and whatnot
Mar 18, 2015 at 2:49 AM - Mike Kelly: this day is annoying, can i just go home?
Mar 18, 2015 at 2:50 AM - Mike Glass: yea me too. oh wait, I am home..
Mar 18, 2015 at 2:50 AM - Stephen Capistron: if only you were on EST
Mar 18, 2015 at 3:21 AM - BryZad: I second that Mike K
Mar 18, 2015 at 3:28 AM - jbigler1986: Hello
Mar 18, 2015 at 3:29 AM - jbigler1986: I'm going to punch my laptop when I get home
Mar 18, 2015 at 3:36 AM - Mike Glass: Soon as I get home, first thing I'm gonna do is punch yo mamma in da mouth! Buford T.
Mar 18, 2015 at 3:37 AM - jbigler1986: As soon as I engrave text in sketchup and go to save it, it freezes every freaking time.
Mar 18, 2015 at 3:37 AM - jbigler1986: Guess I will try on my pc when I get home
Mar 18, 2015 at 3:40 AM - Mike Glass: sketchup, blah
Mar 18, 2015 at 3:40 AM - jbigler1986: Yeah. I didn't want to use it but I was adding it to a stl file
Mar 18, 2015 at 4:27 AM - Mike Glass: JB check this out. http://www.sciencealert.com/this-new-device-recycles-plastic-bottles-into-3d-printing-material
Mar 18, 2015 at 4:28 AM - Mike Glass: or anybody..
Mar 18, 2015 at 4:38 AM - jbigler1986: Very interesting
Mar 18, 2015 at 4:40 AM - jbigler1986: " If your kids leave their LEGOs out one too many times for you to tread on with your bare feet... throw them in too."
Mar 18, 2015 at 4:40 AM - jbigler1986: Lol
Mar 18, 2015 at 4:49 AM - Mike Glass: did you know legos are ABS
Mar 18, 2015 at 4:51 AM - jbigler1986: yES i DID
Mar 18, 2015 at 4:52 AM - jbigler1986: I can just picture my kids yelling at me. I would just tell them "Don't worry. I will print you a new lego from this lego"
Mar 18, 2015 at 4:59 AM - Mike Glass: do you live in Delphi?
Mar 18, 2015 at 5:00 AM - jbigler1986: I did a few years ago. ?
Mar 18, 2015 at 5:01 AM - Mike Glass: I tried to add you to skype
Mar 18, 2015 at 5:01 AM - jbigler1986: Lol. I haven't used skype in like a year.
Mar 18, 2015 at 5:02 AM - Mike Glass: oh..lol I dont use it much, but robo support you have to use it.
Mar 18, 2015 at 5:03 AM - jbigler1986: I feel like if it wasn't for you guys on these forums nobody would get hardly any support at all
Mar 18, 2015 at 5:03 AM - Mike Glass: they helped me right away the first time
Mar 18, 2015 at 5:04 AM - jbigler1986: This forum is one of the reasons I got my Robo
Mar 18, 2015 at 5:04 AM - Mike Glass: Mine was the Nerdgasm dude
Mar 18, 2015 at 5:05 AM - jbigler1986: Him to. I like his videos
Mar 18, 2015 at 5:05 AM - jbigler1986: Support is getting crazy http://www.ustream.tv/channel/jbigler1986
Mar 18, 2015 at 5:06 AM - Mike Glass: and on of my old school mates had a like on their facebook..
Mar 18, 2015 at 5:08 AM - jbigler1986: I hope that support that fell onto the stem isn't infused
Mar 18, 2015 at 5:10 AM - Mike Glass: I dont like tubes, they are always wobbly
Mar 18, 2015 at 5:12 AM - Mike Glass: what the H is that?
Mar 18, 2015 at 5:16 AM - jbigler1986: Rose stems and rose flowers
Mar 18, 2015 at 5:17 AM - Mike Kelly: is that the starter pla
Mar 18, 2015 at 5:18 AM - Mike Glass: how can you even see the color.
Mar 18, 2015 at 5:18 AM - jbigler1986: No. It's green. The lights makes it look blue
Mar 18, 2015 at 5:18 AM - jbigler1986: I need to change them. Looks cool but not good practical wise
Mar 18, 2015 at 5:19 AM - Mike Kelly: brief summary of the printer as well
Mar 18, 2015 at 5:21 AM - Stephen Capistron: bazing
Mar 18, 2015 at 5:25 AM - jbigler1986: MK ?
Mar 18, 2015 at 5:25 AM - Mike Kelly: ?
Mar 18, 2015 at 5:26 AM - jbigler1986: brief summary of printer?
Mar 18, 2015 at 5:26 AM - Mike Kelly: "Looks cool but not good "
Mar 18, 2015 at 5:26 AM - Stephen Capistron: yeah, its a joke / slam of the printer. Looks cool, but not good. Bazing
Mar 18, 2015 at 5:26 AM - jbigler1986: Ha
Mar 18, 2015 at 5:27 AM - Stephen Capistron: Knowing what I know now I'd probably be inclined to buy a kit and just build it myself
Mar 18, 2015 at 5:27 AM - jbigler1986: touche
Mar 18, 2015 at 5:28 AM - Mike Kelly: i like the mendel90 as a kit
Mar 18, 2015 at 5:28 AM - jbigler1986: All the tweaking that is needed that is probably the way to go
Mar 18, 2015 at 5:28 AM - Mike Kelly: but the Eustathios or HercuLien is pretty sweet as well
Mar 18, 2015 at 5:31 AM - jbigler1986: How much in parts would you need to buy for the mendel90?
Mar 18, 2015 at 5:31 AM - Mike Glass: so who is makable?
Mar 18, 2015 at 5:33 AM - Stephen Capistron: most expensive parts are probably the aluminum extrusions and
Mar 18, 2015 at 5:33 AM - Stephen Capistron: you could always sacrifice the parts of the robo
Mar 18, 2015 at 5:34 AM - jbigler1986: Might just go with a Makerbot
Mar 18, 2015 at 5:34 AM - jbigler1986: JK.
Mar 18, 2015 at 5:39 AM - jbigler1986: QUick release hotend is cool
Mar 18, 2015 at 5:44 AM - Mike Glass: nice
Mar 18, 2015 at 5:46 AM - Mike Kelly: interesting, looks wobbly
Mar 18, 2015 at 5:47 AM - Mike Glass: They are designed that way, I bet.
Mar 18, 2015 at 5:48 AM - Mike Kelly: i wonder where he got those connectors
Mar 18, 2015 at 5:49 AM - jbigler1986: That would make maintenance so easy
Mar 18, 2015 at 5:49 AM - Mike Kelly: http://community.robo3d.com/index.php?threads/filament-monitor.3335/page-2#post-42914
Mar 18, 2015 at 5:53 AM - jbigler1986: Looks interesting. Super simple
Mar 18, 2015 at 5:54 AM - Mike Kelly: yup
Mar 18, 2015 at 5:59 AM - jbigler1986: http://shop2.frys.com/search?search...tring=microswitch&minprice=&maxprice=&x=0&y=0
Mar 18, 2015 at 5:59 AM - jbigler1986: So many to choose from
Mar 18, 2015 at 6:00 AM - jbigler1986: Wonder if the roller switch would work better
Mar 18, 2015 at 6:01 AM - Mike Kelly: would have less resistance
Mar 18, 2015 at 6:17 AM - jbigler1986: Ziggy like programming?
Mar 18, 2015 at 6:23 AM - jbigler1986: Looks like my next project
Mar 18, 2015 at 6:28 AM - Mike Glass: I dont think it turns of your heat though does it?
Mar 18, 2015 at 6:29 AM - Mike Kelly: i don't think so no
Mar 18, 2015 at 6:30 AM - Mike Glass: that would be usefull for unattend printing
Mar 18, 2015 at 6:33 AM - Mike Kelly: if only i had 1k
Mar 18, 2015 at 6:46 AM - Mike Glass: damn, thats nice.
Mar 18, 2015 at 6:50 AM - Mike Glass: MIght have to sell me old craftsman with the beismeyer fence for that.
Mar 18, 2015 at 8:09 AM - jbigler1986: Put the .8 nozzle back on
Mar 18, 2015 at 8:13 AM - Mike Glass: whatcha gonna build?
Mar 18, 2015 at 8:18 AM - jbigler1986: 3ds game holder for my son. Plus a new fan duct. These ones are to far away from the part
Mar 18, 2015 at 8:20 AM - jbigler1986: Did you send me Rev 20 yet? Lol
Mar 18, 2015 at 8:26 AM - Mike Glass: I have to change the screwdriver hole its kinda tight
Mar 18, 2015 at 8:38 AM - jbigler1986: U don't want it loose
Mar 18, 2015 at 8:43 AM - Mike Glass: on mine I cant pull it out so its tight, I dont use it anyways, didnt drill it out.
Mar 18, 2015 at 8:47 AM - jbigler1986: I can drill it out. Not a big deal. Or I can just edit it
Mar 18, 2015 at 8:50 AM - jbigler1986: http://imgur.com/kmjRan9
Mar 18, 2015 at 8:50 AM - jbigler1986: Adding more layers fix that? Or maybe fans on?

 

