Shoutbox Archive

Mar 19, 2015 9:12 PM - jbigler1986: Good morning
Mar 19, 2015 10:20 PM - JeffTheMess: TGIF! Good morning!
Mar 19, 2015 10:23 PM - jbigler1986: I know. Been a hell of a week
Mar 19, 2015 10:24 PM - jbigler1986: I was running my .4 nozzle with a .8 setting in my slicer. Woops. That's what my issue has been the past 2 days
Mar 19, 2015 10:26 PM - JeffTheMess: wow...that must have been fun for you printer
Mar 19, 2015 10:27 PM - jbigler1986: It was under extruding, layers weren't adhering
Mar 19, 2015 10:30 PM - JeffTheMess: once fix everything went good?
Mar 19, 2015 10:30 PM - jbigler1986: http://www.ustream.tv/channel/jbigler1986
Mar 19, 2015 10:35 PM - JeffTheMess: beautiful
Mar 19, 2015 10:35 PM - JeffTheMess: did the box come out okay?
Mar 19, 2015 10:37 PM - jbigler1986: Haven't tried to reprint it after I fixed the nozzle size. Didn't want to try it while at work.
Mar 19, 2015 10:38 PM - jbigler1986: Is there a good way to sand/smooth PLA? Not the chemical way
Mar 19, 2015 10:45 PM - JeffTheMess: Good ol' sanding, bondo, modeling clay, its the only way because pla is organic so it behaves a bit different than others
Mar 19, 2015 10:48 PM - JeffTheMess: I've tried also plaster of paris myself and came out ok... its tough
Mar 19, 2015 10:50 PM - jbigler1986: Guess I don't need to "smooth" it. Just need to sand edges a little bit for a better fit
Mar 19, 2015 10:50 PM - JeffTheMess: You got a dremel?
Mar 19, 2015 10:52 PM - jbigler1986: I do
Mar 19, 2015 10:53 PM - jbigler1986: I should print a dremel stand thing so it turns it into a little sander
Mar 19, 2015 10:55 PM - JeffTheMess: it works wonders for sanding
Mar 19, 2015 10:55 PM - JeffTheMess: http://www.sears.com/dremel-225-fle...=SPM161715368&kpid=SPM161715368&mktRedirect=y
Mar 19, 2015 10:56 PM - JeffTheMess: the attachment is good I dont own one but ive tried it and its adds precision
Mar 19, 2015 11:05 PM - JeffTheMess: whats the angle of your print? its pretty deep
Mar 19, 2015 11:07 PM - jbigler1986: Not sure
Mar 19, 2015 11:09 PM - JeffTheMess: its good though
Mar 19, 2015 11:09 PM - jbigler1986: Yeah. It's looking good
Mar 19, 2015 11:16 PM - JeffTheMess: http://www.thingiverse.com/thing:1570
Mar 19, 2015 11:25 PM - Mike Kelly: mornin
Mar 19, 2015 11:28 PM - jbigler1986: morning
Mar 19, 2015 11:28 PM - Mike Kelly: good job on the .8 nozzle
Mar 19, 2015 11:28 PM - jbigler1986: I know. Woops
Mar 19, 2015 11:28 PM - Mike Kelly: that's pretty funny
Mar 19, 2015 11:29 PM - jbigler1986: I created a whole profile with .8 nozzle so that's why I didn't even think to check it.
Mar 19, 2015 11:29 PM - jbigler1986: My own fault
Mar 19, 2015 11:32 PM - jbigler1986: http://www.thingiverse.com/thing:559263
Mar 19, 2015 11:32 PM - Mike Kelly: i've done dumber things
Mar 19, 2015 11:33 PM - JeffTheMess: the dremel sanding table
Mar 19, 2015 11:33 PM - Mike Kelly: that guy does really cool things
Mar 19, 2015 11:34 PM - jbigler1986: I want to use the dremel itself to sand. I have plenty of attachments for it. Just need a good stand for it
Mar 19, 2015 11:40 PM - JeffTheMess: if you never used the dremel so sand try it on a test print with flat planes and curves, loops and all different shapes
Mar 19, 2015 11:42 PM - Mike Kelly: isn't there some attachment for the dremel for sanding plastic that dissipates heat so you don't just melt the part
Mar 19, 2015 11:44 PM - JeffTheMess: shouldn't be out of the realm of doing since dremel has their own 3d printer would be a good investment on their part to have
Mar 19, 2015 11:45 PM - JeffTheMess: Ive seen crazy people used that heat to fuse parts together
Mar 19, 2015 11:45 PM - jbigler1986: Can run in slow
Mar 19, 2015 11:45 PM - Mike Kelly: yeah you just put a piece of filament in
Mar 19, 2015 11:48 PM - Stephen Capistron: should use this in place of the dremel
Mar 19, 2015 11:48 PM - Stephen Capistron: http://www.thingiverse.com/thing:76369
Mar 19, 2015 11:48 PM - Stephen Capistron: suck up the dust and sand and keep the part cool all at once
Mar 19, 2015 11:51 PM - JeffTheMess: That's a smart guy
Mar 19, 2015 11:54 PM - jbigler1986: Interesting
Mar 19, 2015 11:56 PM - Stephen Capistron: no idea how good it works, and it might be better if the flow of air were perpendicular to the axis of rotation
Mar 20, 2015 12:00 AM - JeffTheMess: That's true
Mar 20, 2015 12:06 AM - JeffTheMess: The only bad thing I see is flexibility with the dremel you can bend it in ways that a vacuum hose won't be able to, right?
Mar 20, 2015 12:10 AM - Stephen Capistron: compared to the flex shaft, yeah
Mar 20, 2015 12:23 AM - Mike Glass: effin cool http://imgur.com/a/d5D1j morning btw
Mar 20, 2015 12:24 AM - Mike Kelly: yeah that computer owns
Mar 20, 2015 12:24 AM - Mike Glass: love what he did with the optic fiber. so cool.
Mar 20, 2015 12:24 AM - Mike Kelly: won him the functional prints contest
Mar 20, 2015 12:24 AM - Mike Kelly: totally
Mar 20, 2015 12:24 AM - Mike Kelly: that's my favorite part
Mar 20, 2015 12:25 AM - Mike Glass: hmm maybe a use for the old robo blue lights..
Mar 20, 2015 12:26 AM - JeffTheMess: Enough to make a grown man cry
Mar 20, 2015 12:26 AM - Mike Kelly: hmm harbor freight has a "spend 100, get 20% off everything" coupon
Mar 20, 2015 12:30 AM - Mike Kelly: https://plus.google.com/u/1/108174581197321031878/posts/9XdicBYABV9?cfem=1 holy crap
Mar 20, 2015 12:32 AM - JeffTheMess: Mechanical steroids
Mar 20, 2015 12:37 AM - Stephen Capistron: that thing is a monster
Mar 20, 2015 12:38 AM - Stephen Capistron: Better have a large nozzle on that thing
Mar 20, 2015 12:40 AM - Mike Kelly: if you're printing pellets i'm sure it does
Mar 20, 2015 12:43 AM - JeffTheMess: Im amazed that hasn't gone more mainstream yet in the 3d printing world atleast going from pellets to filament i know its out there but not enough
Mar 20, 2015 12:48 AM - Stephen Capistron: must have ot do with the mass of the print head and / or the compressability of molten plastic
Mar 20, 2015 12:48 AM - Stephen Capistron: You could have a bowden type setup where the pellets are melted and pumped through a tube, but if you can't keep the tube warm i can see it just jamming
Mar 20, 2015 12:50 AM - Mike Kelly: yeah that's too complex, better to pump pellets through a feed tube and melt in the nozzle
Mar 20, 2015 12:50 AM - Mike Kelly: though you'd have a hard time getting them to flow consistently
Mar 20, 2015 12:50 AM - Mike Kelly: or take the pellets, convert them into a large size tube, then run that tube through another tube.... wait
Mar 20, 2015 12:50 AM - Stephen Capistron: lead screws might work a little better with that kind of mass right?
Mar 20, 2015 12:52 AM - Mike Kelly: for the Z?
Mar 20, 2015 12:52 AM - Stephen Capistron: even the x and y
Mar 20, 2015 12:53 AM - Mike Kelly: eh nothings wrong with belts
Mar 20, 2015 12:53 AM - Mike Kelly: if you don't have to support against gravity
Mar 20, 2015 12:55 AM - Stephen Capistron: is there any advantage to screws in the x and y?
Mar 20, 2015 12:57 AM - Mike Kelly: i'm not sure there's much advantage to lead screws, ball screws would have higher precision with faster movement
Mar 20, 2015 12:58 AM - Mike Kelly: but belts are pretty nice, lots of POC and low inertia
Mar 20, 2015 1:15 AM - jbigler1986: Damn today. Swamped
Mar 20, 2015 1:24 AM - Mike Kelly: i just hope KU wins, big 12 really can't go 0-4
Mar 20, 2015 1:29 AM - jbigler1986: I would be screwed forsure
Mar 20, 2015 1:52 AM - jbigler1986: KU looks good
Mar 20, 2015 1:52 AM - Mike Kelly: yeah they do
Mar 20, 2015 1:53 AM - Mike Kelly: they just need to maintain their composure
Mar 20, 2015 2:23 AM - jbigler1986: Groupon sucks
Mar 20, 2015 2:25 AM - Mike Kelly: agreed, i don't like it
Mar 20, 2015 2:26 AM - jbigler1986: I have never actually used it. Just dealing with their sales team. They are a pain in the ass
Mar 20, 2015 2:27 AM - Stephen Capistron: but it has a $5B market cap, it has to be awesome
Mar 20, 2015 2:28 AM - Mike Kelly: women love that shit
Mar 20, 2015 2:28 AM - Mike Kelly: "OMG I SAVE $20"
Mar 20, 2015 2:28 AM - Mike Kelly: no you spent $20
Mar 20, 2015 2:28 AM - Mike Kelly: plus more because you can't buy anything with 1 groupon
Mar 20, 2015 2:29 AM - Stephen Capistron: My wife has an addiction to RueLaLa
Mar 20, 2015 2:29 AM - Stephen Capistron: it is painful
Mar 20, 2015 2:29 AM - jbigler1986: Never heard of it
Mar 20, 2015 2:30 AM - Mike Kelly: my wife is addicted to Zullily
Mar 20, 2015 2:30 AM - Stephen Capistron: They excel at selling you things you want but don't need

 

Mar 20, 2015 2:30 AM - Stephen Capistron: like a 3d printer
Mar 20, 2015 2:30 AM - jbigler1986: Nooooooo
Mar 20, 2015 2:30 AM - jbigler1986: I need my 3D printer. Lol
Mar 20, 2015 2:31 AM - Stephen Capistron: they don't sell 3d printers, but you get what i mean
Mar 20, 2015 2:36 AM - Stephen Capistron: You guys know what time of year it is?
Mar 20, 2015 2:37 AM - Mike Kelly: spring time?
Mar 20, 2015 2:37 AM - Stephen Capistron: homemade pastrami season with all of the left over corned beef
Mar 20, 2015 2:38 AM - Mike Kelly: more like corned beef hash
Mar 20, 2015 2:43 AM - jbigler1986: Yes. I like horned beef hash if it's fresh. My wife likes it out of a can. Gross
Mar 20, 2015 2:44 AM - Mike Kelly: i like both
Mar 20, 2015 2:45 AM - jbigler1986: Chipped beef is better
Mar 20, 2015 2:52 AM - Mike Glass: Im having left over corned beef and cabbage for lunch
Mar 20, 2015 2:53 AM - jbigler1986: Nothing beats some deer sausage though
Mar 20, 2015 2:54 AM - Mike Glass: elk does
Mar 20, 2015 2:55 AM - jbigler1986: I like elk. Never had elk sausage though
Mar 20, 2015 2:56 AM - jbigler1986: deer jerky is pretty amazing too
Mar 20, 2015 2:57 AM - Mike Glass: You can make sausage or jerky out of anything really, just depends on the spices.
Mar 20, 2015 2:58 AM - Mike Glass: I need to make some more jerky, I have some elk in the freezer I should use.
Mar 20, 2015 2:58 AM - jbigler1986: mmmmm
Mar 20, 2015 2:58 AM - jbigler1986: Yeah it's dehydrated
Mar 20, 2015 2:59 AM - jbigler1986: Now I want some
Mar 20, 2015 2:59 AM - Mike Kelly: you guys are making me hungry
Mar 20, 2015 2:59 AM - Mike Glass: I have a smoker, havent used it for a few years.
Mar 20, 2015 3:00 AM - jbigler1986:
Mar 20, 2015 3:01 AM - Stephen Capistron: Mine is getting wheeled out from this long cold winter this weekend
Mar 20, 2015 3:02 AM - Mike Kelly: i'm still wondering when our next snow storm is gonna come
Mar 20, 2015 3:02 AM - Mike Kelly: this has been an insanely dry march
Mar 20, 2015 3:02 AM - Mike Kelly: our summer is gonna be firey
Mar 20, 2015 3:02 AM - Mike Glass: I just have a little chiefs
Mar 20, 2015 3:02 AM - jbigler1986: Yep. Hopefully it's not to bad for you guys though
Mar 20, 2015 3:03 AM - Mike Glass: We are in the same boat, very dry.
Mar 20, 2015 3:03 AM - Stephen Capistron: http://www.broilkingbbq.com/grills.php?series=9
Mar 20, 2015 3:04 AM - Mike Kelly: we can still recovery if april is exceptionally snowy
Mar 20, 2015 3:04 AM - Stephen Capistron: Got mine before Broil King bought them
Mar 20, 2015 3:04 AM - Mike Glass: we need about 3 feet
Mar 20, 2015 3:04 AM - Mike Glass: we usually get dumped on in the end of March though
Mar 20, 2015 3:05 AM - Mike Kelly: yeah same with us, april and march are our snowiest months
Mar 20, 2015 3:06 AM - Mike Glass: last April was our dump.
Mar 20, 2015 3:07 AM - Mike Glass: we had like one 12" dump this season, so we need some bad.
Mar 20, 2015 3:08 AM - Stephen Capistron: i get up for one second and I come back to you guys talking about how constipated you are
Mar 20, 2015 3:09 AM - Mike Kelly: haha
Mar 20, 2015 3:09 AM - Mike Glass: The earth is constipated.
Mar 20, 2015 3:10 AM - Stephen Capistron: barking up the wrong tree there.https://www.google.com/search?q=fen...yS5lBM%2C_&usg=__U2vCwZW-_Z9ri0x9eEZo3hv6I1I=
Mar 20, 2015 3:10 AM - Mike Kelly: yeah while colorado is turning into a desert
Mar 20, 2015 3:11 AM - Stephen Capistron: http://www.csmonitor.com/Environmen...but-it-has-been-the-warmest-winter-ever-video
Mar 20, 2015 3:12 AM - Mike Kelly: yup, each year will be warmer than the last too
Mar 20, 2015 3:12 AM - Mike Kelly: yet people are more concerned about earthquakes from fracking than all the coal we're burning....
Mar 20, 2015 3:13 AM - Stephen Capistron: NOAA has a great picture I can't find right now but it essentially shows the whole earth being warmer (red) except for the north east which is dark blue
Mar 20, 2015 3:14 AM - Stephen Capistron: Colorado does pretty good with wind
Mar 20, 2015 3:14 AM - Mike Kelly: yeah we do
Mar 20, 2015 3:14 AM - Mike Kelly: though you should see the train loads of coal, just makes me depressed
Mar 20, 2015 3:14 AM - Mike Glass: lot of hot air over there
Mar 20, 2015 3:15 AM - Mike Kelly: tons of shifting weather patterns
Mar 20, 2015 3:15 AM - Stephen Capistron: https://timedotcom.files.wordpress.com/2015/03/noaa-weather.jpg?quality=65&strip=color&w=560&h=433
Mar 20, 2015 3:17 AM - Mike Glass: thats funny we had record breaking and shows higher than average, guess they dont count MT
Mar 20, 2015 3:18 AM - Stephen Capistron: its on average from december through february
Mar 20, 2015 3:18 AM - jbigler1986: http://www.ustream.tv/channel/jbigler1986 Much better. Lol
Mar 20, 2015 3:18 AM - Stephen Capistron: one cold or hot day won't move the needle much
Mar 20, 2015 3:19 AM - Mike Glass: we are usually in the -20's in feb, we were in the 40-60's.
Mar 20, 2015 3:20 AM - Stephen Capistron: you guys are going to be without a glacier soon
Mar 20, 2015 3:20 AM - Mike Glass: yep
Mar 20, 2015 3:20 AM - Mike Glass: what is that JB?
Mar 20, 2015 3:20 AM - Mike Kelly: i thought the glacier was already gone
Mar 20, 2015 3:20 AM - jbigler1986: 3ds game holder for my son
Mar 20, 2015 3:21 AM - jbigler1986: Haven't printed the lid yet
Mar 20, 2015 3:21 AM - jbigler1986: Need to buy some red and yellow pla today. Along with white led's
Mar 20, 2015 3:22 AM - Mike Glass: https://encrypted-tbn1.gstatic.com/...q5ncrBSoxAIPZiJlC_dl2McS6wRyLs2Wa8ReJDTZZZy8g
Mar 20, 2015 3:22 AM - Stephen Capistron: 2030 is the projected elimination of the glaciers
Mar 20, 2015 3:22 AM - Mike Kelly: better make a trip then...
Mar 20, 2015 3:23 AM - Stephen Capistron: That is one tough place to get to
Mar 20, 2015 3:23 AM - jbigler1986: I want to take an Alaskan cruise
Mar 20, 2015 3:24 AM - Mike Glass: Alaska is so cool
Mar 20, 2015 3:24 AM - Mike Glass: I think they will be there at least till 2045
Mar 20, 2015 3:25 AM - Stephen Capistron: Juneau you can't drive to Juneau
Mar 20, 2015 3:25 AM - Mike Glass: Nope, take the boat or fly
Mar 20, 2015 3:25 AM - toy: howdy
Mar 20, 2015 3:27 AM - jbigler1986: Just be a badass and hike
Mar 20, 2015 3:27 AM - jbigler1986: and swim
Mar 20, 2015 3:28 AM - Mike Kelly: hello toy
Mar 20, 2015 3:28 AM - toy: took me forever to get back signed in lol
Mar 20, 2015 3:28 AM - toy: made a new account
Mar 20, 2015 3:28 AM - Mike Kelly: ah
Mar 20, 2015 3:28 AM - Mike Kelly: what happened to toymaker
Mar 20, 2015 3:28 AM - toy: which required making a new email address etc...
Mar 20, 2015 3:29 AM - toy: less formal =)
Mar 20, 2015 3:30 AM - toy: i orded over 1k of used linear components from korea and they should be here today
Mar 20, 2015 3:30 AM - Mike Kelly: wow
Mar 20, 2015 3:30 AM - Mike Kelly: send me some
Mar 20, 2015 3:31 AM - toy: i got about 1500 worth for 1000 and free shipping
Mar 20, 2015 3:31 AM - toy: its here!!!!!!
Mar 20, 2015 3:31 AM - Mike Kelly: for your CNC project?
Mar 20, 2015 3:31 AM - jbigler1986: Sounds like you are about to be busy
Mar 20, 2015 3:35 AM - toy: yeah
Mar 20, 2015 3:35 AM - toy: let me open it up and rake some picks
Mar 20, 2015 3:35 AM - toy: pics
Mar 20, 2015 3:37 AM - toy: its gonna be a 4 axis cnc for milling aluminum
Mar 20, 2015 3:42 AM - JeffTheMess: Get your new Mattercontrol Plus
Mar 20, 2015 3:48 AM - Mike Glass: eww
Mar 20, 2015 3:48 AM - Mike Glass: you mean Splattercontrol?
Mar 20, 2015 3:48 AM - JeffTheMess: robo selling a really fancy sd card now touch screen