Mar 18, 2015 at 9:01 AM - Mike Glass: how many layers and what resolution
Mar 18, 2015 at 9:07 AM - jbigler1986: .4 and 3 layers
Mar 18, 2015 at 9:13 AM - Mike Glass: pla not fan?
Mar 18, 2015 at 9:19 AM - jbigler1986: It's abs
Mar 18, 2015 at 9:45 AM - Ben R: anyone see this in troubleshooting? I have no idea what's wrong with this guy's stuff
Mar 18, 2015 at 9:45 AM - Ben R:
Mar 18, 2015 at 9:51 AM - Mike Glass: belt slipping, or sticky bearings
Mar 18, 2015 at 9:54 AM - Ben R: strange that the top and bottom look to be centered over eachother and the sides a square
Mar 18, 2015 at 9:54 AM - Ben R: that being the case
Mar 18, 2015 at 9:54 AM - Ben R: slippy things seem a lot more sloppy overall
Mar 18, 2015 at 9:54 AM - jbigler1986: Mike. HaveHave yoeyou printedprinted anyrhinganything at 5 or 6 layerlayer height
Mar 18, 2015 at 9:55 AM - Ben R: I did a .6 last night
Mar 18, 2015 at 9:55 AM - Ben R: had trouble.. had to slow down to let the extruder keep up
Mar 18, 2015 at 9:56 AM - Ben R: but my gearing is different from yours
Mar 18, 2015 at 9:56 AM - Mike Glass: Most the stuff is .6
Mar 18, 2015 at 9:56 AM - Ben R: and yea.. amazing strength like you said mike
Mar 18, 2015 at 9:56 AM - Ben R: Don't like the quality.. but I haven't tuned for .8 or 1mm at all
Mar 18, 2015 at 9:57 AM - Ben R: oh yea.. I made a 1mm
Mar 18, 2015 at 9:57 AM - jbigler1986: Doesn't need to be good quality. Just a fan duct. Will try .6. What speed are you running .6 height at?
Mar 18, 2015 at 9:57 AM - Mike Glass: Do .6 with 1.8 shell with spiral, fricken awesome
Mar 18, 2015 at 9:58 AM - Mike Glass: 30 mm at most
Mar 18, 2015 at 9:58 AM - jbigler1986: ok
Mar 18, 2015 at 10:02 AM - Ben R: yea.. I was running 60 at 50% speed.. so.. yea..
Mar 18, 2015 at 10:02 AM - Ben R: beyond that the extruder wouldn't spin enough.. or would skip
Mar 18, 2015 at 10:03 AM - Ben R: I do find it tends to miss when printing angles/curves in the Z direction. doesn't do overhang.. like barely at all. I must have something set up poorly for it. Obviously you did it with that bowl.. well.. that wasn't .6 though
Mar 18, 2015 at 10:10 AM - jbigler1986: Think I'm going to order a .6 or a bunch of cheap ones and drill them out
Mar 18, 2015 at 10:12 AM - Mike Glass: Yea everything ive done is at .6 except my tool holder
Mar 18, 2015 at 10:12 AM - jbigler1986: .6 seems like it would be a good medium ground
Mar 18, 2015 at 10:14 AM - Mike Glass: Are you talking layer height or nozzles
Mar 18, 2015 at 10:16 AM - jbigler1986: http://www.ustream.tv/channel/jbigler1986
Mar 18, 2015 at 10:16 AM - jbigler1986: Nozzles
Mar 18, 2015 at 10:18 AM - Ben R: so you can d .4 layers... prolly decent.. ,2-.4 are good usable heights
Mar 18, 2015 at 10:20 AM - jbigler1986: I'm doing .5 right now. It's cruising
Mar 18, 2015 at 10:21 AM - AJinFLA: firmware questions guys. uploaded smooth rod, auto bed firmware from here, no lcd function, sent to add U8glib_arduino v1.17, then told upgrade marlin, marlin and autolevel zip seem to be fighting each other w different set ups, went w just arduino and marlin upgrade alone and got lcd but steppers fighting eachother, bed heater failed, then no controls, can someone give me order of items i need to install to get back running? happy to start
Mar 18, 2015 at 10:22 AM - jbigler1986: First install latest firmware and make sure everything works without messing with lcd
Mar 18, 2015 at 10:22 AM - Bill Monroe: AJ you have 8mm Zthreads?
Mar 18, 2015 at 10:24 AM - AJinFLA: yes sir
Mar 18, 2015 at 10:25 AM - Bill Monroe: ok, you only need ONE file.
Mar 18, 2015 at 10:25 AM - AJinFLA: all 3 of these firmwares, auto level u8glib and marlin, set as stock they wont work together, seems some redundant or conflicting settings
Mar 18, 2015 at 10:25 AM - AJinFLA: lol sweet, lol
Mar 18, 2015 at 10:26 AM - Bill Monroe: problem is, since they changed the website, I dont know where it is
Mar 18, 2015 at 10:26 AM - AJinFLA: so ill start new arduino install and then add which?
Mar 18, 2015 at 10:26 AM - AJinFLA: sorry i been thru forums hundred times before coming to you guys
Mar 18, 2015 at 10:26 AM - jbigler1986: http://help.robo3dprinter.com/Wiki/RoBo_3D_Firmware
Mar 18, 2015 at 10:26 AM - jbigler1986: https://drive.google.com/file/d/0B10g8oo2ZwvrSFVMQ2FydU5ZNGM/view?usp=sharing
Mar 18, 2015 at 10:26 AM - Ben R: yea.. easier to find than ever
Mar 18, 2015 at 10:27 AM - Ben R: they finally made useful links on the front page
Mar 18, 2015 at 10:27 AM - jbigler1986: First link tells you how to install it. 2nd link is the download for the firmware you need
Mar 18, 2015 at 10:27 AM - AJinFLA: ok this was my 1st install alone, gave me no lcd or heat bed higher settings, thats why sent to other sections
Mar 18, 2015 at 10:27 AM - Bill Monroe: ya.. jb got it. go there.dl the 8mm - with autolevel if you have that too, and follow the instructions
Mar 18, 2015 at 10:28 AM - Bill Monroe: the LCD will work when you plug it in, there's no extra files or anthing needed
Mar 18, 2015 at 10:28 AM - jbigler1986: Depends on which lcd
Mar 18, 2015 at 10:28 AM - Bill Monroe: sounds like someone with enough knowledge to be dangerous was giving you advice
Mar 18, 2015 at 10:28 AM - AJinFLA: ok this was easy 1st install i did already, didnt give me lcd or bed heat increase
Mar 18, 2015 at 10:29 AM - Bill Monroe: which lcd do you have?
Mar 18, 2015 at 10:29 AM - AJinFLA: full graphic smart
Mar 18, 2015 at 10:29 AM - jbigler1986: XXL is plug and play. Full graphics you need to make edits
Mar 18, 2015 at 10:29 AM - Ben R: full graphic is a bit different
Mar 18, 2015 at 10:29 AM - Bill Monroe: gads..
Mar 18, 2015 at 10:29 AM - Ben R: all the others are the same hardware
Mar 18, 2015 at 10:29 AM - AJinFLA: got sent to reprap video who told me update marlin
Mar 18, 2015 at 10:29 AM - Bill Monroe: full graphic isnt worth the trouble
Mar 18, 2015 at 10:29 AM - Ben R: yup.. they have a good faq on what to do
Mar 18, 2015 at 10:30 AM - AJinFLA: xxl is different
Mar 18, 2015 at 10:30 AM - jbigler1986: it's very easy
Mar 18, 2015 at 10:30 AM - Ben R: but icons
Mar 18, 2015 at 10:30 AM - Ben R: its worth it for the ICONS
Mar 18, 2015 at 10:30 AM - AJinFLA: except sent me to upgrade marlin, which disagrees w smooth rod update
Mar 18, 2015 at 10:30 AM - jbigler1986: I will edit the firmware for you for your lcd. Give me a minute
Mar 18, 2015 at 10:30 AM - Bill Monroe: ah.. i thought you wanted to make plastic parts.. but hey.. if playing with icons is your thing.. dont forget to take your Ritalin
Mar 18, 2015 at 10:30 AM - AJinFLA: no full graphic has icons, xxl is just text
Mar 18, 2015 at 10:31 AM - AJinFLA: so do or dont mess w marlin or U8glib?
Mar 18, 2015 at 10:32 AM - Bill Monroe: all you're goin to do is compile and upload a file that's a modified marlin OS already twaked for RObo
Mar 18, 2015 at 10:32 AM - jbigler1986: Do add the U8glib to your libraries
Mar 18, 2015 at 10:33 AM - Ben R: yea.. If its not touch screen.. I wouldn't bother.. but .. if you're buying from one of the print parts shops.. they're the same price.
Mar 18, 2015 at 10:33 AM - AJinFLA: ok been at that stage several times but gave me no lcd or again ability to go over 85 on bed heat
Mar 18, 2015 at 10:33 AM - Ben R: I can see people wanting the blingin one
Mar 18, 2015 at 10:33 AM - AJinFLA: thus sent for marlin newest firmware also? just 8mm rod upgrade and u8glib didnt get me their
Mar 18, 2015 at 10:34 AM - jbigler1986: I got my full graphics on amazon for $24.
Mar 18, 2015 at 10:34 AM - jbigler1986: Do you have skype?
Mar 18, 2015 at 10:34 AM - AJinFLA: i can get it set up in a few, much appreciated JB
Mar 18, 2015 at 10:34 AM - jbigler1986: np
Mar 18, 2015 at 10:36 AM - AJinFLA: ill get the arduino reset to stock add 8mm for robo add ubglib and get back in few then
Mar 18, 2015 at 10:36 AM - jbigler1986: Don't worry about uploading it now. It will install over it when we upload the edited one
Mar 18, 2015 at 10:40 AM - jbigler1986: Hey MG you can add me on skype now. Lol
Mar 18, 2015 at 10:44 AM - Mike Glass: you should of seen a request
Mar 18, 2015 at 10:44 AM - jbigler1986: what username was it
Mar 18, 2015 at 10:44 AM - Mike Glass: Justin
Mar 18, 2015 at 10:45 AM - Mike Glass: or justin Bigler
Mar 18, 2015 at 10:45 AM - jbigler1986: didn't see a request
Mar 18, 2015 at 10:45 AM - Mike Glass: maybe thats not you..lol
Mar 18, 2015 at 10:46 AM - Mike Glass: justin.bigler
Mar 18, 2015 at 10:46 AM - jbigler1986: what is yours?
Mar 18, 2015 at 10:46 AM - Mike Glass: I found your 1986
Mar 18, 2015 at 10:47 AM - jbigler1986: look for chino7564
Mar 18, 2015 at 10:47 AM - Mike Glass: oh..lol what the hell
Mar 18, 2015 at 10:47 AM - jbigler1986: i created that forever ago. Don't remember my other passwords
Mar 18, 2015 at 11:10 AM - jbigler1986: Look at this support. Lol. http://imgur.com/9IDOHp6
Mar 18, 2015 at 11:31 AM - Mike Kelly: looks like a diseas
Mar 18, 2015 at 11:36 AM - Mike Kelly: ok how do i rotate a 385meg stl

 

Mar 18, 2015 at 11:44 AM - jbigler1986: holy crap. what is it
Mar 18, 2015 at 11:48 AM - Mike Kelly: the printer
Mar 18, 2015 at 11:49 AM - Mike Kelly: lots of threads
Mar 18, 2015 at 12:11 PM - Mike Glass: shoot me know
Mar 18, 2015 at 12:39 PM - jbigler1986: ?
Mar 18, 2015 at 12:44 PM - Mike Glass: what up
Mar 18, 2015 at 12:48 PM - jbigler1986: not much
Mar 18, 2015 at 12:48 PM - jbigler1986: what happened to aj?
Mar 18, 2015 at 12:52 PM - Mike Glass: what does he concider a few..lol
Mar 18, 2015 at 12:52 PM - jbigler1986: lol
Mar 18, 2015 at 12:52 PM - Mike Glass: consider, god I cant type
Mar 18, 2015 at 12:52 PM - jbigler1986: few hours maybe
Mar 18, 2015 at 12:54 PM - Mike Glass: Think im gonna go watch house of cards and call er the night.
Mar 18, 2015 at 12:55 PM - Mike Glass: I didnt even print anything today, and I was home..cleaned my office so now I can concentrate on projects..lol
Mar 18, 2015 at 12:57 PM - jbigler1986: I'm gonna start this print and call it a night too
Mar 18, 2015 at 12:58 PM - jbigler1986: See ya. Take it easy

 

Mar 18, 2015 at 9:45 PM - jbigler1986: Good morning
Mar 18, 2015 at 10:13 PM - JeffTheMess: good morning all, was it just me or was the forum down yesterday?
Mar 18, 2015 at 10:15 PM - jbigler1986: It was down for like half of the day
Mar 18, 2015 at 10:16 PM - JeffTheMess: Did you get a chance to try the meshmixer?
Mar 18, 2015 at 10:17 PM - jbigler1986: I did actually.
Mar 18, 2015 at 10:17 PM - JeffTheMess: how was it? did it work well? or was it wasteful
Mar 18, 2015 at 10:18 PM - jbigler1986: It works pretty well. Just make sure you make the tip really small or else it's hard to remove it all. Also make sure you add supports to a support if it's going to be a tall one
Mar 18, 2015 at 10:19 PM - JeffTheMess: great hopefully I get to try it soon
Mar 18, 2015 at 10:19 PM - JeffTheMess: what did you print with it?
Mar 18, 2015 at 10:20 PM - jbigler1986: Yeah I made a few tall supports and they fell over on the part and got infused. So I redid it and added support to the tall supports and it worked good
Mar 18, 2015 at 10:21 PM - JeffTheMess: Awsome
Mar 18, 2015 at 10:21 PM - jbigler1986: http://imgur.com/9IDOHp6
Mar 18, 2015 at 10:22 PM - jbigler1986: That was a part I added a bunch to last night for the hell of it. They all broke off really easily
Mar 18, 2015 at 10:23 PM - JeffTheMess: that's good though....it beats picking at the regular type of support, possibly damaging your print
Mar 18, 2015 at 10:24 PM - jbigler1986: The blue light are really starting to annoy me
Mar 18, 2015 at 10:25 PM - JeffTheMess: i know right
Mar 18, 2015 at 10:25 PM - JeffTheMess: I like these lights
Mar 18, 2015 at 10:25 PM - JeffTheMess: http://thingiverse-production-new.s.../f1/17/bd/12/dc/DSCN2633_preview_featured.JPG
Mar 18, 2015 at 10:26 PM - jbigler1986: I think I'm going to add a strip to each side. Probably externally powered ones because I don't feel like wiring them to the robo
Mar 18, 2015 at 10:29 PM - JeffTheMess: yeah the lights were originally nice but now it kind of useless
Mar 18, 2015 at 10:29 PM - jbigler1986: Agreed. Looks cool. Not practical though
Mar 18, 2015 at 10:30 PM - JeffTheMess: You got anything to print today?
Mar 18, 2015 at 10:31 PM - jbigler1986: http://www.ustream.tv/channel/jbigler1986
Mar 18, 2015 at 10:32 PM - jbigler1986: Ahhh. It's messed up
Mar 18, 2015 at 10:33 PM - jbigler1986: I need to run the part through netfabb. It has some issues.
Mar 18, 2015 at 10:33 PM - JeffTheMess: what is it?
Mar 18, 2015 at 10:34 PM - jbigler1986: http://www.thingiverse.com/thing:583502
Mar 18, 2015 at 10:35 PM - jbigler1986: Y axis is way off now. Lol. It messed up in the exact same spot overnight. Gotta be a part issue. Dang it
Mar 18, 2015 at 10:35 PM - JeffTheMess: nice I wish people on that site would have it fixed already
Mar 18, 2015 at 10:36 PM - jbigler1986: Yeah. Oh well
Mar 18, 2015 at 10:36 PM - jbigler1986: I just need to get in the habbit of running every part through netfabb
Mar 18, 2015 at 10:36 PM - JeffTheMess: whats wrong with your Y axis?
Mar 18, 2015 at 10:38 PM - jbigler1986: The part has some issue around that layer where it seems to drop the height or something then it catches the part and moves the Y axis way off. Happened last night as well to the same part on the same spot
Mar 18, 2015 at 10:41 PM - JeffTheMess: stop your print I cant take it anymore
Mar 18, 2015 at 10:42 PM - jbigler1986: Not sure exactly what causes the issue in the part to do that. Never get the issue after I run a part through netfabb. If I don't, it randomly happens to some parts.
Mar 18, 2015 at 10:42 PM - jbigler1986: I can't. Don't have it hooked up to PC. Forgot to before I left. Woops
Mar 18, 2015 at 10:43 PM - JeffTheMess: that sucks
Mar 18, 2015 at 10:43 PM - jbigler1986: Oh well. Just a little spaghetti to clean up
Mar 18, 2015 at 10:44 PM - JeffTheMess: Im way to cheap for that lol If it screw up I stop it right away lol
Mar 18, 2015 at 10:45 PM - jbigler1986: I have tons of filament. Plus I buy cheap stuff anyways. $24 for 1kg
Mar 18, 2015 at 10:46 PM - JeffTheMess: now bad
Mar 18, 2015 at 10:48 PM - JeffTheMess: not bad
Mar 18, 2015 at 10:49 PM - jbigler1986: At least the lid finished fine. Lol
Mar 18, 2015 at 10:49 PM - JeffTheMess: glass half full thinking
Mar 18, 2015 at 10:53 PM - jbigler1986: If it didn't happen at the exact same spot I would be worried. But seeing as it happened at the same spot it's gotta be a part issue. If I repair and reprint then it does it again then I will see other solutions
Mar 18, 2015 at 10:55 PM - JeffTheMess: yeah thats right
Mar 18, 2015 at 11:27 PM - Bill Monroe: Hidey Ho
Mar 18, 2015 at 11:27 PM - jbigler1986: Hello
Mar 18, 2015 at 11:30 PM - Mike Kelly: morning
Mar 18, 2015 at 11:31 PM - jbigler1986: morning
Mar 18, 2015 at 11:33 PM - Bill Monroe: I took out white PET, put in red PLA. now my print is pink PLEAT
Mar 18, 2015 at 11:37 PM - Mike Glass: Morning Robolutionaries
Mar 18, 2015 at 11:38 PM - jbigler1986: Now it's a party
Mar 18, 2015 at 11:40 PM - Mike Glass: woot, woot
Mar 18, 2015 at 11:44 PM - jbigler1986: Do you want some spaghetti?
Mar 18, 2015 at 11:57 PM - Mike Glass: yea I saw that, kinda sucky
Mar 18, 2015 at 11:58 PM - jbigler1986: Oh well. Lesson learned. Always run the stl through netfabb
Mar 18, 2015 at 11:59 PM - Mike Glass: http://3dprint.com/1079/robo3d-r2-printer-on-the-way-this-summer/
Mar 19, 2015 at 12:00 AM - Mike Kelly: ew 3dprint.com
Mar 19, 2015 at 12:00 AM - Mike Glass: only 2 years behind..haha
Mar 19, 2015 at 12:03 AM - jbigler1986: Hmm. Dual extruder. I'm guessing price will be around $1200. Have they announce price point?
Mar 19, 2015 at 12:03 AM - Mike Kelly: i think 1300 was the last number i heard
Mar 19, 2015 at 12:04 AM - jbigler1986: Thats hefty
Mar 19, 2015 at 12:04 AM - Mike Kelly: i'll believe it when i see it though, from my outside perspective they'rew not that close
Mar 19, 2015 at 12:04 AM - Mike Kelly: that articles also a year old
Mar 19, 2015 at 12:05 AM - jbigler1986: Well the 5-6 months was way off
Mar 19, 2015 at 12:07 AM - Mike Kelly: i'd say they're more than 5-6 months right now
Mar 19, 2015 at 12:07 AM - Mike Glass: I know, just that it was interesting what the pipe dream was.
Mar 19, 2015 at 12:07 AM - jbigler1986: How many R1's have they sold
Mar 19, 2015 at 12:08 AM - Mike Glass: 3 and we are all here..lol
Mar 19, 2015 at 12:08 AM - Mike Kelly: hahaha
Mar 19, 2015 at 12:09 AM - Mike Kelly: according to my math somewhere less than 6k
Mar 19, 2015 at 12:09 AM - Mike Kelly: might be off by a few thousand though
Mar 19, 2015 at 12:10 AM - Mike Glass: Moreno said that they are currently working on a dual extruder upgrade for the “R1″ model.
Mar 19, 2015 at 12:11 AM - jbigler1986: Ha. YOu would think by now at least that would be out
Mar 19, 2015 at 12:11 AM - Mike Glass: Robo, is I doubt it, more like the community.
Mar 19, 2015 at 12:12 AM - Mike Kelly: na they're not doing a dual R1
Mar 19, 2015 at 12:12 AM - Mike Kelly: they can't figure it out
Mar 19, 2015 at 12:13 AM - jbigler1986: Not sure if I would really use dual anyways
Mar 19, 2015 at 12:15 AM - jbigler1986: I paused and changed filament once. I thought I would use it but I don't.
Mar 19, 2015 at 12:16 AM - Mike Glass: These are kinda fun. http://www.iboxprinters.com/
Mar 19, 2015 at 12:17 AM - Mike Glass: something for the desk at work.
Mar 19, 2015 at 12:17 AM - jbigler1986: Cool. Never seen that
Mar 19, 2015 at 12:18 AM - Mike Glass: http://www.tiko3d.com/ this may be interesting also.
Mar 19, 2015 at 12:20 AM - Mike Kelly: those ibox don't use a laser
Mar 19, 2015 at 12:21 AM - jbigler1986: Tiko is interesting
Mar 19, 2015 at 12:21 AM - Mike Glass: led. crazy, but only 328 resolution
Mar 19, 2015 at 12:21 AM - Mike Glass: You like peachy then it uses laser..lol
Mar 19, 2015 at 12:21 AM - Mike Kelly: yeah really kinda defeats the purpose of SLA
Mar 19, 2015 at 12:21 AM - Mike Kelly: i don't like pulling an object into liquid
Mar 19, 2015 at 12:22 AM - Mike Kelly: and the demo prints they show are really bad
Mar 19, 2015 at 12:22 AM - Mike Glass: i think they use led instead of a projector, that thing is small
Mar 19, 2015 at 12:23 AM - Mike Glass: I think more for a novelty item then actual usefull.
Mar 19, 2015 at 12:23 AM - Mike Kelly: i'd like a small SLA for miniatures, but it just isn't feasible
Mar 19, 2015 at 12:24 AM - Mike Kelly: lasers are too expensive
Mar 19, 2015 at 12:24 AM - Mike Glass: Then your sheep would turn out instead of blobs..lol
Mar 19, 2015 at 12:24 AM - Mike Kelly: actually they turned out ok
Mar 19, 2015 at 12:25 AM - Mike Kelly: i mean they're still blobs
Mar 19, 2015 at 12:25 AM - Mike Kelly: but you can kinda tell there's the humping ones
Mar 19, 2015 at 12:25 AM - Mike Glass: you need a .1 nozzle

 