 

Mar 20, 2015 3:49 AM - jbigler1986: I would never buy that.
Mar 20, 2015 3:49 AM - Mike Glass: yea matter has them, robo just dumb enough to seel with it.
Mar 20, 2015 3:49 AM - Stephen Capistron: Wouldn't having an octoprint be a better setup than a dedicated touch screen?
Mar 20, 2015 3:49 AM - jbigler1986: If it was $20 I would maybe
Mar 20, 2015 3:50 AM - jbigler1986: Depends. Not sure if you can access it outside of your network
Mar 20, 2015 3:50 AM - JeffTheMess: according to them you can
Mar 20, 2015 3:51 AM - JeffTheMess: but not worth it
Mar 20, 2015 3:51 AM - jbigler1986: Not worth that price at all though
Mar 20, 2015 3:56 AM - jbigler1986: Wish I could get octopi setup
Mar 20, 2015 3:57 AM - JeffTheMess: the tablet alone is $300 which you can go to best buy and buy it for 150 bucks
Mar 20, 2015 3:59 AM - jbigler1986: I wonder if I can get ahold of the software they use
Mar 20, 2015 3:59 AM - JeffTheMess: you probably can but even then may not be worth ot
Mar 20, 2015 4:00 AM - jbigler1986: well I have tablets to spare to at least test it on to see if it's any good
Mar 20, 2015 4:00 AM - Stephen Capistron: yeah, you would want MatterControl software because ......
Mar 20, 2015 4:01 AM - jbigler1986: not to slice thats forsure
Mar 20, 2015 4:02 AM - jbigler1986: if you can print gcode and control pit from outside of network it might be ok
Mar 20, 2015 4:09 AM - JeffTheMess: ehh...I wish I knew how to work Cura, till then Im stuck in mattercontrol yay for me
Mar 20, 2015 4:10 AM - jbigler1986: Go to repetier. Or follow MK Cura guide
Mar 20, 2015 4:14 AM - Mike Kelly: at the end of the day you'd still have to use MC with it
Mar 20, 2015 4:15 AM - jbigler1986: Yeah screw that
Mar 20, 2015 4:16 AM - jbigler1986: I'm going to contact Repetier about how to get the config file for Repetier host
Mar 20, 2015 4:16 AM - jbigler1986: I mean Repetier Server
Mar 20, 2015 4:18 AM - Mike Glass: haha JB was in love with MC..lol
Mar 20, 2015 4:19 AM - jbigler1986: For a few yes. Not anymore
Mar 20, 2015 4:19 AM - jbigler1986: That shit just pissed me off
Mar 20, 2015 4:20 AM - Mike Glass: I use repitwa for everyting now.
Mar 20, 2015 4:21 AM - jbigler1986: Hey MG find out how to export printer config from it. I will give you $1
Mar 20, 2015 4:22 AM - JeffTheMess: sounds like a bargain
Mar 20, 2015 4:24 AM - Mike Glass: export from what?
Mar 20, 2015 4:24 AM - jbigler1986: repetier host
Mar 20, 2015 4:24 AM - Mike Glass: easy copy, paste
Mar 20, 2015 4:25 AM - jbigler1986: you need printer config file for repetier server
Mar 20, 2015 4:25 AM - Mike Glass: or save as
Mar 20, 2015 4:25 AM - toy: http://imgur.com/2HsKURL
Mar 20, 2015 4:26 AM - jbigler1986: is that a .50 CAL? Jk
Mar 20, 2015 4:26 AM - Mike Glass: hmm Might have to mess with that this weekend. Im thinking on starting my cnc project need to stop at the store and see what will get me started.
Mar 20, 2015 4:26 AM - Mike Glass: hey parts from my shopsmith..lol
Mar 20, 2015 4:29 AM - toy: thk ground ball screw and blocks =)
Mar 20, 2015 4:29 AM - toy: thk 25mm x 1000mm rails
Mar 20, 2015 4:30 AM - toy: thk 30mm rail w/ iko super roller x blocks
Mar 20, 2015 4:32 AM - toy: im thinking about dropping the z- axis on my bridgeport and building an x - y table right on top of the existing bridgeport table
Mar 20, 2015 4:32 AM - toy: or build a seperate machine
Mar 20, 2015 4:37 AM - toy: http://imgur.com/Jn6NbnD and my super robo printer
Mar 20, 2015 4:38 AM - toy: mike what kind of cnc project are you gonna start?
Mar 20, 2015 4:40 AM - Mike Glass: Dave Gantons I think, he does his all from wood.
Mar 20, 2015 4:40 AM - Mike Glass: with metal edging
Mar 20, 2015 4:41 AM - toy: wood router?
Mar 20, 2015 4:41 AM - Mike Glass: And metal
Mar 20, 2015 4:41 AM - toy: steel?
Mar 20, 2015 4:42 AM - Mike Glass: not thick steal but I just want for up to 5/8 alum.
Mar 20, 2015 4:42 AM - toy: i contacted ugra.com the other day and asked him how the spindles hold up on steel
Mar 20, 2015 4:43 AM - Mike Glass: are those watercooled ones?
Mar 20, 2015 4:43 AM - toy: he said it wasnt recommended.. but ive seen video of people cutting steel with carbide cutters
Mar 20, 2015 4:43 AM - toy: yeah
Mar 20, 2015 4:44 AM - toy: both air and water
Mar 20, 2015 4:44 AM - toy: ideally to machine metal u want high torque low rpm
Mar 20, 2015 4:46 AM - toy: http://ugracnc.com/CNC-SPINDLES/GMT-Water-Cooled-CNC-Spindle-2.2kW-220V-RJ.html i will be getting this and matching vdc
Mar 20, 2015 4:56 AM - Mike Kelly: i kinda hate 3d printers right now
Mar 20, 2015 4:56 AM - toy: lol
Mar 20, 2015 4:56 AM - toy: did u see my all metal frame robo?
Mar 20, 2015 4:57 AM - toy: .500 aluminum base plate =)
Mar 20, 2015 4:57 AM - Mike Kelly: so you gonna mill me the parts to make a CNC?
Mar 20, 2015 4:58 AM - toy: sure
Mar 20, 2015 4:58 AM - toy: im still about 2 months out from completion
Mar 20, 2015 5:01 AM - Mike Kelly: know of a CNC mill design i can make from a CNC plasma?
Mar 20, 2015 5:02 AM - toy: what do u plan on cutting wood/aluminum?
Mar 20, 2015 5:03 AM - Mike Kelly: aluminum
Mar 20, 2015 5:03 AM - toy: do u have a way of surface grinding?
Mar 20, 2015 5:03 AM - toy: or access to one?
Mar 20, 2015 5:04 AM - Mike Glass: Belt sander?
Mar 20, 2015 5:04 AM - toy: noooooo
Mar 20, 2015 5:04 AM - toy: much bigger
Mar 20, 2015 5:04 AM - Mike Glass: we have a 48" one
Mar 20, 2015 5:04 AM - toy: surface ginder machine for machining steel plates to under .001"?
Mar 20, 2015 5:05 AM - toy: if not, u might have to got he 8020 route
Mar 20, 2015 5:06 AM - toy: the plasma cutter would be good for cutting the gentry support sides
Mar 20, 2015 5:06 AM - toy: u got to decide if u want a fixed gentry with moving bed ( like robo) or fixed bed with moving gentry
Mar 20, 2015 5:07 AM - Mike Kelly: i can throw it on a mill yes
Mar 20, 2015 5:07 AM - Mike Kelly: i'd prefer fixed bed
Mar 20, 2015 5:07 AM - toy: im going fixed gentry movable bed.... but takes up more floor space
Mar 20, 2015 5:09 AM - Mike Kelly: http://diy3dprinting.blogspot.com/2015/03/how-to-build-cheapest-dlp-sla-3d.html
Mar 20, 2015 5:09 AM - toy: what you should do is decide how big of a workspace u want
Mar 20, 2015 5:10 AM - Mike Kelly: 2'x2'
Mar 20, 2015 5:10 AM - toy: z travel?
Mar 20, 2015 5:10 AM - toy: do plan on putting a 4th axis down the road?
Mar 20, 2015 5:11 AM - Mike Kelly: i dunno, 8" on Z?
Mar 20, 2015 5:11 AM - Mike Kelly: and probably not for 4th
Mar 20, 2015 5:12 AM - toy: your gonna need some of these http://www.ebay.com/itm/Linear-Bear...718?pt=LH_DefaultDomain_0&hash=item2ecb882c5e
Mar 20, 2015 5:13 AM - toy: maybe not that long.... depends if thwe gentry is moving or fixed
Mar 20, 2015 5:13 AM - Mike Kelly: very nice
Mar 20, 2015 5:13 AM - toy: i got all my parts from this guy
Mar 20, 2015 5:14 AM - toy: he was asking 1500 for all the stuff i got and i talked him down to 1k with free shipping
Mar 20, 2015 5:14 AM - toy: u could probably pick out the pieces u need from his ebay store and make an offer
Mar 20, 2015 5:15 AM - Mike Kelly: i'm just not sure there's a design out there that doesn't use 8020
Mar 20, 2015 5:16 AM - toy: i have a good friend that has a mult-million $ mold base company, so i gonna get my frame cnc with all the correwct hole spacing and surface grinding
Mar 20, 2015 5:17 AM - toy: but 8020 will work fine just a little $$$
Mar 20, 2015 5:17 AM - Mike Kelly: yeah i just have access to a cnc plasma so cutting parts is no problem
Mar 20, 2015 5:17 AM - Mike Kelly: and shitloads of welders
Mar 20, 2015 5:18 AM - toy: u can try to make the frame out of steel, but welding stuff together without warping can be challenging
Mar 20, 2015 5:18 AM - Mike Kelly: agreed

 