Mar 19, 2015 at 12:25 AM - Mike Kelly: lol
Mar 19, 2015 at 12:25 AM - jbigler1986: That would take forever
Mar 19, 2015 at 12:26 AM - Mike Kelly: 18 hours later....
Mar 19, 2015 at 12:26 AM - jbigler1986: I keep wasting damn fan ducts
Mar 19, 2015 at 12:27 AM - jbigler1986: They either sit to low or way to high like pointing at the heatsink
Mar 19, 2015 at 12:27 AM - Mike Glass: Will mikes new one work for you.
Mar 19, 2015 at 12:28 AM - jbigler1986: It might. Does he have one for e3d?
Mar 19, 2015 at 12:28 AM - Mike Kelly: nope
Mar 19, 2015 at 12:28 AM - Mike Glass: Is that just for the hex?
Mar 19, 2015 at 12:28 AM - jbigler1986: The ones I printed last night were the closest. Just a few mm to low
Mar 19, 2015 at 12:29 AM - Mike Glass: so yours sits lower than your hex?
Mar 19, 2015 at 12:29 AM - jbigler1986: yeah
Mar 19, 2015 at 12:30 AM - Mike Kelly: hey mike will you download my robo3d model and tell me if it works
Mar 19, 2015 at 12:31 AM - Mike Kelly: http://www.thingiverse.com/thing:729956
Mar 19, 2015 at 12:31 AM - Mike Kelly: i guess justin you can too
Mar 19, 2015 at 12:31 AM - Mike Glass: you mean for printing?
Mar 19, 2015 at 12:32 AM - jbigler1986: Enough files? Lol
Mar 19, 2015 at 12:32 AM - Mike Kelly: no i mean if you can load it up in solidworks
Mar 19, 2015 at 12:33 AM - Mike Kelly: yeah whoever designed that ramps board used a TON of parts
Mar 19, 2015 at 12:34 AM - Mike Glass: holy crap
Mar 19, 2015 at 12:34 AM - jbigler1986: Is the Robo3d.step the full model?
Mar 19, 2015 at 12:35 AM - Mike Kelly: if you download everything to a single folder you should be able to open the Robo3d.sldasm file
Mar 19, 2015 at 12:35 AM - jbigler1986: ok.
Mar 19, 2015 at 12:35 AM - Mike Kelly: but yes the step will extract all the files minus color information
Mar 19, 2015 at 12:36 AM - Stephen Capistron: MK you'd like full spectrum laser
Mar 19, 2015 at 12:37 AM - Mike Kelly: yes i would
Mar 19, 2015 at 12:39 AM - JeffTheMess: thats sounds good
Mar 19, 2015 at 12:39 AM - Stephen Capistron: you know you wouldn't have so many files if you used creo
Mar 19, 2015 at 12:39 AM - Mike Kelly: hmm, pass
Mar 19, 2015 at 12:40 AM - Mike Kelly: i would have had so many files if i deleted the ramps/arduino
Mar 19, 2015 at 12:40 AM - Mike Glass: ok it looks for the path for all the files, so you have to manually browse for them.
Mar 19, 2015 at 12:41 AM - Mike Kelly: hmm wtf, it should all reference from one folder
Mar 19, 2015 at 12:42 AM - jbigler1986: In netfabb should I do default repair or simple?
Mar 19, 2015 at 12:44 AM - Mike Kelly: i always do default
Mar 19, 2015 at 12:44 AM - Stephen Capistron: some file names have an underscore between words and SW is tripping up
Mar 19, 2015 at 12:44 AM - Mike Kelly: oh gotcha, i forgot thingiverse changes that
Mar 19, 2015 at 12:44 AM - Mike Kelly: i'll change it to a zipped folder
Mar 19, 2015 at 12:51 AM - Mike Glass: looking for z:\users\mike\documents\solidworks\Robo3D\Stock Printer\Complete Stock Printer
Mar 19, 2015 at 12:54 AM - Stephen Capistron: rectificado 8mm?
Mar 19, 2015 at 12:54 AM - Mike Kelly: That's weird.
Mar 19, 2015 at 12:55 AM - Mike Glass: that and the damn underscore additions
Mar 19, 2015 at 12:55 AM - Mike Kelly: Stupid thingiverse won't let me share a large zip folder.
Mar 19, 2015 at 12:55 AM - Mike Kelly: Ok thanks. I'll work on that
Mar 19, 2015 at 12:57 AM - jbigler1986: Bring on March Madness
Mar 19, 2015 at 1:00 AM - Mike Kelly: when's tip off
Mar 19, 2015 at 1:02 AM - jbigler1986: first game is at 12:15 EST
Mar 19, 2015 at 1:02 AM - Mike Kelly: what sites are streaming
Mar 19, 2015 at 1:03 AM - Stephen Capistron: cbs did last year
Mar 19, 2015 at 1:03 AM - jbigler1986: Not sure. Haven't looked it up. My team is at 7:15 on CBS so didn't need to check
Mar 19, 2015 at 1:04 AM - Mike Kelly: good background filler
Mar 19, 2015 at 1:04 AM - Stephen Capistron: i only couldn't locate one file and it did pop up with a host of errors but it looks okay
Mar 19, 2015 at 1:06 AM - jbigler1986: http://www.ncaa.com/march-madness-live
Mar 19, 2015 at 1:14 AM - Mike Kelly: keeps getting stuck at 88% loaded
Mar 19, 2015 at 1:15 AM - jbigler1986: the site? If so it loaded for me
Mar 19, 2015 at 1:16 AM - jbigler1986: http://www.ncaa.com/march-madness-live/game/206
Mar 19, 2015 at 1:16 AM - jbigler1986: That's Notre Dame vs Northeastern
Mar 19, 2015 at 1:17 AM - Stephen Capistron: wait, Northeastern made the tournament? WTF
Mar 19, 2015 at 1:17 AM - jbigler1986: Probably won their conference tournament
Mar 19, 2015 at 1:21 AM - jbigler1986: Let's see how long it takes before my bracket is destroyed
Mar 19, 2015 at 1:21 AM - jbigler1986: I say within the first 7 games
Mar 19, 2015 at 1:21 AM - Mike Kelly: i hope duke goes out 1st round again
Mar 19, 2015 at 1:21 AM - Mike Kelly: i love when that happens
Mar 19, 2015 at 1:22 AM - jbigler1986: I hate Duke but my bracket would take a huge hit
Mar 19, 2015 at 1:24 AM - jbigler1986: If my team wins tonight and Kentucky wins. We gotta play them. Horrible draw
Mar 19, 2015 at 1:25 AM - Mike Glass: This is cool
Mar 19, 2015 at 1:33 AM - Mike Kelly: ok i just put up a .zip file, can someone download and verify integrity
Mar 19, 2015 at 1:34 AM - Mike Kelly: i'm guessing you went to cinci
Mar 19, 2015 at 1:36 AM - Mike Kelly: that's a cool clock bot
Mar 19, 2015 at 1:36 AM - jbigler1986: Purdue
Mar 19, 2015 at 1:36 AM - Mike Kelly: ah
Mar 19, 2015 at 1:36 AM - Mike Kelly: i guess i shoulda guessed
Mar 19, 2015 at 1:37 AM - jbigler1986: You did guess
Mar 19, 2015 at 1:37 AM - jbigler1986: lol
Mar 19, 2015 at 1:37 AM - Mike Kelly: <- didn't know where purdue was
Mar 19, 2015 at 1:37 AM - jbigler1986: Most people don't
Mar 19, 2015 at 1:38 AM - Mike Kelly: this feed sucks
Mar 19, 2015 at 1:38 AM - Mike Kelly: or my internet
Mar 19, 2015 at 1:38 AM - Mike Kelly: probably my internet
Mar 19, 2015 at 1:38 AM - jbigler1986: Quality looks great to me
Mar 19, 2015 at 1:38 AM - jbigler1986: Don't have the volume on so not sur e how it is
Mar 19, 2015 at 1:39 AM - Mike Kelly: mine keeps buffering but we have like awful internet here
Mar 19, 2015 at 1:41 AM - Mike Kelly: northeastern is doing better than i expected
Mar 19, 2015 at 1:43 AM - jbigler1986: they have missed some easy shots too
Mar 19, 2015 at 1:46 AM - Stephen Capistron: that file was a lot better
Mar 19, 2015 at 1:46 AM - Stephen Capistron: only the hexagon pneumatic didn't populate on its own which is fine
Mar 19, 2015 at 1:48 AM - jbigler1986: Northeastern is looking goos
Mar 19, 2015 at 1:48 AM - jbigler1986: good
Mar 19, 2015 at 1:51 AM - Mike Glass: I opened the I got a socket set screw oval point_am<1> that shows up huge on the side of the hex.
Mar 19, 2015 at 1:53 AM - Mike Glass: http://imgur.com/LGMtpRq
Mar 19, 2015 at 1:54 AM - Mike Glass: all my screws are bigger..lol
Mar 19, 2015 at 1:55 AM - jbigler1986:
Mar 19, 2015 at 1:55 AM - Mike Glass: nuts are gigantic
Mar 19, 2015 at 2:05 AM - Mike Kelly: ok this feed is worthless
Mar 19, 2015 at 2:13 AM - Mike Glass: any Ideas why mike
Mar 19, 2015 at 2:22 AM - Mike Kelly: i've had that happen sometimes, i think you just need to reload
Mar 19, 2015 at 2:22 AM - Mike Kelly: i just put up a new version with the hex pneumatic fitting, not important but yeah
Mar 19, 2015 at 2:35 AM - AJinFLA: messed up firmware bad, can anyone get me back to original so I can add and learn from there again?
Mar 19, 2015 at 2:35 AM - Mike Kelly: help.robo3dprinter.com/Wiki/RoBo_3D_Firmware
Mar 19, 2015 at 2:36 AM - AJinFLA: only gets you firmware doesnt help, conflicts with marlin update,
Mar 19, 2015 at 2:37 AM - AJinFLA: tried manual push reset button on arduino blinked green but firmware same

 

Mar 19, 2015 at 2:38 AM - Stephen Capistron: you don't want to install the marlin one AFAIK
Mar 19, 2015 at 2:38 AM - Stephen Capistron: you want to install the robo modded version
Mar 19, 2015 at 2:38 AM - AJinFLA: yeah i was running good with 8mm robo n U8glib then lcd didnt work forum said update marlin, then all hell broke loose
Mar 19, 2015 at 2:39 AM - AJinFLA: cant go back in and just reflash this as it conflicts with some other errors i caused with ignorance
Mar 19, 2015 at 2:39 AM - Mike Kelly: O_O
Mar 19, 2015 at 2:39 AM - Mike Kelly: what
Mar 19, 2015 at 2:40 AM - Mike Kelly: just flash that firmware man
Mar 19, 2015 at 2:40 AM - Mike Glass: doh
Mar 19, 2015 at 2:40 AM - Stephen Capistron: these cheap electronics like to hold onto bad information sometimes
Mar 19, 2015 at 2:40 AM - AJinFLA: I add it to library, sketchbook wont open anymore,
Mar 19, 2015 at 2:40 AM - Stephen Capistron: could try leaving it off for a while
Mar 19, 2015 at 2:40 AM - Mike Kelly: what do you mean add to library
Mar 19, 2015 at 2:40 AM - Stephen Capistron: try downloading a fresh copy?
Mar 19, 2015 at 2:41 AM - AJinFLA: when i go to add library and open that, trying just to reflash robo it says this and that undifed etc, bout 100 lines of errors, thats why i want start from scratch
Mar 19, 2015 at 2:42 AM - AJinFLA: sketch add files import library buttons
Mar 19, 2015 at 2:42 AM - Mike Kelly: you should return the graphics and buy an XXL, no need to mess with what you're trying to do
Mar 19, 2015 at 2:43 AM - AJinFLA: except not an option, noone gonna take back opened electronic that work but I dont have knowledge
Mar 19, 2015 at 2:43 AM - Mike Kelly: they would
Mar 19, 2015 at 2:43 AM - Mike Kelly: if you didn't damage it
Mar 19, 2015 at 2:44 AM - AJinFLA: not the lcd's fault, just undefine when right firmware up
Mar 19, 2015 at 2:44 AM - Mike Kelly: so return it and make your life easier
Mar 19, 2015 at 2:44 AM - Mike Kelly: then just flash the firmware on the page i linked to get things fixed
Mar 19, 2015 at 2:44 AM - AJinFLA: by time u ship it back etc i will have paid for 2, not the point, can u help me get back to square one
Mar 19, 2015 at 2:45 AM - AJinFLA: when i verify and compile to upload ton of conflict errors
Mar 19, 2015 at 2:45 AM - Mike Kelly: delete everything arduino related
Mar 19, 2015 at 2:45 AM - Mike Kelly: reinstall
Mar 19, 2015 at 2:45 AM - AJinFLA: need to go back to b4 uploaded robo link firmware
Mar 19, 2015 at 2:45 AM - Mike Kelly: flash the firmware above
Mar 19, 2015 at 2:45 AM - Mike Kelly: when you get that working, come back to us
Mar 19, 2015 at 2:45 AM - Mike Kelly: google "Complete arduino uninstall" if you can't get that uninstalled
Mar 19, 2015 at 2:46 AM - AJinFLA: did it, erased librarys removed marlin, 8mm auto bed, and the u8glib, reinstalled arduino etc
Mar 19, 2015 at 2:46 AM - Mike Kelly: so is your printer working right now
Mar 19, 2015 at 2:46 AM - AJinFLA: Im here because I cant get to a more remedial level
Mar 19, 2015 at 2:46 AM - AJinFLA: no wont move
Mar 19, 2015 at 2:46 AM - Mike Kelly: then you need to try again
Mar 19, 2015 at 2:47 AM - Mike Kelly: preferably using a new computer
Mar 19, 2015 at 2:47 AM - AJinFLA: wont even connect to cura now, checked port all good
Mar 19, 2015 at 2:47 AM - Mike Kelly: because i have no idea what kind of stuff you've done to mess it up
Mar 19, 2015 at 2:48 AM - AJinFLA: which brings me full circle again to how to i start from scratch
Mar 19, 2015 at 2:48 AM - Mike Kelly: complete uninstall arduino
Mar 19, 2015 at 2:48 AM - Mike Kelly: flash the firmware from the link
Mar 19, 2015 at 2:49 AM - AJinFLA: so your reply is google it?
Mar 19, 2015 at 2:49 AM - Mike Kelly: yes
Mar 19, 2015 at 2:49 AM - Mike Kelly: i don't know off hand how to and i don't feel like looking into it for you
Mar 19, 2015 at 2:49 AM - AJinFLA: bro, said 5 x's it wont let me upload it, says conflicts
Mar 19, 2015 at 2:49 AM - AJinFLA: wish you just said that from the start then thanks anyway
Mar 19, 2015 at 2:49 AM - Mike Kelly: try again once you get a fresh install setup, or use a new computer
Mar 19, 2015 at 2:50 AM - AJinFLA: what would another computer accomplish?
Mar 19, 2015 at 2:50 AM - Mike Kelly: you wouldn't have whatever broke your current version of arduino
Mar 19, 2015 at 2:50 AM - AJinFLA: and I said I'm looking for way to install new, never mind mike, your hearts clearly not in this today
Mar 19, 2015 at 2:52 AM - AJinFLA: ty stephen for at least trying to help, have good one
Mar 19, 2015 at 2:54 AM - Mike Kelly: try this: http://www.glarysoft.com/absolute-uninstaller/
Mar 19, 2015 at 2:56 AM - Stephen Capistron: AJ, you have to remember that the only assistance that robo provides in the forum is that they pay for the hosting
Mar 19, 2015 at 2:56 AM - Stephen Capistron: all of the information is supplied by fellow customers at no cost to anyone
Mar 19, 2015 at 2:57 AM - Stephen Capistron: I understand Mike's frustration with answering the same questions over and over again. Linking to the same parts on thingiverse. Posting the same pictures ...
Mar 19, 2015 at 2:57 AM - Stephen Capistron: So when a real problem like you seem to have comes along the amount of patience is low
Mar 19, 2015 at 2:58 AM - JeffTheMess: I Co-Sign that Stephen
Mar 19, 2015 at 2:58 AM - Mike Kelly: i'm also not keen on trying to troubleshoot problems i'm not familiar with, especially when they've been exacerbated
Mar 19, 2015 at 2:58 AM - Stephen Capistron: and i have a work meeting to go to now, so best of luck
Mar 19, 2015 at 3:01 AM - jbigler1986: AJ if you will be on tonight I will flash the firmware for you
Mar 19, 2015 at 3:02 AM - jbigler1986: I was setup for it last night but you disappeared. Lol
Mar 19, 2015 at 3:06 AM - Mike Glass: Jb has the same setup right?
Mar 19, 2015 at 3:07 AM - Mike Glass: ya snooze ya lose
Mar 19, 2015 at 3:10 AM - jbigler1986: Yes.
Mar 19, 2015 at 3:11 AM - jbigler1986: Same printer and same graphics controller. I will fix his max temp issue too since I will be making edits anyways
Mar 19, 2015 at 3:11 AM - Mike Glass: so you can print at 320 now?
Mar 19, 2015 at 3:12 AM - jbigler1986: At the low side. I usually go up to 400. Ya know. I like to watch the hotend smoke as it's extruding
Mar 19, 2015 at 3:13 AM - Mike Glass: you can grind up car tires now and print with that!
Mar 19, 2015 at 3:13 AM - jbigler1986: ???
Mar 19, 2015 at 3:13 AM - Mike Glass: just effin with ya..
Mar 19, 2015 at 3:14 AM - jbigler1986: Well with the recycler I thought you were being serious.
Mar 19, 2015 at 3:14 AM - Mike Glass: maybe one day.
Mar 19, 2015 at 3:15 AM - jbigler1986: Oh snap. Notre Dame is only up by 2 with 30 seconds left
Mar 19, 2015 at 3:16 AM - Mike Kelly: thanks for the heads up
Mar 19, 2015 at 3:18 AM - Mike Glass: yeah I thought fooball season was over.. silly me
Mar 19, 2015 at 3:19 AM - Mike Kelly: whoa
Mar 19, 2015 at 3:19 AM - Mike Kelly: bahahaha, steal with 2 seconds left, way to lose the game northeastern
Mar 19, 2015 at 3:19 AM - jbigler1986: They had a chance. Should have drove the lane
Mar 19, 2015 at 3:20 AM - Mike Kelly: seriously
Mar 19, 2015 at 3:20 AM - Mike Kelly: they got greedy, shoulda taken the tie
Mar 19, 2015 at 3:21 AM - jbigler1986: Yep. Trying to get open for the 3. Dummies
Mar 19, 2015 at 3:21 AM - Mike Kelly: yup, game over
Mar 19, 2015 at 3:21 AM - Mike Kelly: AIRBALL
Mar 19, 2015 at 3:22 AM - jbigler1986: Well. And that's why March Madness is fun though
Mar 19, 2015 at 3:22 AM - Mike Kelly: yup, interesting games
Mar 19, 2015 at 3:23 AM - jbigler1986: Iowa State better win now
Mar 19, 2015 at 3:23 AM - Mike Kelly: i hope so i have them going far
Mar 19, 2015 at 3:23 AM - jbigler1986: It's a close game
Mar 19, 2015 at 3:24 AM - jbigler1986: Losing actually
Mar 19, 2015 at 3:24 AM - Mike Kelly: i'm gonna take lunch and watch
Mar 19, 2015 at 3:25 AM - jbigler1986: Fixed my issue i posted this morning
Mar 19, 2015 at 3:28 AM - jbigler1986: Wanna get dizzy watch this http://www.ustream.tv/channel/jbigler1986
Mar 19, 2015 at 3:32 AM - Mike Glass: did you run it through netfabb
Mar 19, 2015 at 3:33 AM - jbigler1986: Yep among a few other things
Mar 19, 2015 at 3:34 AM - Mike Glass: I gotta find some new lights for mine.
Mar 19, 2015 at 3:36 AM - Mike Kelly: snap uab drains a 3
Mar 19, 2015 at 3:36 AM - JeffTheMess: what was the fix?
Mar 19, 2015 at 3:36 AM - jbigler1986: Me too. Gonna just get some external powered led strips
Mar 19, 2015 at 3:36 AM - JeffTheMess: ran it thru netfabb
Mar 19, 2015 at 3:37 AM - jbigler1986: I upped my temp to 194 from 188, lowered first layer height and ran it through netfabb

 