Mar 20, 2015 5:18 AM - toy: let me show u my cad model for my cnc
Mar 20, 2015 5:19 AM - Mike Kelly: i don't have strong plans, just curious what's out there
Mar 20, 2015 5:19 AM - Mike Glass: weld alum, its works just fine for a frame
Mar 20, 2015 5:19 AM - Mike Kelly: ugh i do not feeel like working, i might just take the afternoon off
Mar 20, 2015 5:20 AM - Mike Glass: dude they day is almost done..lol
Mar 20, 2015 5:20 AM - toy: http://imgur.com/N2FC4ON
Mar 20, 2015 5:20 AM - toy: no welding involved just a crap load of bolts
Mar 20, 2015 5:21 AM - Mike Kelly: i just got back from lunch
Mar 20, 2015 5:22 AM - toy: but i plan on having my friend machine those plates and then i will just bolt the crap out of it
Mar 20, 2015 5:23 AM - Mike Kelly: ah
Mar 20, 2015 5:23 AM - toy: plan on spending at least 2k
Mar 20, 2015 5:24 AM - toy: he can surface grind those plates to .0002" per foot
Mar 20, 2015 5:24 AM - Mike Kelly: jesus
Mar 20, 2015 5:24 AM - Mike Kelly: that's super high precision
Mar 20, 2015 5:25 AM - toy: yeah =)
Mar 20, 2015 5:27 AM - toy: http://www.romanblack.com/cnc_good.htm
Mar 20, 2015 5:28 AM - toy: http://www.cncroutersource.com/do-it-yourself-CNC-router.html design considerations for a moving gentry
Mar 20, 2015 5:31 AM - Mike Glass: this is crazy.
Mar 20, 2015 5:31 AM - toy: i would still design it to accommodate a 4th axis
Mar 20, 2015 5:33 AM - toy:
Mar 20, 2015 5:35 AM - toy: that wood cnc is cool, i think it uses rack and pinion for motion
Mar 20, 2015 6:15 AM - Ben R: got all my parts for dual extruding... forgot to actually get connectors. I could cobble.. but I'll wait for the proper header connectors
Mar 20, 2015 6:16 AM - Ben R: what are the connectors for the heater pack called?
Mar 20, 2015 6:18 AM - Ben R: nm
Mar 20, 2015 6:50 AM - jbigler1986: Which dual did you get?
Mar 20, 2015 6:56 AM - Mike Kelly: the stock heater uses JST waterproof connectors
Mar 20, 2015 6:57 AM - Mike Kelly: i think he's doing a dual v6 or maybe v5
Mar 20, 2015 7:33 AM - jbigler1986: Finally off work. What a day. Beer time
Mar 20, 2015 7:34 AM - jbigler1986: Is makerbot filament any good
Mar 20, 2015 7:41 AM - Mike Kelly: Eh
Mar 20, 2015 7:41 AM - Mike Kelly: Not for what they charge
Mar 20, 2015 7:53 AM - jbigler1986: Question for you. Is there a way to scale a stl to a certain size? or is it just percentages?
Mar 20, 2015 7:56 AM - jbigler1986: Nevermind. Netfabb you can
Mar 20, 2015 7:57 AM - Ben R: yea... mine doesn't use a JST waterproof. Not according to the pictures. I just bought 2 e3d v6
Mar 20, 2015 7:58 AM - Ben R: this is the connector I have
Mar 20, 2015 7:58 AM - Ben R: so.. round here.. radio shack filament is going on sale for 10 dollars per kg
Mar 20, 2015 7:59 AM - Ben R: tomorrow I hear. and my source has been right so far. He just picked up their display afina printer for $500
Mar 20, 2015 7:59 AM - Ben R: with the display case.. so he has an enclosure already
Mar 20, 2015 8:03 AM - Ben R: Makerbot is good filament. guy at work uses it almost exclusively. Its not cheap, but his prints are the best I've ever seen out of anything.
Mar 20, 2015 8:03 AM - Ben R: His printrbot is well tuned though.. Almost entirely stock, but tuned like you wouldn't believe
Mar 20, 2015 8:06 AM - Mike Kelly: the radio shack near me didn't have any 3d printing stuff
Mar 20, 2015 8:07 AM - Mike Kelly: ben, the picture you linked is a jst waterproof connector
Mar 20, 2015 8:08 AM - Ben R: not according to the description.. but .. we're on the same page
Mar 20, 2015 8:08 AM - Ben R: according to their web
Mar 20, 2015 8:09 AM - Mike Kelly: they're also called SM
Mar 20, 2015 8:09 AM - Ben R: those are the waterproofs.. like.. you know.. tail light connectors. I think I'll just wire it straight to the power
Mar 20, 2015 8:09 AM - Mike Kelly: http://www.amazon.com/10Pairs-13cm-...2949&sr=8-2&keywords=waterproof+jst+connector
Mar 20, 2015 8:10 AM - Ben R: well.. they ain't waterproof
Mar 20, 2015 8:10 AM - Ben R: I had to order a bunch of those header plugs to avoid splicing
Mar 20, 2015 8:11 AM - Mike Kelly: i don't care, that's what the search results show up as
Mar 20, 2015 8:11 AM - Mike Kelly: http://www.ebay.com/itm/US-SELLER-5...967?pt=LH_DefaultDomain_0&hash=item234984043f
Mar 20, 2015 8:11 AM - Ben R: was going to make a wire loom/ribbon cable to just make the whole printer head removable. BUT.. nah.
Mar 20, 2015 8:11 AM - Mike Kelly: and when someone asks that finds them the answer
Mar 20, 2015 8:12 AM - Ben R: how is it waterproof?
Mar 20, 2015 8:12 AM - Mike Kelly: i don't care
Mar 20, 2015 8:12 AM - Mike Kelly: that's just the search key
Mar 20, 2015 8:12 AM - jbigler1986: RadioShack around me are all wiped of literally any inventory of anything. Bankruptcy
Mar 20, 2015 8:13 AM - Ben R: yea.. they're not bankrubt they're closing
Mar 20, 2015 8:13 AM - Ben R: they were bought by .. I dunno.. virgin or google or t mob or something
Mar 20, 2015 8:13 AM - Mike Kelly: they're bankrupt, not closing
Mar 20, 2015 8:13 AM - Mike Kelly: some stores are staying open
Mar 20, 2015 8:14 AM - jbigler1986: They are filing bankruptcy
Mar 20, 2015 8:14 AM - Mike Kelly: chapter 11
Mar 20, 2015 8:14 AM - Bob64: wonder what the AMP/volt limit is on those connectors
Mar 20, 2015 8:14 AM - Ben R: strange as they are spring now.. I don't know I'm not a business lawyer
Mar 20, 2015 8:14 AM - Ben R: sprint
Mar 20, 2015 8:15 AM - jbigler1986: They need to go back to their roots.
Mar 20, 2015 8:15 AM - Mike Kelly: bob i think it's like 3A
Mar 20, 2015 8:15 AM - Ben R: too late
Mar 20, 2015 8:15 AM - Ben R: amazon took it
Mar 20, 2015 8:15 AM - Ben R: and I can't remember the last time I needed a vacuum tube
Mar 20, 2015 8:16 AM - jbigler1986: I mean more components. Only time I ever went there was to get resistors and stuff
Mar 20, 2015 8:16 AM - Mike Kelly: https://fbcdn-sphotos-e-a.akamaihd...._=1434189319_55bad54afa209092d234886af1d5f9e4 lol
Mar 20, 2015 8:16 AM - jbigler1986: But yeah amazon has hurt a lot of businesses
Mar 20, 2015 8:16 AM - Ben R: yea.. now a days, I just find what I need on amazon and have it tomorrow instead of braving the mall
Mar 20, 2015 8:17 AM - Mike Kelly: their prices were too high
Mar 20, 2015 8:17 AM - Mike Kelly: can't beat internet with a B&M
Mar 20, 2015 8:17 AM - Mike Kelly: i say good riddance
Mar 20, 2015 8:18 AM - jbigler1986: True that. Turn them into a 3d printing store
Mar 20, 2015 8:18 AM - Ben R: B&M didn't have all the adaptors/y splitters etc ready at a moments notice. But.. radio shack kind of pushed themselves in between markets. stopped selling radio shack stuff
Mar 20, 2015 8:18 AM - Ben R: they're a sprint phone store now
Mar 20, 2015 8:18 AM - Ben R: closing most stores and I think tweaking the name
Mar 20, 2015 8:18 AM - Mike Kelly: man i didn't spend that long outside but i'm whooped
Mar 20, 2015 8:18 AM - Mike Kelly: all that vitamin B
Mar 20, 2015 8:18 AM - jbigler1986: Yeah way to many phones and cases
Mar 20, 2015 8:18 AM - Mike Kelly: or D
Mar 20, 2015 8:18 AM - Mike Kelly: or whichever of the many vitamins
Mar 20, 2015 8:19 AM - Mike Kelly: well you know a cell phone is a radio...
Mar 20, 2015 8:19 AM - Ben R: yea .. My vitamin D is at 50% "good" dr says its pretty much normal now a days
Mar 20, 2015 8:19 AM - Ben R: actually cell phone is usually several radios
Mar 20, 2015 8:19 AM - Ben R: they must have tiny tiny tubes in them
Mar 20, 2015 8:20 AM - jbigler1986: Damn demand. Baffles me how phones are double the price of bigger tablets. Minus a few components
Mar 20, 2015 8:23 AM - Ben R: really? Processor for processor? I've noticed a fair decent parallel... minus the radios. The cheap part is the screen and battery... expensive part is the royalties
Mar 20, 2015 8:41 AM - Mike Glass: Cell phones have fm radio's in them also
Mar 20, 2015 8:49 AM - Mike Glass: Does it take an act of god to get robo to send decent replacement parts?
Mar 20, 2015 8:56 AM - Bob64: considering what happened to the phoenix kickstarter, robo is probably hit-hard in terms of $
Mar 20, 2015 9:02 AM - jbigler1986: What did they say when you told them that the rods they sent were screwed
Mar 20, 2015 9:02 AM - Mike Glass: not a thing, just sent out new ones, well shittier ones.
Mar 20, 2015 9:03 AM - Mike Glass: The are just as worthless as the last ones I got.
Mar 20, 2015 9:04 AM - Mike Glass: They have grooves and half rusted, just disgusting.

 

Mar 20, 2015 9:05 AM - Mike Glass: I Skyped Jerry, so see what happens.
Mar 20, 2015 9:06 AM - Mike Kelly: I just don't know what's going on with them anymore
Mar 20, 2015 9:07 AM - Mike Glass: http://imgur.com/a4abIbg
Mar 20, 2015 9:07 AM - Mike Glass: one a good note that what I did last night.
Mar 20, 2015 9:11 AM - jbigler1986: That looks good
Mar 20, 2015 9:12 AM - jbigler1986: I'm about to go pickup lights, filament sensor stuff and some red pla
Mar 20, 2015 9:16 AM - Mike Glass: Dont do it.
Mar 20, 2015 9:19 AM - jbigler1986: Don't do what
Mar 20, 2015 9:19 AM - Mike Glass: do go, its time away from your baby..lol
Mar 20, 2015 9:20 AM - Mike Glass: dont go.. gu
Mar 20, 2015 9:20 AM - jbigler1986: Yes, no, no, yes. Maybe
Mar 20, 2015 9:24 AM - Mike Kelly: jb are you going to the festival
Mar 20, 2015 9:25 AM - jbigler1986: Yep
Mar 20, 2015 9:25 AM - jbigler1986: Tomorrow
Mar 20, 2015 9:26 AM - Mike Kelly: sweet
Mar 20, 2015 9:26 AM - Mike Kelly: jealous
Mar 20, 2015 9:28 AM - Mike Glass: ****ole
Mar 20, 2015 9:29 AM - jbigler1986: I'm going to buy everything. No bills to pay this week.
Mar 20, 2015 9:32 AM - jbigler1986: I will see if I can get a few nozzles though
Mar 20, 2015 9:35 AM - Mike Glass: they have them there?
Mar 20, 2015 9:35 AM - jbigler1986: Matt said some people will be selling some stuff
Mar 20, 2015 9:36 AM - Mike Glass: I will sell you some I have two I dont use
Mar 20, 2015 9:36 AM - jbigler1986: Size?
Mar 20, 2015 9:36 AM - Mike Glass: .3,.5
Mar 20, 2015 9:37 AM - jbigler1986: How much
Mar 20, 2015 9:37 AM - Mike Glass: just order the 4 piece I did on amazon only $12
Mar 20, 2015 9:41 AM - Mike Glass: Ok .4 back on, time to get serious
Mar 20, 2015 9:41 AM - jbigler1986: Did you print that with. 8
Mar 20, 2015 9:42 AM - Mike Glass: Yep, everything in the last 2 weeks..
Mar 20, 2015 9:43 AM - Mike Glass: 2:34 it took
Mar 20, 2015 9:44 AM - Mike Glass: holy crap pla is cheap on amazon today
Mar 20, 2015 9:45 AM - jbigler1986: Why does my z drop during prints sometimes
Mar 20, 2015 9:46 AM - Mike Glass: sticky threads?
Mar 20, 2015 9:46 AM - jbigler1986: That's a possibility
Mar 20, 2015 9:47 AM - jbigler1986: Is sewing machine oil good on those too?
Mar 20, 2015 9:51 AM - Bill Monroe: sewing machine oil is best on pasta
Mar 20, 2015 9:52 AM - jbigler1986: I will pass on that
Mar 20, 2015 9:52 AM - Bill Monroe: it helps that too
Mar 20, 2015 9:53 AM - jbigler1986: For real though
Mar 20, 2015 9:54 AM - Bill Monroe: it's fine.. any oil is fine.. it's just a machine thread, no magic
Mar 20, 2015 9:55 AM - jbigler1986: KY
Mar 20, 2015 9:55 AM - Mike Glass: yes, I use ptfe dry lube on mine
Mar 20, 2015 9:56 AM - Mike Glass: Machine oil is pretty thin so you have to watch out so it doesnt get down to the HC and make them slip.
Mar 20, 2015 9:56 AM - Bill Monroe: oh man..
Mar 20, 2015 9:57 AM - Bill Monroe: you dont need to hose it on
Mar 20, 2015 9:58 AM - Bill Monroe: dip a q-tip in it and swab on a couple of swipes.. run the z and an down a few times.. never have to do it again
Mar 20, 2015 10:00 AM - jbigler1986: Sounds good
Mar 20, 2015 10:01 AM - Mike Glass: take the threaded rods off and dip em in it..lol
Mar 20, 2015 10:05 AM - jbigler1986: I will get a spray bottle and spray that shit everywhere. Including the bed
Mar 20, 2015 10:05 AM - Bill Monroe: I had a girl once who, having no KY, used mayonaise..
Mar 20, 2015 10:06 AM - Mike Glass: JB, are you drinkin again?
Mar 20, 2015 10:06 AM - Bill Monroe: brought a whole new meaning to Best Foods
Mar 20, 2015 10:06 AM - Mike Glass: oil n eggs at the Y
Mar 20, 2015 10:08 AM - jbigler1986: If it was the natural girl mayo I would be ok. But actual mayo is nasty. Lol
Mar 20, 2015 10:08 AM - Mike Glass: JB is probably a Miracle Whipper.
Mar 20, 2015 10:10 AM - jbigler1986: Hell no. That stuff is gross
Mar 20, 2015 10:10 AM - Mike Kelly: i like both
Mar 20, 2015 10:11 AM - jbigler1986: On my way to fry's without the wife. Could be dangerous
Mar 20, 2015 10:11 AM - Mike Kelly: don't come home with a new printer
Mar 20, 2015 10:12 AM - jbigler1986: Nah. Only one I would is up plus
Mar 20, 2015 10:12 AM - Mike Glass: Dont do it
Mar 20, 2015 10:13 AM - Mike Glass: you will miss her.
Mar 20, 2015 10:13 AM - jbigler1986: Software sucks though
Mar 20, 2015 10:14 AM - jbigler1986: Probably the pick up new pi I have older one
Mar 20, 2015 10:18 AM - jbigler1986: What's wrong with this country? Grilled cheese breakfast sandwich. Wtf
Mar 20, 2015 10:19 AM - Mike Kelly: what's wrong with that
Mar 20, 2015 10:21 AM - jbigler1986: Heart attack
Mar 20, 2015 10:22 AM - Mike Kelly: fat is not a 4 letter word
Mar 20, 2015 10:22 AM - Mike Kelly: though dairy has it's own set of issues
Mar 20, 2015 10:26 AM - jbigler1986: Last 30 minutes a store is open they allow you to fill up a cart for a set price right
Mar 20, 2015 10:36 AM - Mike Kelly: uh wut
Mar 20, 2015 10:38 AM - jbigler1986: Kidding
Mar 20, 2015 10:43 AM - jbigler1986: Holy shit this checkout line is long
Mar 20, 2015 10:49 AM - jbigler1986: Anybody printing anything good
Mar 20, 2015 10:53 AM - Mike Glass: 5 hour print for these clips I desgined ..lol I really have .4 nozzle
Mar 20, 2015 11:25 AM - jbigler1986: What r u going to use them for
Mar 20, 2015 11:31 AM - Mike Kelly: my printer is out till i fix my wiring
Mar 20, 2015 11:50 AM - Mike Glass: they are for the 3d stop sign and the wall rack I built
Mar 20, 2015 11:58 AM - jbigler1986: Nice
Mar 20, 2015 11:59 AM - jbigler1986: Got the lights hooked up
Mar 20, 2015 12:00 PM - jbigler1986: http://www.ustream.tv/channel/jbigler1986
Mar 20, 2015 12:04 PM - Mike Glass: im blinded
Mar 20, 2015 12:05 PM - jbigler1986: lol
Mar 20, 2015 12:05 PM - Mike Glass: how long are they?
Mar 20, 2015 12:06 PM - jbigler1986: 2 feet total
Mar 20, 2015 12:06 PM - jbigler1986: not close to your 16 feet. lol
Mar 20, 2015 12:08 PM - Mike Glass: are you gonna disconnect the blue ones?
Mar 20, 2015 12:09 PM - jbigler1986: yeah. need to trace the wires
Mar 20, 2015 12:10 PM - jbigler1986: can actually see what it's printing. It's a miracle
Mar 20, 2015 12:11 PM - jbigler1986: Makernot filament was like $50 for 1KG. No thanks
Mar 20, 2015 12:12 PM - Mike Glass: hatchbox is now 21.98 on amazon.
Mar 20, 2015 12:12 PM - jbigler1986: ????????? Hell yes.
Mar 20, 2015 12:12 PM - Mike Glass: I paid like 26 last time
Mar 20, 2015 12:12 PM - jbigler1986: I'm ordering some now. I need red and some more white
Mar 20, 2015 12:13 PM - Mike Glass: yep me too.
Mar 20, 2015 12:13 PM - jbigler1986: I have literally every other color. Besides glow in the dark
Mar 20, 2015 12:14 PM - jbigler1986: Just bought yellow
Mar 20, 2015 12:14 PM - jbigler1986: I need to make a quick and easy case to print abs
Mar 20, 2015 12:15 PM - jbigler1986: How much do you think just a big enough acrylic box would cost
Mar 20, 2015 12:17 PM - Mike Glass: glow hatchbox was like16