Mar 19, 2015 at 3:37 AM - jbigler1986: MK Iowa State is losing with 50 seconds left.
Mar 19, 2015 at 3:38 AM - Mike Kelly: alright they just got the final shot
Mar 19, 2015 at 3:38 AM - Mike Kelly: guess not
Mar 19, 2015 at 3:40 AM - Mike Kelly: omg what was that
Mar 19, 2015 at 3:40 AM - jbigler1986: Crazy games already
Mar 19, 2015 at 3:40 AM - Mike Kelly: ugh stupid iwowa
Mar 19, 2015 at 3:41 AM - Mike Kelly: game over
Mar 19, 2015 at 3:43 AM - jbigler1986: Well first upset took a total of 2 games
Mar 19, 2015 at 4:04 AM - Mike Kelly: and baylor is screwing the pooch wow
Mar 19, 2015 at 4:04 AM - Mike Kelly: big 12 is not gonna make it to 32 at this rate
Mar 19, 2015 at 4:10 AM - jbigler1986: Baylor better win
Mar 19, 2015 at 4:11 AM - Mike Kelly: seriously
Mar 19, 2015 at 4:14 AM - Mike Kelly: Baylor and BU are bother 2 syllables, why are they chanting BU...
Mar 19, 2015 at 4:15 AM - JamesLogan: does anyone know if there is a cheaper way to control the Robo via wi-fi from a tablet? If I already have an android tablet and an ipad and don't want another? Is it possible to just buy the transmitter for the Robo somewhere?
Mar 19, 2015 at 4:19 AM - jbigler1986: Repetier has an app I think
Mar 19, 2015 at 4:22 AM - Stephen Capistron: octopi print server?
Mar 19, 2015 at 4:23 AM - Stephen Capistron:
Mar 19, 2015 at 4:23 AM - JamesLogan: Cool. Thanks. I'll check it - what about the version of matter control Robo is using on their tablets?
Mar 19, 2015 at 4:24 AM - JamesLogan: and the transmitter? to plug into the printer? Any ideas?
Mar 19, 2015 at 4:24 AM - jbigler1986: He wants it on his tablet though
Mar 19, 2015 at 4:25 AM - jbigler1986: I'm thinking about mounting my surface pro to my robo. I never use it anyways
Mar 19, 2015 at 4:25 AM - JamesLogan: I've got an old laptop that lives with mine
Mar 19, 2015 at 4:27 AM - JamesLogan: do the new robos have blue LED's?
Mar 19, 2015 at 4:27 AM - jbigler1986: Yes
Mar 19, 2015 at 4:27 AM - JamesLogan: any idea where on the Arduino they are powered from?
Mar 19, 2015 at 4:28 AM - jbigler1986: Nope. Haven't followed the wires yet
Mar 19, 2015 at 4:28 AM - JamesLogan: I've been sitting on some LED's I'm dying to connect to that board
Mar 19, 2015 at 4:31 AM - jbigler1986: I'm sure you can google it and find a place to connect them. I just haven't looked into it
Mar 19, 2015 at 4:32 AM - jbigler1986: Ok. WTF. Printer is printing way off on y axis again
Mar 19, 2015 at 4:32 AM - jbigler1986: http://www.ustream.tv/channel/jbigler1986
Mar 19, 2015 at 4:33 AM - jbigler1986: 3rd time now in the same spot. What could be causing that?
Mar 19, 2015 at 4:41 AM - Mike Glass: what slicer you using?
Mar 19, 2015 at 4:41 AM - jbigler1986: Slic3r
Mar 19, 2015 at 4:41 AM - Stephen Capistron: have you tried printing anything that is as tall or taller?
Mar 19, 2015 at 4:42 AM - jbigler1986: Yeah. I have printed some tall rose stems and they were fine
Mar 19, 2015 at 4:42 AM - Mike Glass: did you look at the model within slic3r? Ive noticed on some models it does wierd stuff.
Mar 19, 2015 at 4:43 AM - jbigler1986: It looked fine after slicing it. Even after doing single layer view and scrolling through the layers
Mar 19, 2015 at 4:45 AM - JamesLogan: the tech support guy at Robo has never heard of the LEDs
Mar 19, 2015 at 4:46 AM - Mike Kelly: Which led?
Mar 19, 2015 at 4:47 AM - jbigler1986: I have had this issue before when printing a fan duct. Restarted the print and it was fine though. Hmm
Mar 19, 2015 at 4:47 AM - JamesLogan: if you look at the images of the R1 on the Robo website, there is a string of blue LEDs right under the bed...
Mar 19, 2015 at 4:47 AM - JamesLogan: http://www.robo3d.com/collections/3d-printers
Mar 19, 2015 at 4:48 AM - jbigler1986: That's not how they come
Mar 19, 2015 at 4:48 AM - JamesLogan: and I've read people mentioning the blue light making it harder to see certain filaments
Mar 19, 2015 at 4:48 AM - JamesLogan: and jb just answered yes to my question if the new robo's have blue LEDs
Mar 19, 2015 at 4:49 AM - jbigler1986: They do have blue leds. They aren't located where they are in that picture though
Mar 19, 2015 at 4:49 AM - JamesLogan: I could be hallucinating again, but all of that adds up to a blue LED modification on the latest batch of Robos
Mar 19, 2015 at 4:49 AM - JamesLogan: at least that's what I was thinking -
Mar 19, 2015 at 4:51 AM - JamesLogan: Mike Kelly? do you know?
Mar 19, 2015 at 4:54 AM - Mike Kelly: omg baylor what the hell
Mar 19, 2015 at 4:55 AM - jbigler1986: WTF. They were up by 10 last time I checked
Mar 19, 2015 at 4:55 AM - JamesLogan: can anyone tell me what the array of blue things is on the Robo in this photo?
Mar 19, 2015 at 4:56 AM - JamesLogan: http://www.robo3d.com/collections/3d-printers
Mar 19, 2015 at 4:56 AM - jbigler1986: Do you think my issue is slicer related
Mar 19, 2015 at 4:56 AM - Mike Kelly: they're LED"s james, one second lemme read over this
Mar 19, 2015 at 4:56 AM - JamesLogan: thanks Mike - one less piece of evidence that I am crazy
Mar 19, 2015 at 4:57 AM - Mike Kelly: justin, yes it's probably because slic3r sucks
Mar 19, 2015 at 4:58 AM - Mike Kelly: james, i don't think the LED"s are still mounted at that spot, but they do have blue LED's somewhere
Mar 19, 2015 at 4:58 AM - Mike Kelly: mike or jb would need to take a picture of their location
Mar 19, 2015 at 4:58 AM - Mike Kelly: they've had LED's since like june or so
Mar 19, 2015 at 4:58 AM - jbigler1986: https://www.google.com/search?q=rob...Fwww.thingiverse.com%2Fthing%3A516826;628;472
Mar 19, 2015 at 4:59 AM - jbigler1986: That's where they are on each side. He has them covered up
Mar 19, 2015 at 4:59 AM - JamesLogan: mine is an endlessly modified kickstarter - which is finally KICKING ASS!! - thanks Mike
Mar 19, 2015 at 5:00 AM - Mike Kelly: sure
Mar 19, 2015 at 5:00 AM - Mike Kelly: i just bought some white led's for mine
Mar 19, 2015 at 5:00 AM - Mike Kelly: connected them to 12v
Mar 19, 2015 at 5:00 AM - jbigler1986: I will try with cura engine
Mar 19, 2015 at 5:00 AM - JamesLogan: I can thankfully say that thanks to the latest MatterControl (and the Tech support guys) it prints flawlessly everytime
Mar 19, 2015 at 5:00 AM - JamesLogan: pretty much
Mar 19, 2015 at 5:01 AM - JamesLogan: did you have to modify the 12v?
Mar 19, 2015 at 5:01 AM - Mike Kelly: well no you don't need to
Mar 19, 2015 at 5:01 AM - Mike Kelly: i added a block connector onto mine to make it easier to add things for 12v
Mar 19, 2015 at 5:03 AM - Mike Kelly: you can just wire them in here: http://i.imgur.com/zx6cYNb.jpg
Mar 19, 2015 at 5:03 AM - jbigler1986: interesting
Mar 19, 2015 at 5:04 AM - JamesLogan: right along side the bed connectors? as in with the bed power connectors?
Mar 19, 2015 at 5:05 AM - Mike Kelly: that's the input powe
Mar 19, 2015 at 5:05 AM - Mike Kelly: power*
Mar 19, 2015 at 5:05 AM - Mike Kelly: they go back to the power supply
Mar 19, 2015 at 5:05 AM - Mike Kelly: you can run things in parallel off it, just be sure not to short anything as it's unfused
Mar 19, 2015 at 5:05 AM - Mike Kelly: which you could also add a 30A fuse onto it for protection
Mar 19, 2015 at 5:06 AM - jbigler1986: Leds don't draw that much power. If you add other stuff or a ton of leds I wouldn't worry
Mar 19, 2015 at 5:07 AM - Mike Kelly: yeah the fuse is just there to prevent a short from damaging the PSU, not really important if you're careful
Mar 19, 2015 at 5:07 AM - JamesLogan: the 'highlighted' slot in the image, the one indicated by the red and black dots, is where I currently have my hot bed power connected (I think) - can I just slip the + and - wires for the LEDs right in with them? and if I were to add a fuse, it would just be between the LED and the connector?
Mar 19, 2015 at 5:08 AM - Mike Kelly: correct on both
Mar 19, 2015 at 5:08 AM - JamesLogan: Mike, you have given me great happiness
Mar 19, 2015 at 5:08 AM - JamesLogan: thanks
Mar 19, 2015 at 5:08 AM - Mike Kelly: i do what i can
Mar 19, 2015 at 5:08 AM - Mike Kelly: because i must
Mar 19, 2015 at 5:09 AM - JamesLogan: or they will beat you again, I understand
Mar 19, 2015 at 5:09 AM - Mike Kelly: haha
Mar 19, 2015 at 5:09 AM - jbigler1986: You are admin remember.
Mar 19, 2015 at 5:09 AM - Mike Kelly: *fake admin
Mar 19, 2015 at 5:10 AM - JamesLogan: now if someone would just explain that to Boris, he might let you go outside and see the sky once in a while
Mar 19, 2015 at 5:10 AM - Mike Kelly: who was the robo3d person that told you there weren't LED's
Mar 19, 2015 at 5:10 AM - JamesLogan: Mike, do you know anything about making the printer wi-fi?
Mar 19, 2015 at 5:11 AM - Mike Kelly: i think octoprint can do that
Mar 19, 2015 at 5:11 AM - Mike Kelly: there's also the smoothieboard, i think that has wifi
Mar 19, 2015 at 5:13 AM - JamesLogan: whoever answered the phone over at the 24 hour tech support - at one point he thought I was on hold and I heard him going off telling the other guy that I was frustrating him. and as nice as I was, it was clear he had no idea what I was asking him - he thought the LEDs in that photo were some knd of reflection
Mar 19, 2015 at 5:14 AM - JamesLogan: I honestly couldn't have been more polite and he was totally cool too, just had no idea about the LEDs
Mar 19, 2015 at 5:14 AM - JamesLogan: at least not the ones I was asking about

 