 

Mar 20, 2015 12:19 PM - Mike Glass: why do you want abs?
Mar 20, 2015 12:19 PM - jbigler1986: Easier to sand. I wouldn't use it very often
Mar 20, 2015 12:20 PM - jbigler1986: I have 3 spools right now. Red, white, blue
Mar 20, 2015 12:21 PM - Mike Glass: xt sands really nice
Mar 20, 2015 12:21 PM - Mike Glass: does your abs stink bad?
Mar 20, 2015 12:21 PM - jbigler1986: What causes little buggers on layers? Heat, to low?
Mar 20, 2015 12:22 PM - jbigler1986: let me upload a pic
Mar 20, 2015 12:22 PM - Mike Glass: overextrusion?
Mar 20, 2015 12:22 PM - Mike Glass: Thats what my xt does, have to change it to 85% flow
Mar 20, 2015 12:23 PM - jbigler1986: http://imgur.com/kY3LUDK
Mar 20, 2015 12:25 PM - TechSupportGo: hello
Mar 20, 2015 12:25 PM - jbigler1986: hi
Mar 20, 2015 12:25 PM - Mike Glass: hey tech
Mar 20, 2015 12:26 PM - Mike Glass: is that the first layer.
Mar 20, 2015 12:26 PM - jbigler1986: yeah
Mar 20, 2015 12:26 PM - Mike Glass: to low, overextrusion, your drunk..lol
Mar 20, 2015 12:27 PM - jbigler1986: I wish
Mar 20, 2015 12:27 PM - jbigler1986: I drink like once a month
Mar 20, 2015 12:27 PM - jbigler1986: Besides out to dinner. I will usually have one or 2 then
Mar 20, 2015 12:27 PM - Mike Glass: I have a beer a two couple times a week
Mar 20, 2015 12:28 PM - jbigler1986: I can buy a 6 pack and it will literally sit in my fridge for like 2 months
Mar 20, 2015 12:29 PM - jbigler1986: x axis sounds so much smoother now
Mar 20, 2015 12:32 PM - Mike Glass: did ya oil it
Mar 20, 2015 12:32 PM - jbigler1986: yep
Mar 20, 2015 12:32 PM - jbigler1986: Got em all
Mar 20, 2015 12:33 PM - Mike Glass: mine still sqeaks a little when it gets to the top.
Mar 20, 2015 12:34 PM - TechSupportGo: the robo facebook page liked my printed dragon head!
Mar 20, 2015 12:36 PM - jbigler1986: Cool. It looked good
Mar 20, 2015 12:37 PM - TechSupportGo: https://www.facebook.com/jessie.sasser.1/posts/10204791991897211?notif_t=like
Mar 20, 2015 12:38 PM - Mike Glass: I dont see it their page
Mar 20, 2015 12:39 PM - TechSupportGo: I see your little printer!!
Mar 20, 2015 12:39 PM - Mike Glass: I see they retweeted the bowl I made, on twitter
Mar 20, 2015 12:40 PM - Mike Glass: I need to do that dragon, that is cool
Mar 20, 2015 12:43 PM - TechSupportGo: I see the like, I am not sure why it didnt show up?
Mar 20, 2015 12:46 PM - Mike Glass: I see it just have to click in.
Mar 20, 2015 12:54 PM - jbigler1986: Hmm
Mar 20, 2015 12:55 PM - TechSupportGo: goodnight fellas. =)
Mar 20, 2015 12:58 PM - Mike Glass: night Tech
Mar 20, 2015 12:58 PM - Mike Glass: Ugg forgot to add support for these..hopefully they will bridge fine.
Mar 20, 2015 1:05 PM - jbigler1986: woops
Mar 20, 2015 1:05 PM - jbigler1986: hopefully
Mar 20, 2015 1:08 PM - Mike Glass: its looking up
Mar 20, 2015 1:08 PM - Mike Glass: now what colors should I get
Mar 20, 2015 1:08 PM - Mike Glass: yellow
Mar 20, 2015 1:12 PM - jbigler1986: Yeah.
Mar 20, 2015 1:12 PM - jbigler1986: Get gold. It looks really good
Mar 20, 2015 1:13 PM - insomniac_lemon: Ugh, still don't know what I want to do for dual spool holders
Mar 20, 2015 1:14 PM - insomniac_lemon: So still not installed the Cyclops, but now I do have Cherry MX switches to test, so I'm printing off a keycap I just designed
Mar 20, 2015 1:14 PM - insomniac_lemon: I don't think it's going to work, though. Too small of features for the hex and Cura going so fast
Mar 20, 2015 1:15 PM - Mike Glass: need a smaller nozzle
Mar 20, 2015 1:15 PM - insomniac_lemon: Yeah, but this is just a test, anyways
Mar 20, 2015 1:16 PM - insomniac_lemon: I'm going to be using the Cyclops on the final keys (dual color) and it has a smaller nozzle, anyways
Mar 20, 2015 1:16 PM - insomniac_lemon: It might work. It just looks a little sloppy so far.
Mar 20, 2015 1:17 PM - Mike Glass: abs?
Mar 20, 2015 1:17 PM - insomniac_lemon: Especially the beginning was sort of a "WHY WOULD YOU DO THAT" sort of thing
Mar 20, 2015 1:17 PM - insomniac_lemon: No, still PLA ;P
Mar 20, 2015 1:18 PM - insomniac_lemon: I only have red and glowy ABS, not really good for a keyboard, anyways
Mar 20, 2015 1:19 PM - insomniac_lemon: Why does the member list for chat re-arrange every second?
Mar 20, 2015 1:19 PM - Mike Glass: its so annoying
Mar 20, 2015 1:20 PM - insomniac_lemon: Well, my prints turn out much uglier, but Cura is fast, I'll give it that.
Mar 20, 2015 1:22 PM - Mike Glass: cura is too fast most of the time, slicer is slow, but works
Mar 20, 2015 1:25 PM - insomniac_lemon: Yeah. Too bad there's no middleground, haha. Slic3r felt slow even when speeding it up (but had minimal ribbing sort of effects), Cura is too fast even turning it down.
Mar 20, 2015 1:25 PM - insomniac_lemon: And still has ribbing effects.
Mar 20, 2015 1:25 PM - jbigler1986: offset is at .6
Mar 20, 2015 1:26 PM - jbigler1986: .65 or .55 to raise it
Mar 20, 2015 1:26 PM - insomniac_lemon: I wish there was some sort of dynamic speed option where it would know the proper speed/acceleration to use for smaller models/features
Mar 20, 2015 1:29 PM - insomniac_lemon: Who are you talking to jbigler?
Mar 20, 2015 1:29 PM - jbigler1986: either
Mar 20, 2015 1:29 PM - jbigler1986: i did .55
Mar 20, 2015 1:31 PM - insomniac_lemon: If you're talking about stopping from sticking to painter's tape, it really depends on first layer height, temp, AND speed.... the print I just did barely stuck at .35mm offset and 0.4mm first layer height
Mar 20, 2015 1:31 PM - insomniac_lemon: oh.... AND size of your print.... one model might stick and another might not at the same settings
Mar 20, 2015 1:31 PM - Mike Glass: .65 to raise
Mar 20, 2015 1:35 PM - jbigler1986: k
Mar 20, 2015 1:41 PM - insomniac_lemon: I can't believe neither Slic3r nor Cura have elephant foot compensation....
Mar 20, 2015 1:45 PM - insomniac_lemon: The key seemed like it was overall too small, so I increased the size and height to see if that would help
Mar 20, 2015 1:53 PM - jbigler1986: I'm calling it a night. Goodnight and happy printing
Mar 20, 2015 1:56 PM - Mike Glass: night JB
Mar 20, 2015 1:58 PM - Mike Glass: use chamfer it will get rid of elephant foot, course only with your designs not with stl's.
Mar 20, 2015 2:01 PM - insomniac_lemon: I know.... that's also an imprecise and impractical solution (will differ with layer height and nozzle size) when the slicer obviously could undersize JUST the base layer so the smoosh turns out perfect size
Mar 20, 2015 2:26 PM - insomniac_lemon: For some reason, it turned out worse.... It's bigger, but the stem is more smoothed together than before
Mar 20, 2015 3:34 PM - insomniac_lemon: I'm starting to think Cura is stupid. I keep making the stem hole bigger each time (this time I made the stem square thinking it would be better) and it's looks the smallest it has been

 

Mar 20, 2015 at 10:29 PM - jbigler1986: Good morning robo enthusiasts
Mar 20, 2015 at 10:30 PM - Mike Glass: hey JB
Mar 20, 2015 at 10:32 PM - Mike Glass: when you heading out?
Mar 20, 2015 at 10:33 PM - jbigler1986: Question for ya
Mar 20, 2015 at 10:33 PM - Mike Glass: ya
Mar 20, 2015 at 10:34 PM - jbigler1986: I just did the esteps test. It's good. Printed a 10mm test cube. It's 10.13 all around
Mar 20, 2015 at 10:34 PM - jbigler1986: Is that acceptable or do I need to change something else
Mar 20, 2015 at 10:35 PM - Mike Glass: you could im sure mess with extrusion, but thats really close anyways.
Mar 20, 2015 at 10:36 PM - jbigler1986: That's what I thought. I will leave it be
Mar 20, 2015 at 10:37 PM - Mike Glass: unless your replicating a piece to fit something, it would probably still work
Mar 20, 2015 at 10:38 PM - jbigler1986: Glad it's equal all the way around
Mar 20, 2015 at 10:38 PM - jbigler1986: I'm leaving in like an hour
Mar 20, 2015 at 10:39 PM - Mike Glass: thats the easy one, the height is the tricky one I think
Mar 20, 2015 at 10:41 PM - jbigler1986: Is there a flow rate in slic3r? I know there is in cura
Mar 20, 2015 at 10:41 PM - jbigler1986: Might slow it down a bit
Mar 20, 2015 at 10:42 PM - Mike Glass: yea in the filament section
Mar 20, 2015 at 10:43 PM - Mike Glass: they call it extrusion multiplier
Mar 20, 2015 at 11:05 PM - jbigler1986: Got it thanks
Mar 20, 2015 at 11:06 PM - jbigler1986: Is there a print one at a time setting in slic3r. Or is that a cura only thing
Mar 20, 2015 at 11:06 PM - Mike Glass: so are you driving back today also.
Mar 20, 2015 at 11:06 PM - Mike Glass: yes you can do one at a time
Mar 20, 2015 at 11:08 PM - Mike Glass: output optins under print settings
Mar 20, 2015 at 11:11 PM - jbigler1986: Yeah driving back today too. It's not that far
Mar 20, 2015 at 11:15 PM - Mike Glass: man that would be so fun
Mar 20, 2015 at 11:15 PM - Mike Glass: take lots of pics
Mar 21, 2015 at 12:59 AM - dbvanhorn: Hi all
Mar 21, 2015 at 1:02 AM - dbvanhorn: Should I worry about a slight "tick" when the extruder gears move back? I am seeing some stringing, and I suspect it's related.
Mar 21, 2015 at 1:13 AM - Mike Kelly: is it the clicking of the gear?
Mar 21, 2015 at 1:14 AM - dbvanhorn: I think so, very slight slack there.
Mar 21, 2015 at 1:14 AM - Mike Glass: I believe that is normal
Mar 21, 2015 at 1:15 AM - dbvanhorn: It didn't do it when new. I haven't tried to adjust yet.
Mar 21, 2015 at 1:15 AM - Mike Glass: mine does it it has a slight slack in it.
Mar 21, 2015 at 1:16 AM - Mike Glass: could you get a video of it?
Mar 21, 2015 at 1:16 AM - dbvanhorn: Having great success otherwise. My dims are pretty good, I printed a test fixture for work at 100 x 50 mm and the result was 100.14 by 50.06
Mar 21, 2015 at 1:17 AM - dbvanhorn: I don't have a webcam
Mar 21, 2015 at 1:17 AM - Mike Glass: phone?
Mar 21, 2015 at 1:17 AM - dbvanhorn: I would estimate 1-2 mils slop.
Mar 21, 2015 at 1:18 AM - Mike Glass: haha not take vid with your phone..
Mar 21, 2015 at 1:18 AM - dbvanhorn: Oh.. Insufficient caffiene error.
Mar 21, 2015 at 1:19 AM - dbvanhorn: I can try later, the print it's on has almost no places where it will retract.
Mar 21, 2015 at 1:19 AM - Mike Glass: what do you have your retraction set at?
Mar 21, 2015 at 1:19 AM - Mike Kelly: I suggest printing herringbone gear replacements
Mar 21, 2015 at 1:20 AM - dbvanhorn: I don't always replace my extrusion gears, but when I do, it's herringbone!
Mar 21, 2015 at 1:21 AM - dbvanhorn: Retraction 3mm on move, speed 30mm/s Z lift 2mm minimum travel 5mm min ext requiring retraction 0
Mar 21, 2015 at 1:24 AM - Mike Glass: why so much on z lift?
Mar 21, 2015 at 1:25 AM - Mike Glass: Hey Mike
Mar 21, 2015 at 1:25 AM - dbvanhorn: I suppose it could be less, but no harm right?
Mar 21, 2015 at 1:26 AM - Mike Glass: some say dont us it at all, guess it depends on the part.
Mar 21, 2015 at 1:26 AM - Mike Kelly: hey mike
Mar 21, 2015 at 1:26 AM - Mike Glass: hay mike
Mar 21, 2015 at 1:26 AM - Mike Kelly: z hop adds a lot of print time
Mar 21, 2015 at 1:27 AM - dbvanhorn: I thought I was seeing the head drag across the surface on some prints.
Mar 21, 2015 at 1:27 AM - TechSupportGo: hey mike
Mar 21, 2015 at 1:27 AM - dbvanhorn: Not too concerned about speed. (yet)
Mar 21, 2015 at 1:27 AM - Mike Kelly: sup everyone
Mar 21, 2015 at 1:27 AM - Mike Glass: question for yaz Mike, if I get lcd and do sd printing can I manually controll the speed of a print?
Mar 21, 2015 at 1:29 AM - Mike Kelly: yes
Mar 21, 2015 at 1:29 AM - Mike Kelly: you can even adjust acceleration and jerk or whatever
Mar 21, 2015 at 1:29 AM - Mike Glass: and control fans I assume.
Mar 21, 2015 at 1:29 AM - Mike Kelly: yup yup
Mar 21, 2015 at 1:30 AM - Mike Glass: coolness, I need one then, intermintent crashes on my laptop make me angry, HULK SMASH
Mar 21, 2015 at 1:31 AM - Mike Kelly: yeah it's a very worthwhile upgrade
Mar 21, 2015 at 1:32 AM - dbvanhorn: Interesting What LCD panel would you recommend Mike? I have seen a few.
Mar 21, 2015 at 1:33 AM - Mike Kelly: if you're up to some firmware modding and research, the graphics LCD is very nice
Mar 21, 2015 at 1:33 AM - Mike Kelly: though the XXL is plug and play
Mar 21, 2015 at 1:33 AM - Mike Kelly: ziggy's done some really cool mods for the graphics
Mar 21, 2015 at 1:37 AM - dbvanhorn: Haven't even looked at what it takes to disasseemble that far yet. Having too much fun printing cool stuff.
Mar 21, 2015 at 1:37 AM - Mike Glass: or the new awesome MC panel..hahaha
Mar 21, 2015 at 1:37 AM - dbvanhorn: ?
Mar 21, 2015 at 1:39 AM - Mike Kelly: i think he's being sarcastic
Mar 21, 2015 at 1:40 AM - Mike Kelly: it's pretty easy to install the lcd, just gotta pop off the bottom cover
Mar 21, 2015 at 1:40 AM - Les Hall: hi!
Mar 21, 2015 at 1:40 AM - Les Hall: long time no see
Mar 21, 2015 at 1:41 AM - Les Hall: i have some interesting news
Mar 21, 2015 at 1:41 AM - Les Hall: i have created a game
Mar 21, 2015 at 1:42 AM - Les Hall: and i would like to promote it by giving away my robo3d printer (once it's repaired)
Mar 21, 2015 at 1:49 AM - Mike Glass: what kind of game?
Mar 21, 2015 at 1:51 AM - dbvanhorn: Need sarcasm font.
Mar 21, 2015 at 1:51 AM - dbvanhorn: Game: do tell!
Mar 21, 2015 at 1:53 AM - Les Hall: the game is called circuit wars
Mar 21, 2015 at 1:53 AM - Les Hall: it is a turn-based game with real time elements
Mar 21, 2015 at 1:54 AM - Les Hall: opponents begin with a set of unprogrammed processor chips and circuit elements
Mar 21, 2015 at 1:55 AM - Les Hall: then they proceed to place these components on a circuit board until one of them is declared a winner
Mar 21, 2015 at 1:56 AM - Les Hall: generally speaking you attempt to destroy the chips with inductor spikes and the like, though fancy stuff like cryptography and reverse engineering may help too
Mar 21, 2015 at 2:01 AM - dbvanhorn: Interesting. A bit geeky, but I am exactly that kind of geek. Embedded systems hardware/software since 83.
Mar 21, 2015 at 2:01 AM - jbigler1986: What size of acrylic sheets do I need to make the case
Mar 21, 2015 at 2:01 AM - Les Hall: cool
Mar 21, 2015 at 2:05 AM - Mike Glass: 4x8
Mar 21, 2015 at 2:05 AM - Mike Glass: jb look at thingiverse
Mar 21, 2015 at 2:06 AM - Mike Glass: guess it doesnt tell ya
Mar 21, 2015 at 2:07 AM - jbigler1986: So just one sheet should be good enough?
Mar 21, 2015 at 2:08 AM - Mike Glass: I think half sheet would work, but they really dont have a size listed
Mar 21, 2015 at 2:09 AM - jbigler1986: I will pick that up on my way home
Mar 21, 2015 at 2:10 AM - Mike Glass: there is a pdf it should list the size.hold on
Mar 21, 2015 at 2:11 AM - Les Hall: did mike kelley go to lunch?
Mar 21, 2015 at 2:17 AM - Mike Glass: at 11am
Mar 21, 2015 at 2:20 AM - Les Hall: ok i'll catch him later then
Mar 21, 2015 at 2:22 AM - dbvanhorn: Les: Where can I see this game?
Mar 21, 2015 at 2:27 AM - Quest: I'd like to know more about the game as well
Mar 21, 2015 at 2:36 AM - Les Hall: oh i'm back

 

Mar 21, 2015 at 2:36 AM - Les Hall: more about the game, sure
Mar 21, 2015 at 2:36 AM - Les Hall: i'm kind of developing the rules as we go
Mar 21, 2015 at 2:36 AM - Les Hall: so far it is like Core War, only it is played on a breadboard made for circuits
Mar 21, 2015 at 2:37 AM - Les Hall: you get a box of parts and use a chess timer to limit the duration of the game and add time pressure
Mar 21, 2015 at 2:37 AM - Les Hall: you may program a chip in one step or change a component or put down a new component any given step
Mar 21, 2015 at 2:38 AM - Les Hall: you may turn power on early or late
Mar 21, 2015 at 2:38 AM - Les Hall: your goal is to destroy or reset-lock the opponent's processor(s)
Mar 21, 2015 at 2:39 AM - Les Hall: right now the game is located on hackaday as a project of mine
Mar 21, 2015 at 2:40 AM - Les Hall: here is the link: https://hackaday.io/project/4858-circuit-wars
Mar 21, 2015 at 2:41 AM - Mike Glass: JB .236" or .25" thick is what you want and you wont need more than a half sheet.
Mar 21, 2015 at 2:42 AM - TechSupportGo: my friends 50 thousand dollar car got stolen in front of his house last night
Mar 21, 2015 at 2:44 AM - Mike Glass: again?
Mar 21, 2015 at 2:44 AM - Mike Glass: tell his drunk ass to stop leaving the keys in it..lol
Mar 21, 2015 at 2:45 AM - TechSupportGo: first time.. It is a 2015 camero ss with 480 HP engine. The cops just left his house.
Mar 21, 2015 at 2:46 AM - TechSupportGo: BTW did you guys see my new car, its FAST
Mar 21, 2015 at 2:47 AM - Mike Glass: Hyundai Veloster?
Mar 21, 2015 at 2:47 AM - Quest: Les, I'll look into that game. I think a friend of mine might be interested in it as well.
Mar 21, 2015 at 3:00 AM - TechSupportGo: my xbox live name is DeathAdvice if anyone wants to help me rob this bank
Mar 21, 2015 at 3:03 AM - Mike Kelly: Who leaves a 50k car parked outside
Mar 21, 2015 at 3:04 AM - Mike Kelly: What kinda case is jb making. Also why isn't he at the festival
Mar 21, 2015 at 3:05 AM - Mike Kelly: I'm doing yard work today so I'll be in and out
Mar 21, 2015 at 3:09 AM - Mike Glass: he is but he wants to make your case Mike
Mar 21, 2015 at 3:12 AM - Mike Kelly: ah
Mar 21, 2015 at 3:13 AM - Mike Kelly: he has access to a laser cutter?
Mar 21, 2015 at 3:15 AM - Mike Kelly: anyone out there have a pond/waterfall
Mar 21, 2015 at 3:22 AM - Mike Kelly: i think you can fit everything on a 2x4 sheet
Mar 21, 2015 at 3:35 AM - Mike Glass: THats what I was wondering if my math was right.
Mar 21, 2015 at 6:16 AM - Stephen Capistron: I made a couple waterfalls and such back in the good old days
Mar 21, 2015 at 6:24 AM - Mike Kelly: I just have no idea if it's worth cleaning these rocks or buying new ones
Mar 21, 2015 at 6:37 AM - Mike Glass: a 6 hour print using xt and the ****er warps.. have I told you I hate xt lately.
Mar 21, 2015 at 6:51 AM - TechSupportGo: Mike Kelly's rock garden
Mar 21, 2015 at 6:52 AM - TechSupportGo: title of your next post lol
Mar 21, 2015 at 8:51 AM - Ben R: I have HAD a waterfall back in hawaii. Don't have one here.
Mar 21, 2015 at 9:49 AM - TechSupportGo: hello
Mar 21, 2015 at 9:58 AM - Ben R: hi
Mar 21, 2015 at 10:03 AM - TechSupportGo: I am designing a small soap press to recycle old soap
Mar 21, 2015 at 10:28 AM - Mike Glass: eww
Mar 21, 2015 at 10:35 AM - jbigler1986: Hello. No I didn't go to Reprap. Son broke his figure learning how to ride a bike.
Mar 21, 2015 at 10:36 AM - jbigler1986: Finger
Mar 21, 2015 at 10:36 AM - jbigler1986: So got to deal with that today
Mar 21, 2015 at 10:38 AM - Mike Glass: oh man
Mar 21, 2015 at 10:38 AM - jbigler1986: Can't be mad though. Shit happens
Mar 21, 2015 at 10:39 AM - Mike Glass: yeah, I would of killed to go though
Mar 21, 2015 at 10:40 AM - jbigler1986: And I added up the materials and it came to about $70. So might just order one or just never use abs. Lol
Mar 21, 2015 at 10:40 AM - Mike Glass: poor kid hows he doing
Mar 21, 2015 at 10:40 AM - jbigler1986: Good. He is knocked out
Mar 21, 2015 at 10:41 AM - jbigler1986: Has has had surgery once, stitches under his eye and under his lip. Now a broken finger. Rough start.
Mar 21, 2015 at 10:42 AM - Mike Glass: how old?
Mar 21, 2015 at 10:42 AM - jbigler1986: Just turned 7
Mar 21, 2015 at 10:44 AM - Mike Glass: my boy just turned 6 this month
Mar 21, 2015 at 10:45 AM - jbigler1986: Then I have one about to turn 5.
Mar 21, 2015 at 10:46 AM - Mike Glass: I have a girl turning 4 soon, and a 7 year old.
Mar 21, 2015 at 10:46 AM - Mike Glass: Holy crap battlefield 4 is 23 gb to download.
Mar 21, 2015 at 10:47 AM - jbigler1986: Busy that's for sure
Mar 21, 2015 at 10:47 AM - jbigler1986: Yeah. I like BF4 a lot but it has tons of problems
Mar 21, 2015 at 10:49 AM - Mike Glass: My old quake teamate just found me last week, havent talked in over 18 years, he has a BF4 server set up, so wanted me to join the clan again.
Mar 21, 2015 at 10:50 AM - jbigler1986: What console
Mar 21, 2015 at 10:51 AM - Mike Glass: I havent played really, I have a ps3 i mess with once and while. the BF is for PC though
Mar 21, 2015 at 10:51 AM - jbigler1986: Nvm. Pc
Mar 21, 2015 at 10:51 AM - Mike Glass: I like car games and FPS types.
Mar 21, 2015 at 10:52 AM - Mike Glass: wow my internet is smoking tonight already 59%
Mar 21, 2015 at 10:53 AM - jbigler1986: Nice. I'm ready for GTA V on pc
Mar 21, 2015 at 10:54 AM - Mike Glass: I have 4 for PS3, its ok.
Mar 21, 2015 at 10:55 AM - jbigler1986: Gta v is awesome. Played it on 360.
Mar 21, 2015 at 10:56 AM - Mike Kelly: yeah GTA5 is a really good one
Mar 21, 2015 at 10:56 AM - Mike Kelly: didn't beat it
Mar 21, 2015 at 10:56 AM - jbigler1986: I don't game much at all anymore. I use to mod xbox 360, ps3 and xbox
Mar 21, 2015 at 10:56 AM - jbigler1986: Use to be into it big time. Not anymore though
Mar 21, 2015 at 10:57 AM - Mike Kelly: yeah i stopped after the xbox
Mar 21, 2015 at 10:57 AM - Mike Kelly: i did some dvd mods on my 360 but i kept getting RROD ones
Mar 21, 2015 at 10:57 AM - Mike Kelly: wish the 360 was as open as the original, that thing owned
Mar 21, 2015 at 10:58 AM - jbigler1986: Yeah. There are ways around it. Gets pricey though
Mar 21, 2015 at 10:58 AM - Mike Kelly: yeah i didn't wanna buy a JTAG
Mar 21, 2015 at 10:59 AM - jbigler1986: I have a jtag on one of the slim 360s but I never use it
Mar 21, 2015 at 10:59 AM - jbigler1986: I used to install them for people along with the dvd mods.
Mar 21, 2015 at 11:00 AM - Mike Glass: jtag havent heard that since the dish days.
Mar 21, 2015 at 11:06 AM - jbigler1986: https://www.myminifactory.com/uploads/object-images/dd7a233fa90b11921a16be55334c857dd9359890.JPG
Mar 21, 2015 at 11:06 AM - jbigler1986: Printing that right now
Mar 21, 2015 at 11:07 AM - Mike Glass: Im on a 100 hour print..lol
Mar 21, 2015 at 11:08 AM - Mike Glass: or it seems like it
Mar 21, 2015 at 11:11 AM - jbigler1986: Lol. Got some ribbing going on. Idk why. Esteps are good and printed that test cube this morning that came out good. Everything is tight and lubed
Mar 21, 2015 at 11:13 AM - jbigler1986: http://imgur.com/HPQTi5H
Mar 21, 2015 at 11:13 AM - jbigler1986: Looking at it in the pic it doesn't look bad. Maybe it's the lighting on the robo
Mar 21, 2015 at 11:14 AM - Mike Glass: you left her and now she is pissed..lol
Mar 21, 2015 at 11:14 AM - Mike Kelly: pics tend to show things worse
Mar 21, 2015 at 11:15 AM - Mike Glass: white is the worst.
Mar 21, 2015 at 11:16 AM - Mike Glass: it is showing consistancy with the threads
Mar 21, 2015 at 11:16 AM - jbigler1986: Looks good in the picture. Doesn't feel bad when I run my finger down it. (sounds weird)
Mar 21, 2015 at 11:17 AM - jbigler1986: Let me turn on camera and see if you can see it. Maybe it's just the lighting.
Mar 21, 2015 at 11:21 AM - jbigler1986: ustream.tv/channel/jbigler1986
Mar 21, 2015 at 11:24 AM - jbigler1986: Stupid laptop
Mar 21, 2015 at 11:52 AM - Mike Glass: what happened
Mar 21, 2015 at 11:53 AM - jbigler1986: Keeps losing connection. Hold on
Mar 21, 2015 at 11:56 AM - jbigler1986: Fixed
Mar 21, 2015 at 11:59 AM - Mike Glass: only one fan?
Mar 21, 2015 at 11:59 AM - jbigler1986: It's ABS. Didn't have enough white PLA
Mar 21, 2015 at 11:59 AM - Mike Glass: ohhh, gotcha
Mar 21, 2015 at 12:00 PM - Mike Glass: how long has that been printing
Mar 21, 2015 at 12:04 PM - jbigler1986: Idk. Like 6 hours. I had my wife start it from SD
Mar 21, 2015 at 12:05 PM - Mike Glass: is it a pencil holder? does she work for dentist?