Mar 19, 2015 at 5:15 AM - JamesLogan: but he was totally cool and pro, just not on the same page
Mar 19, 2015 at 5:16 AM - Mike Kelly: i see
Mar 19, 2015 at 5:16 AM - Mike Kelly: too bad you didn't remember the name
Mar 19, 2015 at 5:18 AM - JamesLogan: finally escalated it up to the next guy, a level 2 tech or something - I remember his name I just feel like it's throwing him under the bus, and like I said, he was on point getting an stl resent to me, which was what I called about in the first place
Mar 19, 2015 at 5:18 AM - Mike Kelly: i'm just curious if it was brian
Mar 19, 2015 at 5:19 AM - JamesLogan: See? Am I now throwing the whole lot of them under the bus by not saying who he was?
Mar 19, 2015 at 5:19 AM - Mike Kelly: eh i don't know what's going on with them these days
Mar 19, 2015 at 5:20 AM - JamesLogan: It was John - I don't want to malign anyone, he just didn't have that particular answer
Mar 19, 2015 at 5:20 AM - Mike Kelly: ok don't know of him, so eh
Mar 19, 2015 at 5:20 AM - JamesLogan: Let's get him!!!!
Mar 19, 2015 at 5:21 AM - Mike Kelly: lol
Mar 19, 2015 at 5:29 AM - jbigler1986: Best extrusion setting for cura?
Mar 19, 2015 at 5:29 AM - Mike Kelly: 1
Mar 19, 2015 at 5:30 AM - jbigler1986: I mean like Z hop distance, retract distance
Mar 19, 2015 at 5:30 AM - Mike Kelly: 1 and 2 is fine
Mar 19, 2015 at 5:37 AM - jbigler1986: Does it auto use my printer config? Didn't see an option to select it
Mar 19, 2015 at 5:37 AM - Mike Kelly: yes
Mar 19, 2015 at 5:37 AM - jbigler1986: Sweet.
Mar 19, 2015 at 5:38 AM - jbigler1986: Seems like more option here than in cura standalone
Mar 19, 2015 at 5:42 AM - jbigler1986: Probably forgot some settings. We shall see soon enough
Mar 19, 2015 at 5:44 AM - jbigler1986: Slices so much faster
Mar 19, 2015 at 5:46 AM - Mike Kelly: yeah that's one of curas main goals
Mar 19, 2015 at 5:47 AM - Mike Kelly: i'm ready for a nap U_U
Mar 19, 2015 at 5:48 AM - jbigler1986: Lol
Mar 19, 2015 at 5:48 AM - jbigler1986: 1.2 is good for top and bottom thickness right?
Mar 19, 2015 at 5:49 AM - Mike Kelly: yeah that's what i use
Mar 19, 2015 at 5:49 AM - Mike Kelly: texas really needs to close this gap
Mar 19, 2015 at 5:50 AM - Mike Glass: I thought z hop was bad?
Mar 19, 2015 at 5:52 AM - Mike Kelly: don doesn't like it, i do
Mar 19, 2015 at 5:52 AM - Mike Kelly: adds time though
Mar 19, 2015 at 5:52 AM - jbigler1986: I like it
Mar 19, 2015 at 5:53 AM - Mike Kelly: which is another person i don't think we'll be seeing much of anymore
Mar 19, 2015 at 5:53 AM - Mike Glass: I use 0.075 when I need it.
Mar 19, 2015 at 5:53 AM - jbigler1986: why is that
Mar 19, 2015 at 5:53 AM - Mike Kelly: he calls them speed bumps
Mar 19, 2015 at 5:54 AM - Mike Kelly: err wait what was your question at
Mar 19, 2015 at 5:54 AM - Mike Glass: why to not seeing much anymore
Mar 19, 2015 at 5:54 AM - jbigler1986: ^
Mar 19, 2015 at 5:54 AM - Mike Kelly: he just hasn't been around lately, usually when that happens they don't come back
Mar 19, 2015 at 5:56 AM - jbigler1986: I need a beer
Mar 19, 2015 at 5:57 AM - Mike Kelly: i've been on a bloody mary kick lately, i blame vegas
Mar 19, 2015 at 5:58 AM - jbigler1986: Butler better win
Mar 19, 2015 at 5:58 AM - Mike Kelly: man screw that, texas needs to win
Mar 19, 2015 at 5:58 AM - Mike Kelly: we need at least 1 big 12 win today ffs
Mar 19, 2015 at 5:58 AM - jbigler1986: Lol
Mar 19, 2015 at 5:58 AM - jbigler1986: I'm a Big Ten fan
Mar 19, 2015 at 5:58 AM - Mike Kelly: yeah i figured
Mar 19, 2015 at 5:59 AM - jbigler1986: We got way better seedings than we should have this year
Mar 19, 2015 at 5:59 AM - Mike Kelly: i was raised a michigan fan
Mar 19, 2015 at 5:59 AM - jbigler1986: Indiana didn't deserve it at all
Mar 19, 2015 at 5:59 AM - jbigler1986: lose like 8 of last 12
Mar 19, 2015 at 5:59 AM - Mike Kelly: this stupid feed keeps crashing at every commercial
Mar 19, 2015 at 5:59 AM - jbigler1986: brb
Mar 19, 2015 at 5:59 AM - Mike Kelly: and apparently i'm behind by like a lot on game time
Mar 19, 2015 at 6:00 AM - Mike Kelly: i think butlers gonna hold on
Mar 19, 2015 at 6:02 AM - Mike Glass: http://www.mcclurespickles.com/products/bloody-mary-mix here ya go Mike
Mar 19, 2015 at 6:03 AM - Mike Kelly: i think that's what i had at my aunts
Mar 19, 2015 at 6:03 AM - Mike Kelly: was really good, but strong
Mar 19, 2015 at 6:03 AM - Mike Glass: did u see the price holy hell
Mar 19, 2015 at 6:03 AM - Mike Kelly: for case of 12
Mar 19, 2015 at 6:03 AM - Mike Kelly: but yeah
Mar 19, 2015 at 6:03 AM - Mike Kelly: that's a lot
Mar 19, 2015 at 6:04 AM - Mike Glass: oh that it was for one jar..lol
Mar 19, 2015 at 6:04 AM - Mike Kelly: one of those mornings where i had a bloody mary, coffee, and water
Mar 19, 2015 at 6:04 AM - Mike Kelly: that would be one fancy bloody mary for 96
Mar 19, 2015 at 6:05 AM - Mike Glass: I was gonna say, must effin good for that price.
Mar 19, 2015 at 6:05 AM - Mike Kelly: it was pretty good
Mar 19, 2015 at 6:06 AM - Mike Kelly: best one i've had was this brand in texas, i forget the name though
Mar 19, 2015 at 6:06 AM - Mike Kelly: we just bought some zing zang
Mar 19, 2015 at 6:06 AM - Mike Kelly: i like it
Mar 19, 2015 at 6:07 AM - Mike Kelly: welp gg texas
Mar 19, 2015 at 6:07 AM - Mike Kelly: 0-3 in the big12
Mar 19, 2015 at 6:08 AM - Mike Kelly: though naturally i'm allergic to tomatoes
Mar 19, 2015 at 6:10 AM - Mike Glass: what kind of vodka do you like?
Mar 19, 2015 at 6:10 AM - Mike Kelly: i'm not particular, we have some colorado brand right now
Mar 19, 2015 at 6:10 AM - Mike Kelly: grape vodkas really good though
Mar 19, 2015 at 6:11 AM - Mike Kelly: i'm more of a scotch drinker
Mar 19, 2015 at 6:14 AM - Mike Kelly: http://imgur.com/a/xqauH one hellova progression in a year
Mar 19, 2015 at 6:22 AM - Mike Glass: Probably retired, thats what I plan on doing if and when I do..
Mar 19, 2015 at 6:22 AM - Mike Kelly: that's what my uncle does
Mar 19, 2015 at 6:23 AM - Printed Solid: what's up guys?
Mar 19, 2015 at 6:25 AM - Mike Glass: Hi PS
Mar 19, 2015 at 6:25 AM - Mike Kelly: sup printed
Mar 19, 2015 at 6:25 AM - Mike Kelly: that guy says he does wood working on weekends and evening
Mar 19, 2015 at 6:26 AM - Printed Solid: getting all packed up for reprap fest. expecting a good time,
Mar 19, 2015 at 6:26 AM - Mike Kelly: take lots of pictures if you can
Mar 19, 2015 at 6:26 AM - Mike Kelly: tell bigler to go
Mar 19, 2015 at 6:26 AM - Mike Kelly: say hi to josh and sanjay for me
Mar 19, 2015 at 6:26 AM - Mike Glass: if it was within 500 mile of me I would go.
Mar 19, 2015 at 6:27 AM - Mike Kelly: yeah i don't think i can justify 32 hours in the car this weekend
Mar 19, 2015 at 6:27 AM - Printed Solid: lots of pics for sure. I thought bigler was going?
Mar 19, 2015 at 6:27 AM - Printed Solid: planes
Mar 19, 2015 at 6:27 AM - Mike Kelly: he's thinking about it, still wishy washy
Mar 19, 2015 at 6:27 AM - Mike Kelly: yeah i just blew all my travel money in vegas
Mar 19, 2015 at 6:27 AM - Printed Solid: I'm going to take off tonight. stay in a hotel after a few hours. We're expecting a snow storm so I want to get past it.
Mar 19, 2015 at 6:28 AM - Mike Kelly: good plan
Mar 19, 2015 at 6:31 AM - Mike Kelly: i'm 2/6 on my bracket, geez
Mar 19, 2015 at 6:31 AM - jbigler1986: where do i place g29 in start code in cura
Mar 19, 2015 at 6:32 AM - jbigler1986: I place it at the end and it didn't work
Mar 19, 2015 at 6:32 AM - Mike Kelly: gotta be capital, G29

 