 

Mar 21, 2015 at 12:07 PM - jbigler1986: No. It's a toothbrush holder

 

Mar 21, 2015 10:18 PM - jbigler1986: Morning
Mar 21, 2015 11:50 PM - jbigler1986: wtf is going on
Mar 21, 2015 11:50 PM - jbigler1986: ahhhh
Mar 22, 2015 12:09 AM - jbigler1986: .8 nozzle is extruding toomuch and not moving enough. hmmm
Mar 22, 2015 12:26 AM - jbigler1986: back to .4 i go
Mar 22, 2015 1:33 AM - jbigler1986: Nevermind. Figured it out.
Mar 22, 2015 1:47 AM - BryZad: morning all
Mar 22, 2015 1:48 AM - BryZad: anyone know how to to make more top layers on prints in Cura I just want to add like 3 more layes to close up top layers of prints
Mar 22, 2015 1:51 AM - Mike Glass: add more the the shell thickness Bry
Mar 22, 2015 1:51 AM - Mike Glass: i mena the bottom/top fthickness
Mar 22, 2015 1:52 AM - Mike Glass: you cant choose just top, you have to do both top and bottom. You can do that in repetier though.
Mar 22, 2015 2:03 AM - jbigler1986: MG. So you think the extruder moves fast with just. 8 nozzle? Try setting the multiplier to 100
Mar 22, 2015 2:04 AM - jbigler1986: Woops. Meant to set it to 1. Accidentally set it to 100
Mar 22, 2015 2:10 AM - Mike Glass: lol
Mar 22, 2015 2:31 AM - jbigler1986: It would put down a big glob then nothing. Took like 2 seconds to schred the filament. Lol
Mar 22, 2015 2:35 AM - Mike Glass: nice
Mar 22, 2015 2:52 AM - jbigler1986: Printing the cut tool holder. See how it goes
Mar 22, 2015 2:54 AM - Mike Glass: the dremel one?
Mar 22, 2015 3:30 AM - jbigler1986: No. Your tool holder
Mar 22, 2015 3:31 AM - jbigler1986: Have you printed it since you made the warp changes?
Mar 22, 2015 3:46 AM - Mike Glass: I didnt keep that I was just playing, there was a guy on youtube that explaining that could prevent warping.
Mar 22, 2015 4:09 AM - jbigler1986: Ahhh. I just came home to the parts. Warped like crazy. I was printing at. 4 height with a .4 nozzle though. Going to put on the 8 and try again.
Mar 22, 2015 4:26 AM - jbigler1986: What is everyone up to
Mar 22, 2015 5:12 AM - BryZad: i am making parts that are guled together and just need a thicker top not bottom darn
Mar 22, 2015 5:38 AM - jbigler1986: Use repetier
Mar 22, 2015 5:38 AM - jbigler1986: It will let you increase just top
Mar 22, 2015 7:55 AM - jbigler1986: Switched to pla. Almost done
Mar 22, 2015 7:56 AM - Mike Kelly: what ya making
Mar 22, 2015 8:21 AM - jbigler1986: The tool holder. Gave up on abs. To many issues. First time printing PLA with the . 8 nozzle. Looks good. It's almost done
Mar 22, 2015 8:22 AM - Mike Kelly: sweet
Mar 22, 2015 8:22 AM - Mike Kelly: probably good if you don't do much fine detail, then you'd need a ton of cooling
Mar 22, 2015 8:24 AM - jbigler1986: Yeah. Only using the 8 on big stuff
Mar 22, 2015 8:24 AM - Mike Kelly: man KU is playing like crap
Mar 22, 2015 8:26 AM - jbigler1986: Yep. I didn't bring my bracket home. Going to be a lot of X's on it tomorrow
Mar 22, 2015 8:28 AM - Mike Kelly: i wish i hadn't changed nova to be in my final 4
Mar 22, 2015 8:35 AM - jbigler1986: I got Duke, Kentucky, Wisconsin and I don't remember. May have had Kansas
Mar 22, 2015 8:35 AM - Mike Kelly: i originally had louisville, but changed it last minute to nova
Mar 22, 2015 8:36 AM - Mike Kelly: shoulda stuck with it
Mar 22, 2015 8:38 AM - jbigler1986: Yeah. Been a crazy year like usual
Mar 22, 2015 8:38 AM - Mike Kelly: wouldn't call it madness otherwise
Mar 22, 2015 8:59 AM - jbigler1986: Very true. Look at UCLA
Mar 22, 2015 9:52 AM - jbigler1986: Printing the base now
Mar 22, 2015 9:53 AM - jbigler1986: What is a good low/no warp ABS alternative? I know it's supposed to be XT but MG has had warping bad
Mar 22, 2015 10:23 AM - Mike Kelly: uh
Mar 22, 2015 10:23 AM - Mike Kelly: XT
Mar 22, 2015 10:23 AM - Mike Kelly: ABS with a hips raft
Mar 22, 2015 10:23 AM - Mike Kelly: or on Printinz
Mar 22, 2015 10:30 AM - Mike Glass: I Tried on more time with a small part and it warped again, Im done with it.
Mar 22, 2015 10:31 AM - Mike Glass: I had 12 hour print with my Justpla and it was perfect.
Mar 22, 2015 10:41 AM - Mike Kelly: been a while since i tried pla
Mar 22, 2015 11:25 AM - jbigler1986: I have like no issues with it
Mar 22, 2015 11:26 AM - jbigler1986: Besides when I set my multiplier to 100 instead of 1
Mar 22, 2015 11:38 AM - jbigler1986: Ordered some hatchbox
Mar 22, 2015 11:38 AM - jbigler1986: Do they have normal red pla or just translucent
Mar 22, 2015 11:41 AM - Mike Glass: they have regular also
Mar 22, 2015 11:43 AM - jbigler1986: Good. You should order the gold. The gold I have printed looks awesome
Mar 22, 2015 11:59 AM - jbigler1986: About to glue the tool holder together
Mar 22, 2015 12:24 PM - Mike Kelly: anyone find a dark blue filament?
Mar 22, 2015 12:28 PM - jbigler1986: I have not. I would like one though
Mar 22, 2015 12:31 PM - jbigler1986: I have seen a lighter blue that I want too. Almost a baby blue. Can't remember who makes it
Mar 22, 2015 12:36 PM - Mike Glass: LIke mine
Mar 22, 2015 12:37 PM - jbigler1986: dark blue or baby blue?
Mar 22, 2015 12:37 PM - Mike Glass: dark blue
Mar 22, 2015 12:37 PM - jbigler1986: pic?
Mar 22, 2015 12:38 PM - Mike Glass: same color that I made my cam holder.
Mar 22, 2015 12:38 PM - jbigler1986: gotcha
Mar 22, 2015 12:38 PM - Mike Glass: thats is the hatchbox
Mar 22, 2015 12:39 PM - jbigler1986: tool holder turned out great with natural clolor pla
Mar 22, 2015 12:39 PM - Mike Glass: http://community.robo3d.com/index.php?threads/robo-on-steroids.4716/
Mar 22, 2015 12:42 PM - jbigler1986: robo is printing beautifully now. finally
Mar 22, 2015 12:46 PM - Mike Glass: mines been going non stop all weekend.
Mar 22, 2015 12:48 PM - jbigler1986: Think I can print this with no support? He says he did
Mar 22, 2015 12:48 PM - jbigler1986: http://www.thingiverse.com/thing:569938
Mar 22, 2015 12:49 PM - Mike Glass: easily
Mar 22, 2015 12:50 PM - jbigler1986: 1 hour and 30 minutes.
Mar 22, 2015 12:50 PM - Mike Glass: I imagine alot of retraction
Mar 22, 2015 12:52 PM - jbigler1986: let me get video up
Mar 22, 2015 12:53 PM - Mike Glass: lets see the tool holder
Mar 22, 2015 12:53 PM - jbigler1986: i will grab it
Mar 22, 2015 12:53 PM - jbigler1986: just a sec
Mar 22, 2015 12:57 PM - jbigler1986: ok. video is up. let me grab the tool holder
Mar 22, 2015 12:58 PM - Mike Glass: ugg ads
Mar 22, 2015 12:58 PM - jbigler1986: tell me when ready
Mar 22, 2015 12:59 PM - Mike Glass: wtf its still running
Mar 22, 2015 1:00 PM - Mike Glass: ok its done
Mar 22, 2015 1:01 PM - Mike Glass: so yo did cut it eh.
Mar 22, 2015 1:01 PM - Mike Glass: looks nicer than mine, effin xt is blah
Mar 22, 2015 1:02 PM - jbigler1986: yep
Mar 22, 2015 1:02 PM - jbigler1986: Pretty happy with it
Mar 22, 2015 1:02 PM - jbigler1986: fucking glue is taking forever to dry
Mar 22, 2015 1:04 PM - Mike Glass: what glue?
Mar 22, 2015 1:04 PM - jbigler1986: gorilla glue super glue
Mar 22, 2015 1:05 PM - jbigler1986: said 15 seconds. Bullshit
Mar 22, 2015 1:06 PM - Mike Glass: I dont like gorilla glue,
Mar 22, 2015 1:06 PM - Mike Glass: I use the gel loctite superglue, that shit works
Mar 22, 2015 1:07 PM - jbigler1986: Thought about getting that
Mar 22, 2015 1:08 PM - jbigler1986: I got some loctite that's in a push pen form. That shit is good. Got the gorilla glue at the same time
Mar 22, 2015 1:09 PM - jbigler1986: nvm. It's krazy glue brand
Mar 22, 2015 1:10 PM - jbigler1986: Alright. Going to bed. Monday's suck. Nite. See you guys tomorrow
Mar 22, 2015 1:10 PM - Mike Glass: yup I hear ya, im about to go myself

 

Mar 22, 2015 1:10 PM - Mike Glass: l8tr

 

Mar 22, 2015 10:57 PM - Mike Kelly: mornin
Mar 22, 2015 11:05 PM - Quest: morning.
Mar 22, 2015 11:12 PM - Mike Kelly: how are things
Mar 22, 2015 11:27 PM - Stephen Capistron: its been quiet here this morning
Mar 22, 2015 11:30 PM - Mike Kelly: it's been quiet a lot lately
Mar 22, 2015 11:30 PM - Mike Kelly: i think people are getting bored
Mar 22, 2015 11:30 PM - Stephen Capistron: or frustrated
Mar 22, 2015 11:31 PM - Mike Kelly: or both!
Mar 22, 2015 11:32 PM - Mike Kelly: i'm waiting on some crimp HD15 connectors to come in
Mar 22, 2015 11:32 PM - Mike Kelly: the solder ones aren't as nice to work with
Mar 22, 2015 11:34 PM - Quest: getting ready for work and I dont want to go..
Mar 22, 2015 11:34 PM - Stephen Capistron: i just don't like soldering
Mar 22, 2015 11:34 PM - Stephen Capistron: i've been in the office for 3 hours already
Mar 22, 2015 11:34 PM - Mike Kelly: i like soldering but it's sooo cramped in there
Mar 22, 2015 11:34 PM - Mike Kelly: i had a couple wires come undone and if i'm gonna take it off to repair i might as well just go to crimp
Mar 23, 2015 12:10 AM - jbigler1986: Good morning
Mar 23, 2015 12:14 AM - Mike Kelly: morn
Mar 23, 2015 12:14 AM - Mike Kelly: just stabbed the shit out of my hand
Mar 23, 2015 12:14 AM - Mike Kelly: that sucked
Mar 23, 2015 12:15 AM - jbigler1986: I got about an inch long one yesterday morning removing broken filament from the hotend
Mar 23, 2015 12:15 AM - jbigler1986: on the palm of my hand
Mar 23, 2015 12:16 AM - Mike Kelly: i have this little tri tip deburring tool i use for removing plastic
Mar 23, 2015 12:17 AM - Mike Kelly: and it pierced the piece and went in like 1/8"
Mar 23, 2015 12:17 AM - jbigler1986: It was broke of by the extruder when I decided to set the multiplier to 100
Mar 23, 2015 12:18 AM - jbigler1986: had to pull it out with pliers. I could have pushed it through now thinking about it
Mar 23, 2015 12:19 AM - jbigler1986: My bowl didn't finish right overnight
Mar 23, 2015 12:19 AM - jbigler1986: What are you rewiring
Mar 23, 2015 12:20 AM - Mike Kelly: my z endstop wires broke off
Mar 23, 2015 12:21 AM - jbigler1986: How did that happen
Mar 23, 2015 12:22 AM - Mike Kelly: not entirely sure, it shouldn't feel any strains
Mar 23, 2015 12:24 AM - jbigler1986: Must have got caught on a part maybe
Mar 23, 2015 12:24 AM - Mike Kelly: http://i.imgur.com/1jce6U3.jpg
Mar 23, 2015 12:26 AM - jbigler1986: Was that the wounding tool?
Mar 23, 2015 12:27 AM - Mike Kelly: yup
Mar 23, 2015 12:27 AM - Mike Kelly: i think the bleeding stop
Mar 23, 2015 12:27 AM - jbigler1986: peroxide that bad boy
Mar 23, 2015 12:27 AM - Mike Kelly: actually you shouldn't use peroxide on wounds
Mar 23, 2015 12:32 AM - jbigler1986: i usually use alcohol. i don't have peroxide
Mar 23, 2015 12:33 AM - Mike Kelly: yeah alcohol's the way to go
Mar 23, 2015 12:33 AM - Bill Monroe: let your dog lick it
Mar 23, 2015 12:34 AM - jbigler1986: ummmmm
Mar 23, 2015 12:57 AM - Mike Kelly: cleaned it up a bit, wonder when my last tetanus was...
Mar 23, 2015 12:59 AM - jbigler1986: Lol.
Mar 23, 2015 1:00 AM - jbigler1986: DAmn. This bowl failed too
Mar 23, 2015 1:03 AM - jbigler1986: https://grabcad.com/library/spiral-bowl-1
Mar 23, 2015 1:04 AM - jbigler1986: Failed about halfway up. Should have added some support I guess
Mar 23, 2015 1:04 AM - Mike Kelly: yeah that won't print well without support
Mar 23, 2015 1:05 AM - jbigler1986: Is slic3r support good? Or should i use meshmixer
Mar 23, 2015 1:05 AM - Mike Kelly: i haven't used slic3rs support in a while but i think it's much improved
Mar 23, 2015 1:23 AM - Mike Glass: Slic3r support is kinda scarry, it uses way to much on must parts I have tried. Morning btw
Mar 23, 2015 1:24 AM - Mike Glass: That wound could'nt be that bad, there is not blood dripping from the tool..lol
Mar 23, 2015 1:28 AM - jbigler1986: Gonna see hoe meshmixer auto support looks
Mar 23, 2015 1:29 AM - Mike Glass: Use S3d
Mar 23, 2015 1:32 AM - jbigler1986: Do you have it?
Mar 23, 2015 1:35 AM - Mike Glass: ummmm, no
Mar 23, 2015 1:36 AM - jbigler1986: Yeah I heard slic3r support was bad
Mar 23, 2015 1:38 AM - Mike Glass: it works, just overkill I think
Mar 23, 2015 1:39 AM - Mike Kelly: yeah though there was a bunch of blood from it as soon as I pulled it out, dunno how it came out clean...
Mar 23, 2015 2:38 AM - Mike Kelly: i don't know what to do now that there's no daytime basketball
Mar 23, 2015 2:38 AM - jbigler1986: When are the next games
Mar 23, 2015 2:41 AM - Mike Kelly: not till thursday
Mar 23, 2015 2:45 AM - jbigler1986: My bracket is a disaster
Mar 23, 2015 2:45 AM - jbigler1986: East region I only have louisville left.
Mar 23, 2015 2:46 AM - jbigler1986: And I have them losing the next game
Mar 23, 2015 2:46 AM - Mike Kelly: mine's ok but someone else has my final 4 so there's no way i can win
Mar 23, 2015 2:47 AM - jbigler1986: Virginia losing screwed me
Mar 23, 2015 2:48 AM - Mike Kelly: nova really screwed me
Mar 23, 2015 2:49 AM - Mike Kelly: i had VA losing to OU so i need mich st to do that
Mar 23, 2015 2:49 AM - Mike Kelly: i have 8/16
Mar 23, 2015 2:49 AM - Mike Kelly: and 6 potentials for the elite 8
Mar 23, 2015 2:50 AM - jbigler1986: I have 8 too
Mar 23, 2015 2:50 AM - jbigler1986: My wife has 9
Mar 23, 2015 2:51 AM - jbigler1986: I did 2 on espn. I did one normal and 1 I picked all of the higher seeds all the way. The one that I picked all of the higher seeds i have 20% correct. Lol
Mar 23, 2015 3:02 AM - Mike Kelly: man the internet here is so bad
Mar 23, 2015 3:04 AM - jbigler1986: SO I added support to slic3r. Without support it's 3 hours. With support it's 13 hours. Wow
Mar 23, 2015 3:05 AM - Mike Glass: told ya, overkill
Mar 23, 2015 3:05 AM - jbigler1986: Meshmixer crashes for me though on this shit laptop
Mar 23, 2015 3:06 AM - Mike Glass: did you read my pm JB?
Mar 23, 2015 3:08 AM - jbigler1986: Just replied
Mar 23, 2015 3:13 AM - Mike Glass: where is the best place to buy an arduino and ramps?
Mar 23, 2015 3:20 AM - jbigler1986: Amazon probably
Mar 23, 2015 3:22 AM - Mike Glass: I found a combo with a graphics lcd for 64 , but dont know if that is the same as the robo.
Mar 23, 2015 3:23 AM - jbigler1986: Link?
Mar 23, 2015 3:23 AM - Mike Glass: hey Mike here is that blue http://www.amazon.com/HATCHBOX-1-75...indust_27?ie=UTF8&refRID=1YG1NX0CEHSN84YX9S22
Mar 23, 2015 3:23 AM - Mike Glass: http://www.amazon.com/gp/product/B00L9BX8AS/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=A7Y75ROU9VMVI
Mar 23, 2015 3:24 AM - Mike Glass: ugg now its unavailible
Mar 23, 2015 3:24 AM - jbigler1986: That looks correct
Mar 23, 2015 3:26 AM - jbigler1986: That's the same lcd I have
Mar 23, 2015 3:26 AM - jbigler1986: Works perfect. I suggest it forsure
Mar 23, 2015 3:26 AM - Mike Glass: yep, Thats what I want it for.
Mar 23, 2015 3:27 AM - jbigler1986: Literally just need to edit 2 lines in the firmware
Mar 23, 2015 3:27 AM - jbigler1986: http://www.amazon.com/Sintron-Graph...5124&sr=8-1&keywords=full+graphics+controller
Mar 23, 2015 3:27 AM - jbigler1986: Cheap
Mar 23, 2015 3:27 AM - Mike Glass: sounds tought
Mar 23, 2015 3:27 AM - Mike Glass: tough
Mar 23, 2015 3:28 AM - Mike Glass: $21 on ebay
Mar 23, 2015 3:28 AM - jbigler1986: Get that Prime though
Mar 23, 2015 3:28 AM - jbigler1986: Have it in 2 days with Prime
Mar 23, 2015 3:32 AM - jbigler1986: Very difficult
Mar 23, 2015 3:32 AM - jbigler1986: Not