Mar 19, 2015 at 6:32 AM - Mike Kelly: i usually put it after G28
Mar 19, 2015 at 6:33 AM - jbigler1986: That did the trick. It was capital. Place it after G28. Testing now
Mar 19, 2015 at 6:33 AM - Mike Kelly: don't forget an offset
Mar 19, 2015 at 6:37 AM - jbigler1986: woops. It's .7 so do I do -.7
Mar 19, 2015 at 6:39 AM - Mike Kelly: if you use M565 yes
Mar 19, 2015 at 6:39 AM - jbigler1986: G1 Z-0.7?
Mar 19, 2015 at 6:39 AM - Mike Kelly: G1 is positive
Mar 19, 2015 at 6:39 AM - Mike Kelly: if you use G1 Z0.7 G92 Z0
Mar 19, 2015 at 6:40 AM - Mike Kelly: you can simplify that to one command with M565 Z-0.7
Mar 19, 2015 at 6:40 AM - jbigler1986: do i need to delete this "G92 E0 ; Reset extruder position"
Mar 19, 2015 at 6:40 AM - Mike Kelly: nope
Mar 19, 2015 at 6:41 AM - Mike Kelly: that's to be expected
Mar 19, 2015 at 6:41 AM - jbigler1986: Alright. 3rd time is the charm. Did Texas win?
Mar 19, 2015 at 6:41 AM - Mike Kelly: nope
Mar 19, 2015 at 6:42 AM - jbigler1986: The only blowout so far has been Arizona
Mar 19, 2015 at 6:43 AM - Mike Kelly: yeah, todays been crazy
Mar 19, 2015 at 6:43 AM - Mike Kelly: the UCLA ending was nuts
Mar 19, 2015 at 6:43 AM - jbigler1986: I didn't see that. Let me google it
Mar 19, 2015 at 6:45 AM - jbigler1986: Wow.
Mar 19, 2015 at 6:45 AM - jbigler1986: I had SMU winning a few games. Uggghh
Mar 19, 2015 at 6:46 AM - Mike Kelly: i swore i had ucla on one of mine, nope
Mar 19, 2015 at 6:47 AM - jbigler1986: won't extrude. poop
Mar 19, 2015 at 6:48 AM - jbigler1986: there
Mar 19, 2015 at 6:49 AM - jbigler1986: Where is AJ so I can fix his madness
Mar 19, 2015 at 6:51 AM - jbigler1986: Oh my. bottom layer looks horrible. Need to lower z more
Mar 19, 2015 at 6:56 AM - jbigler1986: http://imgur.com/PNRnNIM
Mar 19, 2015 at 6:58 AM - jbigler1986: http://imgur.com/PNRnNlM
Mar 19, 2015 at 7:03 AM - jbigler1986: Height is good but there is still a gap between 1st layer lines. Is there a setting I'm missing
Mar 19, 2015 at 7:07 AM - Printed Solid: That looks way too high to me.
Mar 19, 2015 at 7:09 AM - jbigler1986: i changed it after that
Mar 19, 2015 at 7:10 AM - jbigler1986: There are little gabs in lines on all layers so far. Under extrusion?
Mar 19, 2015 at 7:11 AM - jbigler1986: gaps
Mar 19, 2015 at 7:11 AM - Printed Solid: it might be, but when you have a first layer that far off, it takes a while before you build up enough layer compression to get decent layers again.
Mar 19, 2015 at 7:12 AM - Printed Solid: if it's underextrusion, you can typically fudge it by bumping up temp and/or extrusion rate
Mar 19, 2015 at 7:15 AM - jbigler1986: http://imgur.com/oQII1nw
Mar 19, 2015 at 7:16 AM - Mike Glass: that model is doinked dude
Mar 19, 2015 at 7:16 AM - jbigler1986: Let me get a cube
Mar 19, 2015 at 7:25 AM - tatajer: month to wait for replacement parts on my new printer, only to continue to have issues..ugh. was going so well the first month.
Mar 19, 2015 at 7:26 AM - tatajer: either way this is a fun toy.
Mar 19, 2015 at 7:26 AM - Mike Glass: buy some spare parts you will thank me later..amazon is your friend
Mar 19, 2015 at 7:31 AM - Mike Kelly: what broke?
Mar 19, 2015 at 7:36 AM - tatajer: bearings. already replaced and just can't figure out this problem now: http://community.robo3d.com/index.php?threads/inconsistent-extrusion-problems-grinding-jamming.4889/
Mar 19, 2015 at 7:41 AM - jbigler1986: Tutles
Mar 19, 2015 at 8:26 AM - Mike Glass: Tutles?
Mar 19, 2015 at 8:32 AM - Mike Kelly: I like Tutles
Mar 19, 2015 at 8:43 AM - jbigler1986: Purdue game interrupted me
Mar 19, 2015 at 8:44 AM - jbigler1986: Is there a good z offset test? Or just eye test
Mar 19, 2015 at 8:44 AM - Mike Glass: low and smooth
Mar 19, 2015 at 8:45 AM - Bill Monroe: hey, can you guys see this? http://vaughnlive.tv/socalplanedoc
Mar 19, 2015 at 8:46 AM - Mike Kelly: Eye test
Mar 19, 2015 at 9:17 AM - jbigler1986: What's next today. Kentucky losing. Craziness
Mar 19, 2015 at 9:52 AM - Mike Kelly: man that would be so delicious
Mar 19, 2015 at 9:59 AM - jbigler1986: Yes it would
Mar 19, 2015 at 10:04 AM - Mike Kelly: gotta love getting accused of not being helpful when people ignore my advice
Mar 19, 2015 at 10:04 AM - jbigler1986: What now
Mar 19, 2015 at 10:16 AM - Mike Kelly: oh nothing
Mar 19, 2015 at 10:18 AM - jbigler1986: Anybody have a cura profile I can try? I will just adjust temps and offset
Mar 19, 2015 at 10:19 AM - Mike Kelly: http://www.engadget.com/2015/03/19/...ium=feed&utm_campaign=Engadget&?ncid=rss_full LOL
Mar 19, 2015 at 10:28 AM - Mike Glass: how did you think I built my robo mini..lol
Mar 19, 2015 at 10:29 AM - Mike Glass: what do you mean cura profile?
Mar 19, 2015 at 10:30 AM - Mike Kelly: wow that shot by cinci
Mar 19, 2015 at 10:30 AM - jbigler1986: If using cura you can save your profile with all of your settings
Mar 19, 2015 at 10:30 AM - jbigler1986: Ahhhhhhh. Overtime
Mar 19, 2015 at 10:36 AM - AJinFLA: hey Jig, saw you in here, wanted to thank you for being so helpful, I got squared away, Appreciate your time very much sir
Mar 19, 2015 at 10:40 AM - Mike Kelly: wow purdue cannot make a basket
Mar 19, 2015 at 10:42 AM - jbigler1986: Nope
Mar 19, 2015 at 10:46 AM - Mike Kelly: ouch
Mar 19, 2015 at 10:48 AM - jbigler1986: Oh well. Only have 1 senior. We will be back
Mar 19, 2015 at 10:49 AM - Mike Kelly: yup
Mar 19, 2015 at 10:49 AM - jbigler1986: Can you upload your cura profile?
Mar 19, 2015 at 10:54 AM - Mike Kelly: yeah sure one sec
Mar 19, 2015 at 10:55 AM - Mike Kelly: probably won't be very helpful for you: https://www.dropbox.com/s/49e1nt0ego8f4vh/Cura Profile 3-19.ini?dl=0
Mar 19, 2015 at 10:56 AM - jbigler1986: Worth a try
Mar 19, 2015 at 11:21 AM - jbigler1986: Who fixed AJ issue
Mar 19, 2015 at 11:41 AM - Mike Glass: ?
Mar 19, 2015 at 11:42 AM - Mike Kelly: i guess he fixed it on his own
Mar 19, 2015 at 11:42 AM - Mike Kelly: at least that's what he said to ziggy
Mar 19, 2015 at 11:42 AM - Mike Kelly: who knows
Mar 19, 2015 at 11:42 AM - Mike Kelly: PEBKAC
Mar 19, 2015 at 11:42 AM - Mike Glass: who is jig
Mar 19, 2015 at 11:42 AM - Mike Kelly: lol
Mar 19, 2015 at 11:42 AM - Mike Glass: I wish harry would fix the fucking time in here
Mar 19, 2015 at 11:44 AM - jbigler1986: Probablygoes off of the server time
Mar 19, 2015 at 11:45 AM - jbigler1986: Testing your profile
Mar 19, 2015 at 11:46 AM - Mike Kelly: it would be nice if he did something....
Mar 19, 2015 at 11:46 AM - Mike Glass: anybody experience sweet smelling pla, like you want to eat it?
Mar 19, 2015 at 11:47 AM - jbigler1986: yes. smells like syrup
Mar 19, 2015 at 11:47 AM - Mike Kelly: yeah pla smells alrigh
Mar 19, 2015 at 11:47 AM - Mike Glass: I just notice it on my silver
Mar 19, 2015 at 11:47 AM - Mike Kelly: better than ABS
Mar 19, 2015 at 11:48 AM - jbigler1986: http://imgur.com/akDAKJa
Mar 19, 2015 at 11:48 AM - jbigler1986: That was my wonderful Cura settings
Mar 19, 2015 at 11:48 AM - Mike Glass: only my blue abs has a smell to it. black doesnt unless you have your nose right on it.
Mar 19, 2015 at 11:49 AM - Mike Glass: man you have that dialed in JB
Mar 19, 2015 at 11:49 AM - jbigler1986: IKR
Mar 19, 2015 at 11:49 AM - Mike Kelly: lol
Mar 19, 2015 at 11:49 AM - jbigler1986: I don't think I touching settings beccause it's so perfect
Mar 19, 2015 at 11:51 AM - jbigler1986: What does that plugin you have do MK?
Mar 19, 2015 at 11:51 AM - Mike Kelly: probably nothing
Mar 19, 2015 at 11:51 AM - Mike Kelly: i never got plugins to work

 

Mar 19, 2015 at 11:53 AM - jbigler1986: bottom layers look good so far
Mar 19, 2015 at 12:01 PM - Mike Glass: http://imgur.com/hDAcgsl
Mar 19, 2015 at 12:06 PM - Mike Kelly: Heh neat
Mar 19, 2015 at 12:08 PM - Mike Glass: still WIP but trying to figure out what to do with it. table light or or hangin light for my sons bedroom.
Mar 19, 2015 at 12:52 PM - jbigler1986: get ready to call me a moron
Mar 19, 2015 at 12:53 PM - jbigler1986: Had my Robo config set to .8 nozzle with my .4 nozzle on in Repetier.
Mar 19, 2015 at 12:55 PM - jbigler1986: facepalm
Mar 19, 2015 at 1:06 PM - Mike Glass: Moron
Mar 19, 2015 at 1:06 PM - Mike Glass: lol
Mar 19, 2015 at 1:07 PM - jbigler1986: Yep
Mar 19, 2015 at 1:07 PM - Mike Glass: did you have some overextrusion
Mar 19, 2015 at 1:07 PM - Mike Glass: or do you have your .8 on now
Mar 19, 2015 at 1:08 PM - jbigler1986: I have my .4 on. it was just a nightmare all over as you could see in my pics
Mar 19, 2015 at 1:08 PM - Mike Glass: underextrusion then. yep
Mar 19, 2015 at 1:09 PM - jbigler1986: I made a different profile for my .8
Mar 19, 2015 at 1:10 PM - Mike Glass: im building a big ass vase now.
Mar 19, 2015 at 1:10 PM - jbigler1986: Not sure how the setting got moved to my other one. Oh well. Nobodies fault but my own
Mar 19, 2015 at 1:10 PM - jbigler1986: vid or it's not happening
Mar 19, 2015 at 1:11 PM - Mike Glass: same place it always is..lol
Mar 19, 2015 at 1:11 PM - Mike Glass: http://vaughnlive.tv/coolreactions
Mar 19, 2015 at 1:12 PM - jbigler1986: what color is that
Mar 19, 2015 at 1:13 PM - Mike Glass: yellow
Mar 19, 2015 at 1:13 PM - Mike Glass: translucent yellow
Mar 19, 2015 at 1:14 PM - Mike Glass: cant wait to get rid of these blue lights for when the video runs
Mar 19, 2015 at 1:15 PM - jbigler1986: I know. I'm fixing that saturday or tomorrow night
Mar 19, 2015 at 1:15 PM - Mike Glass: what did you find
Mar 19, 2015 at 1:16 PM - jbigler1986: lights wise?
Mar 19, 2015 at 1:17 PM - Mike Glass: yea
Mar 19, 2015 at 1:19 PM - jbigler1986: http://www.frys.com/product/7931760?site=sr:SEARCH:MAIN_RSLT_PG
Mar 19, 2015 at 1:19 PM - jbigler1986: gonna be external powered.
Mar 19, 2015 at 1:20 PM - jbigler1986: it will be hidden though
Mar 19, 2015 at 1:20 PM - Mike Glass: why rgb
Mar 19, 2015 at 1:21 PM - jbigler1986: i guess i could get brighter
Mar 19, 2015 at 1:21 PM - jbigler1986: what are u going with
Mar 19, 2015 at 1:21 PM - Mike Glass: I have some like that but I want super white
Mar 19, 2015 at 1:25 PM - Mike Glass: http://www.amazon.com/Triangle-Bulb...6825411&sr=8-3&keywords=super+white+led+light
Mar 19, 2015 at 1:26 PM - jbigler1986: hmmm
Mar 19, 2015 at 1:27 PM - Mike Glass: think I can get 16 feet in the robo..lol
Mar 19, 2015 at 1:28 PM - jbigler1986: lol
Mar 19, 2015 at 1:29 PM - Mike Glass: I could use do 8 feet easily
Mar 19, 2015 at 1:31 PM - jbigler1986: it would be so bright
Mar 19, 2015 at 1:33 PM - Mike Glass: thats what the dimmer is for.
Mar 19, 2015 at 1:36 PM - Mike Glass: This might be cool to mount towards the top and ajustable.
Mar 19, 2015 at 1:41 PM - Mike Glass: ok well im off to bed, l8tr
Mar 19, 2015 at 3:07 PM - toy: yo
Mar 19, 2015 at 3:09 PM - toy: quiet nite....