 

Mar 23, 2015 3:47 AM - Mike Kelly: i'm looking for like a navy blue
Mar 23, 2015 3:48 AM - jbigler1986: https://www.inventables.com/technologies/dark-blue-abs-3d-printer-filament
Mar 23, 2015 3:49 AM - Mike Glass: JustPla has a navy blue but I think it is the same color if not lighter then the Hatchbox
Mar 23, 2015 3:51 AM - Mike Glass: https://www.inventables.com/technologies/dark-blue-abs-3d-printer-filament
Mar 23, 2015 3:51 AM - Mike Glass: lol damn you
Mar 23, 2015 3:54 AM - jbigler1986: I win
Mar 23, 2015 3:54 AM - jbigler1986: "This filament is compatible with RepRap 3D printers. Using it in a MakerBot will void its warranty." WTF
Mar 23, 2015 3:55 AM - Mike Glass: Makerbots wants you to use their filament im sure.
Mar 23, 2015 3:57 AM - JeffTheMess: howdy folks
Mar 23, 2015 3:57 AM - jbigler1986: Ahhh. I was reading it wrong. I thought it would void the filament warranty
Mar 23, 2015 3:57 AM - jbigler1986: Hello
Mar 23, 2015 3:58 AM - Mike Kelly: yeah if you use something other than makerbot firmware in your "Smart"Extruder it voids the warranty
Mar 23, 2015 3:58 AM - Mike Kelly: 39/kg is kinda pricey though
Mar 23, 2015 3:59 AM - Mike Glass: just get some nylon and dye it
Mar 23, 2015 3:59 AM - jbigler1986: A little. I don't see lots of options for the blue tou want though
Mar 23, 2015 3:59 AM - Mike Kelly: yeah it seems to be rare
Mar 23, 2015 4:00 AM - Mike Glass: Solution tech has the next darkest for $26, I have some in silver, really nice stuff.
Mar 23, 2015 4:03 AM - Mike Kelly: not finding anything with that search query
Mar 23, 2015 4:04 AM - Mike Glass: sorry Solutech
Mar 23, 2015 4:04 AM - jbigler1986: http://www.3dsolutech.com/catalog/abs/navy-blue-abs-filament-175mm-1kg-22-lbs-spool
Mar 23, 2015 4:05 AM - Mike Kelly: that looks perfect
Mar 23, 2015 4:05 AM - Mike Kelly: i like their green as well
Mar 23, 2015 4:05 AM - Mike Kelly: though i would like one as dark as the michigan blue
Mar 23, 2015 4:06 AM - jbigler1986: I like the teal and aqua blue
Mar 23, 2015 4:06 AM - Mike Kelly: i caught the bug of buying filament colors
Mar 23, 2015 4:07 AM - jbigler1986: I know how that is
Mar 23, 2015 4:07 AM - Mike Glass: I almost went through 2 lbs this weekend.
Mar 23, 2015 4:09 AM - jbigler1986: DId you have a chance to add support yet?
Mar 23, 2015 4:10 AM - Mike Glass: oh, spaced it hold on
Mar 23, 2015 4:10 AM - jbigler1986: Lol\
Mar 23, 2015 4:12 AM - jbigler1986: Make the tips like 2mm
Mar 23, 2015 4:12 AM - jbigler1986: If possible
Mar 23, 2015 4:16 AM - Mike Glass: where is the auto support feature?
Mar 23, 2015 4:20 AM - jbigler1986: analaysis
Mar 23, 2015 4:20 AM - jbigler1986: overhangs
Mar 23, 2015 4:22 AM - jbigler1986:
Mar 23, 2015 4:37 AM - Mike Glass: I cant figure how to move the damn thing on the platform all the way
Mar 23, 2015 4:39 AM - jbigler1986: Needs resized first. Then go to edit > Align > align to y axis
Mar 23, 2015 4:39 AM - jbigler1986: I think resize is in edit tab too
Mar 23, 2015 5:00 AM - BryZad: my RoBo have been going for almost a week straight with only little breaks when a print ends and I am not there to start another one
Mar 23, 2015 5:05 AM - Mike Kelly: you'll have your armor done in no time
Mar 23, 2015 5:19 AM - BryZad: no it is pumping out prop weapons
Mar 23, 2015 5:20 AM - Mike Kelly: cosplay then, w/e
Mar 23, 2015 5:24 AM - jbigler1986: Same thing
Mar 23, 2015 5:24 AM - jbigler1986: lol
Mar 23, 2015 5:25 AM - Mike Kelly: getting all technical up in hur
Mar 23, 2015 5:26 AM - BryZad: ha ha I am doing the full armor old school pep and fiberglass
Mar 23, 2015 5:26 AM - BryZad: and a lot of bondo and sanding
Mar 23, 2015 5:26 AM - BryZad: but a Spartan can't roll with out weapons ha ha
Mar 23, 2015 5:32 AM - Mike Glass: hey JB did you mean .2 on the tip diameter
Mar 23, 2015 5:33 AM - jbigler1986: yeah. my bad
Mar 23, 2015 5:36 AM - Mike Glass: ok what scale did you want?
Mar 23, 2015 5:36 AM - jbigler1986: like .7 should be good
Mar 23, 2015 5:40 AM - Mike Glass: It doesnt scale like that, I need to know what height then.
Mar 23, 2015 5:41 AM - jbigler1986: doesn't matter. just needs to be a little smaller to fit on build plate
Mar 23, 2015 5:41 AM - Mike Glass: under 100 mm?
Mar 23, 2015 5:43 AM - jbigler1986: what is it at now
Mar 23, 2015 5:44 AM - Mike Glass: 93x158
Mar 23, 2015 5:45 AM - jbigler1986: 120 would be ok
Mar 23, 2015 5:45 AM - Mike Glass: 131 is original
Mar 23, 2015 5:45 AM - jbigler1986: oh. then 100 would be fine
Mar 23, 2015 5:51 AM - Mike Glass: wow this thing takes alot of processor power.
Mar 23, 2015 5:52 AM - jbigler1986: That's probably why it was crashing on my crap laptop
Mar 23, 2015 5:52 AM - Mike Glass: 25% over 4 proccessors
Mar 23, 2015 5:53 AM - jbigler1986: dang. need to try it on my gaming rig
Mar 23, 2015 5:53 AM - Mike Glass: on pass 3/5
Mar 23, 2015 5:54 AM - jbigler1986: I wouldn't even get that far on the laptop
Mar 23, 2015 5:54 AM - Mike Glass: This is my my I5 laptop
Mar 23, 2015 5:56 AM - Mike Glass: it actually plays BF4 good with just a stock video card.
Mar 23, 2015 5:56 AM - jbigler1986: 4790k ON MY GAMING RIG
Mar 23, 2015 5:57 AM - jbigler1986: I laugh at people that buy alienware. Unless you don't have the time to build your own
Mar 23, 2015 5:58 AM - Mike Glass: I get HP cheap so thats what I use mainly.
Mar 23, 2015 5:58 AM - Mike Glass: more on the workstation Cad side
Mar 23, 2015 5:59 AM - jbigler1986: Yeah. Next upgrade is going to be more workstation than gaming
Mar 23, 2015 6:00 AM - Mike Glass: Think I will stay with laptop workstations they seem to work just fine and dont take up so much room.
Mar 23, 2015 6:17 AM - Mike Kelly: i wonder what would happen if you ran a cad gpu and gaming gpu on the same pc
Mar 23, 2015 6:19 AM - Mike Glass: the matrix..lol
Mar 23, 2015 6:20 AM - Mike Glass: hey should I get ramps with the 4988 or 8825 drivers?
Mar 23, 2015 6:21 AM - Mike Kelly: A4988 is pretty common
Mar 23, 2015 6:28 AM - Mike Glass: Yea, just heard the 8825 are more refined but didnt know if anybody had changed theirs on the robo.
Mar 23, 2015 6:29 AM - Mike Glass: Here it jb https://drive.google.com/file/d/0Bw9Fe7LfIIUTWGYyWUxsYzZxTVk/view?usp=sharing
Mar 23, 2015 6:29 AM - Mike Glass: its 32 gigs
Mar 23, 2015 6:29 AM - Mike Kelly: i feel like someone has but i don't remember who nor do i remember it being very beneficial
Mar 23, 2015 6:30 AM - Mike Glass: jk 17 megs
Mar 23, 2015 6:30 AM - Mike Glass: it was probably toy
Mar 23, 2015 6:33 AM - Mike Kelly: that sounds like something he would do
Mar 23, 2015 6:34 AM - Mike Glass: They are the same price so, not sure why if they are suppose to be better. who knows, guess just get what I have currently.
Mar 23, 2015 6:42 AM - BryZad: mike G you play bf4 nice
Mar 23, 2015 6:43 AM - Mike Glass: Just started, bought the prem pack this weekend.
Mar 23, 2015 6:44 AM - Mike Glass: My old friend from 20 years ago has the Old verterans server, we had 40 people in it last night, crazy time.
Mar 23, 2015 6:45 AM - Mike Kelly: i played a lot of BF3, flying helicopters was wicked fun
Mar 23, 2015 6:45 AM - Mike Kelly: i liked planes too but people kicked my ass in them
Mar 23, 2015 6:45 AM - BryZad: hey you should look up my clan Nunya we have a packed 64 player server
Mar 23, 2015 6:45 AM - BryZad: bf2 was the shit for flying choppers and plans
Mar 23, 2015 6:46 AM - BryZad: jb I have a 7900 on my gaming rig also
Mar 23, 2015 6:49 AM - Mike Glass: yea will have to hook up bry
Mar 23, 2015 6:50 AM - BryZad: we have a Ventrilo server also
Mar 23, 2015 6:53 AM - jbigler1986: Off work
Mar 23, 2015 6:53 AM - jbigler1986: Did that finish for you MG?
Mar 23, 2015 6:55 AM - Mike Glass: yea look above

 

Mar 23, 2015 6:55 AM - Mike Glass: We use teamspeak
Mar 23, 2015 6:56 AM - Mike Glass: anybody used aliexpress.com before?
Mar 23, 2015 6:57 AM - jbigler1986: Yeah
Mar 23, 2015 6:57 AM - jbigler1986: To buy flashcart
Mar 23, 2015 6:57 AM - Mike Kelly: i'm too impatient to shop alibaba
Mar 23, 2015 6:58 AM - Mike Glass: I know most of it is onthe slow boat, dont really care about time on this project
Mar 23, 2015 6:58 AM - Mike Glass: but even ebay pricing is double what you can get on ali.
Mar 23, 2015 6:58 AM - jbigler1986: It's a good site. I haven't had issues
Mar 23, 2015 6:59 AM - BryZad: it took me over 4-5 weeks to get some star bade LEDs from slow boat
Mar 23, 2015 7:00 AM - Mike Glass: gonna take me a three weeks to print the parts so not in a rush.
Mar 23, 2015 7:01 AM - jbigler1986: What are you building
Mar 23, 2015 7:03 AM - Mike Glass: Portable CNC/Lasercutter/3dprinter/
Mar 23, 2015 7:04 AM - BryZad: damn
Mar 23, 2015 7:04 AM - Mike Kelly: sounds adventurous
Mar 23, 2015 7:05 AM - Mike Glass: I need something portable for our business we started.
Mar 23, 2015 7:05 AM - Mike Glass: dont have 3k for a machine right now.
Mar 23, 2015 7:07 AM - Mike Kelly: that's what they all say
Mar 23, 2015 7:08 AM - Mike Glass: Ok well I do but thats besides the point
Mar 23, 2015 7:08 AM - jbigler1986: I needed my robo for my "business" too.
Mar 23, 2015 7:08 AM - jbigler1986: Just messing with you. Finally home.
Mar 23, 2015 7:09 AM - Mike Kelly: i bought my robo for fun but ended up using it to make prototypes
Mar 23, 2015 7:11 AM - jbigler1986: My parents own a restaurant and want me to print 500 Keychains for them. I was like Holy hell
Mar 23, 2015 7:12 AM - Mike Kelly: that would take forever
Mar 23, 2015 7:12 AM - jbigler1986: I know. Might have to get another printer for stuff like that
Mar 23, 2015 7:13 AM - jbigler1986: I like printing to much random stuff to not be able to use it for a while.
Mar 23, 2015 7:13 AM - Mike Kelly: probably quicker to get it injection molded
Mar 23, 2015 7:14 AM - jbigler1986: They don't need it until like July
Mar 23, 2015 7:23 AM - BryZad: I bought mine for prop building best thing I ever did
Mar 23, 2015 7:23 AM - Mike Glass: You can make molds on a 3d printer...eh
Mar 23, 2015 7:24 AM - Mike Kelly: what kind of molds
Mar 23, 2015 7:24 AM - BryZad: better and faster than ever trying to scratch build props
Mar 23, 2015 7:25 AM - Mike Glass: well you could do silicone molds or you could to lost pla casting.
Mar 23, 2015 7:25 AM - Mike Kelly: yup
Mar 23, 2015 7:25 AM - Mike Kelly: i want to build a foundry to do lost pla casting
Mar 23, 2015 7:28 AM - Mike Glass: Yea now thats its nice I need to finish mine. need some more silicate though
Mar 23, 2015 7:28 AM - Mike Glass: bbl time to go home.
Mar 23, 2015 7:37 AM - jbigler1986: I think it's finally time to print the "Vend" candy machine after I print this bowl
Mar 23, 2015 8:34 AM - Mike Glass: You think it will print?
Mar 23, 2015 9:33 AM - Mike Kelly: They should have a YouTube series like 'will it blend' but 'will it print'
Mar 23, 2015 9:46 AM - BryZad: look up should I microwave this YouTube series
Mar 23, 2015 10:29 AM - jbigler1986: Started the bowl. The support fused into the bowl.
Mar 23, 2015 10:47 AM - Mike Kelly: naturally
Mar 23, 2015 10:55 AM - jbigler1986: I mean not breakable
Mar 23, 2015 10:55 AM - jbigler1986: oh well
Mar 23, 2015 11:05 AM - Mike Glass: try cura supports
Mar 23, 2015 11:10 AM - jbigler1986: Will do
Mar 23, 2015 11:47 AM - Mike Glass: how goes it
Mar 23, 2015 11:54 AM - jbigler1986: Good. Got 4 parts printed for the candy machine
Mar 23, 2015 11:54 AM - jbigler1986: What are you up to
Mar 23, 2015 11:56 AM - Mike Glass: 10 parts out of 35 done so far.
Mar 23, 2015 11:57 AM - jbigler1986: Nice. About to start a 16 hour one
Mar 23, 2015 11:57 AM - Mike Glass: you crazy
Mar 23, 2015 12:31 PM - TechSupportGo: hello
Mar 23, 2015 12:33 PM - TechSupportGo: what is the steepest support angle you would go?
Mar 23, 2015 12:34 PM - Mike Glass: Hey tech
Mar 23, 2015 12:35 PM - Mike Glass: never had angle supports.
Mar 23, 2015 12:37 PM - TechSupportGo: trying to print that glock 17
Mar 23, 2015 12:38 PM - TechSupportGo: http://www.thingiverse.com/thing:719608/#files
Mar 23, 2015 12:41 PM - Mike Glass: doubt it would print good, they said he didnt even print it.
Mar 23, 2015 12:42 PM - Mike Glass: If I did, I would do it out of nylon.
Mar 23, 2015 12:45 PM - TechSupportGo: about to try it. I only have pla and abs
Mar 23, 2015 1:04 PM - TechSupportGo: you think .15 is a good res?
Mar 23, 2015 1:04 PM - Mike Glass: yea really nice I have a statue I did at that.
Mar 23, 2015 1:09 PM - TechSupportGo: sweet only 31 hours to go
Mar 23, 2015 1:09 PM - TechSupportGo: I slowed it down to 50 to increase layer consistency
Mar 23, 2015 1:14 PM - Mike Glass: did you print all the parts at once?
Mar 23, 2015 1:27 PM - BryZad: how goes MIke
Mar 23, 2015 1:30 PM - TechSupportGo: yep http://www.ustream.tv/channel/robo-3d-r1-live-techsupportgo
Mar 23, 2015 1:32 PM - TechSupportGo: I am live baby, 60% infill with support. it says this thing cost me about 10$ then factor in 30$ an hour for my time!!! lol
Mar 23, 2015 1:38 PM - TechSupportGo: I got my new 7.20 hobbed bolt 7 days ago and still havent installed it. I thought i needed it before I learned about seasoning. I havent had issues since. I will install it anyway because it may incresae quilty
Mar 23, 2015 1:39 PM - BryZad: I have a oiler on the top of the robo
Mar 23, 2015 1:39 PM - BryZad: Hey tech were you talking about Pepakura the other day ?
Mar 23, 2015 1:40 PM - TechSupportGo: Oh yeah I am designing a soap saver that will recycle small pieces of soap.. I will start building it in onshape if you are interested. I can message you my design draft once I get everything hashed out.
Mar 23, 2015 1:40 PM - TechSupportGo: yeah
Mar 23, 2015 1:40 PM - TechSupportGo: that was my vid
Mar 23, 2015 1:40 PM - TechSupportGo: I stilll have that helm
Mar 23, 2015 1:41 PM - BryZad: Nice i built a pep helmet also
Mar 23, 2015 1:41 PM - BryZad:
Mar 23, 2015 1:42 PM - BryZad: http://s1353.photobucket.com/user/BryZad/media/2013-03-15_21-43-45_439_zpsccea3c4d.jpg.html
Mar 23, 2015 1:42 PM - BryZad: http://s1353.photobucket.com/user/BryZad/media/IMG_20140622_155948_732_zps20882e3d.jpg.html
Mar 23, 2015 1:43 PM - TechSupportGo: I saw that, it looks bad asssssss
Mar 23, 2015 1:43 PM - TechSupportGo: thats why i shared the vid.. did you put fiber inside
Mar 23, 2015 1:45 PM - BryZad: yea i fiber glassed the inside
Mar 23, 2015 1:46 PM - BryZad: and bondo the outside to smooth it
Mar 23, 2015 1:46 PM - BryZad: i have a prop shot gun thread going in th project section of the forms
Mar 23, 2015 1:46 PM - TechSupportGo: when i did my edges I used a 2 inch brissle brush and sprayed the paint right on the brush then started from the corners and slightly stroked outward
Mar 23, 2015 1:46 PM - BryZad: M45 Halo Reach shotgun
Mar 23, 2015 1:47 PM - TechSupportGo: thats freaking awesom brad
Mar 23, 2015 1:47 PM - BryZad: yea i did the same on my helmet but not alot
Mar 23, 2015 1:47 PM - TechSupportGo: I mean bray
Mar 23, 2015 1:47 PM - TechSupportGo: is your name braydon>
Mar 23, 2015 1:47 PM - BryZad: My name is Brad you got it
Mar 23, 2015 1:47 PM - TechSupportGo: cool
Mar 23, 2015 1:48 PM - TechSupportGo: I am using nuroflexyn
Mar 23, 2015 1:48 PM - TechSupportGo: it make you smart as f$%#
Mar 23, 2015 1:48 PM - BryZad: for that glock build
Mar 23, 2015 1:48 PM - BryZad: really
Mar 23, 2015 1:48 PM - TechSupportGo: no its a brain pill, look it up
Mar 23, 2015 1:48 PM - BryZad: I dont know how you got all the parts to fit on that bed
Mar 23, 2015 1:49 PM - TechSupportGo: I like ir

 

Mar 23, 2015 1:49 PM - TechSupportGo: oh I just spent 20 min moving things around wanna see
Mar 23, 2015 1:50 PM - BryZad: your build layout ?
Mar 23, 2015 1:50 PM - BryZad: that would be cool
Mar 23, 2015 1:50 PM - BryZad: so why you taking the brain booster
Mar 23, 2015 1:56 PM - TechSupportGo: hahah I just crashed the live feed
Mar 23, 2015 1:56 PM - TechSupportGo: trying to add the layout
Mar 23, 2015 1:57 PM - BryZad: add no worries
Mar 23, 2015 1:57 PM - BryZad: ahhh
Mar 23, 2015 1:59 PM - TechSupportGo: will just share a pick
Mar 23, 2015 1:59 PM - TechSupportGo: pic
Mar 23, 2015 2:01 PM - toy: yo
Mar 23, 2015 2:01 PM - TechSupportGo: https://drive.google.com/file/d/0B8FWeUGKaHaxMVVHNEdQMzBHX0U/view?usp=sharing
Mar 23, 2015 2:02 PM - TechSupportGo: boom I will use this for my son to lear funbamentals
Mar 23, 2015 2:03 PM - BryZad: i don't think you brain booster is working
Mar 23, 2015 2:03 PM - BryZad: damn that a lot of parts
Mar 23, 2015 2:04 PM - TechSupportGo: I am typing so fast its not picking up the strokes orrrrrrrrr I slowly slipping into my own newly formed language
Mar 23, 2015 2:04 PM - TechSupportGo: plus you only take it in the morning
Mar 23, 2015 2:05 PM - TechSupportGo: we started a thinktank
Mar 23, 2015 2:06 PM - TechSupportGo: eight of us get together for four hours a day discussing potential money making projects
Mar 23, 2015 2:07 PM - TechSupportGo: I should be done with the site this weekend so everyone can play.. its one of those things where you have to contribute to benefit from the site
Mar 23, 2015 2:08 PM - BryZad: nice that is cool
Mar 23, 2015 2:08 PM - TechSupportGo: I am just going to use my HowToKid site. Right now its just setting there
Mar 23, 2015 2:09 PM - BryZad: is it a think tank to slove world issues or to just make money
Mar 23, 2015 2:11 PM - TechSupportGo: well when you join you provide input to 3 random scenarios then post a scenario . popular scenarios get promoted to the actual thinktank that has an agenda for each project.
Mar 23, 2015 2:13 PM - BryZad: ahh sounds like it is fun to combin together
Mar 23, 2015 2:14 PM - BryZad: combine brains
Mar 23, 2015 2:15 PM - TechSupportGo: once you finish your initial inputs you can save you scnario and post it anytime to gain insight from other people perspective. feedback will be given in a very specific format as well
Mar 23, 2015 2:18 PM - BryZad: sounds like you have it all planed out
Mar 23, 2015 2:18 PM - TechSupportGo: you can grade each scenario over several different categories then apply bullet style or essay format feedback
Mar 23, 2015 2:19 PM - TechSupportGo: this will help with auto placement
Mar 23, 2015 2:20 PM - TechSupportGo: everything is constantly building a printable packet
Mar 23, 2015 2:22 PM - TechSupportGo: lots of possibilities I am sure the quick money section will rank up there
Mar 23, 2015 2:22 PM - TechSupportGo: I will let you know when we ar a go
Mar 23, 2015 2:23 PM - TechSupportGo: going to bed, that is an awesome helm BTW
Mar 23, 2015 2:25 PM - BryZad: thanks again you have a good night
Mar 23, 2015 2:26 PM - TechSupportGo: oh yeah my 11 yo son shooting his 380 day before yesterday https://drive.google.com/file/d/0B8FWeUGKaHaxZkctRFB5RTNvV3M/view?usp=sharing
Mar 23, 2015 2:27 PM - BryZad: you can shoot in your back yard ?
Mar 23, 2015 2:29 PM - TechSupportGo: hell yeah baby its Texas you can pretty much shoot anywhere!!
Mar 23, 2015 2:30 PM - BryZad: nice i am In Arizona i have to drive may 20 mins to lol
Mar 23, 2015 2:31 PM - TechSupportGo: here you have to be on at least 2 acres and have a dirt backstop
Mar 23, 2015 2:32 PM - BryZad: nice two acres is a little pricy here
Mar 23, 2015 7:43 PM - TechSupportGo: good morning everyone! Rise and Shine Have a great day!
Mar 23, 2015 8:01 PM - jbigler1986: Morning
Mar 23, 2015 8:01 PM - jbigler1986: 19 hour print is started
Mar 23, 2015 8:58 PM - jbigler1986: http://www.ustream.tv/channel/jbigler1986

 

Mar 23, 2015 at 9:33 PM - JeffTheMess: top of the morning to all
Mar 23, 2015 at 9:34 PM - JeffTheMess: what are we printing today?
Mar 23, 2015 at 9:35 PM - jbigler1986: Vending machineee
Mar 23, 2015 at 9:37 PM - JeffTheMess: cool, I see you upgraded your light very nice
Mar 23, 2015 at 9:38 PM - jbigler1986: YEP
Mar 23, 2015 at 9:39 PM - jbigler1986: Is it me or does the front right look like it popped off of the bed?
Mar 23, 2015 at 9:40 PM - JeffTheMess: it did you can tell by the reflection
Mar 23, 2015 at 9:41 PM - JeffTheMess: you are using pla I assume
Mar 23, 2015 at 9:41 PM - jbigler1986: Oh well. Doesn't look like it has messed up the print
Mar 23, 2015 at 9:42 PM - JeffTheMess: yeah looks like you also have a disconnected wired too
Mar 23, 2015 at 9:43 PM - jbigler1986: No. Just a piece of tape
Mar 23, 2015 at 9:44 PM - jbigler1986: Didn't have shrink wrap when I wired new hotend up. I do no just haven't fixed it.
Mar 23, 2015 at 9:45 PM - JeffTheMess: thats good
Mar 23, 2015 at 9:48 PM - jbigler1986: Thankfully this part is huge so it's not going anywhere with that corner not adhered
Mar 23, 2015 at 9:55 PM - JeffTheMess: Robo maybe should a have a live level check to reduce grind to print like that...or is that too much to ask for
Mar 23, 2015 at 9:57 PM - Stephen Capistron: In cura you can see the G29 output in the terminal
Mar 23, 2015 at 9:57 PM - Stephen Capistron: can always use that to adjust the level
Mar 23, 2015 at 10:00 PM - jbigler1986: Front right was a little lower than everywhere else. Should I just put a thin washer under the magnet on the front right of the bed?
Mar 23, 2015 at 10:00 PM - Stephen Capistron: A small swatch of paper or two between the magnets might do
Mar 23, 2015 at 10:01 PM - jbigler1986: Autolevel would be nice to make it perfect. but not a huge deal. At least on this print anyways
Mar 23, 2015 at 10:02 PM - JeffTheMess: when you first started to print was it adhered to the bed?
Mar 23, 2015 at 10:02 PM - jbigler1986: I could tell by the skirt that it wasn't very smashed on the front right
Mar 23, 2015 at 10:04 PM - jbigler1986: So I knew if wouldn't be adhered very well there.
Mar 23, 2015 at 10:06 PM - jbigler1986: That piece of tape is annoying the hell out of me. Gotta stop watching it
Mar 23, 2015 at 10:09 PM - JeffTheMess: lol yeah it is
Mar 23, 2015 at 10:18 PM - JeffTheMess: Carbon fiber filament....http://www.engineering.com/3DPrinti...es-New-Carbon-Fiber-3D-Printing-Filament.aspx
Mar 23, 2015 at 10:35 PM - jbigler1986: I have yet to print anything besides PLA and ABS. Wanna try the wood and semiflex
Mar 23, 2015 at 10:44 PM - JeffTheMess: for me its all about strength, longevity and weight.
Mar 23, 2015 at 11:00 PM - jbigler1986: can I use e3d v5 heater block with hexagon heatsink?
Mar 23, 2015 at 11:09 PM - Mike Kelly: morning
Mar 23, 2015 at 11:10 PM - Mike Kelly: lemme check on that jb
Mar 23, 2015 at 11:17 PM - jbigler1986: ok
Mar 23, 2015 at 11:18 PM - jbigler1986: You can use hexagon nozzles on e3d heat block so I would assume it would work. Not sure though. Just want to double check before I order it
Mar 23, 2015 at 11:21 PM - Mike Kelly: no it won't
Mar 23, 2015 at 11:21 PM - Mike Kelly: you have that backwards
Mar 23, 2015 at 11:22 PM - Mike Kelly: you can use e3d nozzles on the hexagon, but not the other way around
Mar 23, 2015 at 11:22 PM - jbigler1986: oh. Damn me.
Mar 23, 2015 at 11:22 PM - jbigler1986: So the e3d heat block probably wouldn't work then
Mar 23, 2015 at 11:23 PM - Mike Kelly: it might be possible if you can thread all the way to the end of the heatbrek
Mar 23, 2015 at 11:23 PM - Mike Kelly: but i think the wrench cuts make it difficult to thread
Mar 23, 2015 at 11:23 PM - jbigler1986: Not worth it. I will just order .6 nozzle and heating element if Matt has any
Mar 23, 2015 at 11:24 PM - jbigler1986: See if I can find hex heat block online
Mar 23, 2015 at 11:28 PM - jbigler1986: http://www.makerfarm.com/index.php/hot-ends/hot-end-parts/hexagon-heater-block.html
Mar 23, 2015 at 11:28 PM - Mike Kelly: for reference: http://i.imgur.com/alPKmnj.png
Mar 23, 2015 at 11:29 PM - jbigler1986: Hard to find just the heatblock
Mar 23, 2015 at 11:31 PM - jbigler1986: Might not be worth the hassle
Mar 23, 2015 at 11:31 PM - Mike Kelly: for the hex?
Mar 23, 2015 at 11:32 PM - jbigler1986: yeah. I just have the heatsink and nozzle that are good so was going to try and salvage it for a backup
Mar 23, 2015 at 11:33 PM - Mike Kelly: whats wrong with the makerfarm one
Mar 23, 2015 at 11:34 PM - jbigler1986: Nothing. Was trying to see if there were cheaper ones out there
Mar 23, 2015 at 11:38 PM - Mike Kelly: ah
Mar 23, 2015 at 11:40 PM - jbigler1986: Question for you. Will my print me way off by the end of the print if part of it come loose from the bed? http://www.ustream.tv/channel/jbigler1986 look at the front right. Ignore the looses tape (it's driving me crazy)
Mar 23, 2015 at 11:41 PM - Mike Kelly: yeah i was looking at it this morning, seemed to me like it would still be useable
Mar 23, 2015 at 11:41 PM - Mike Kelly: it should eventually resolve
Mar 23, 2015 at 11:41 PM - JeffTheMess: The print looks like it kinda leveled itself....since its straight
Mar 23, 2015 at 11:42 PM - jbigler1986: It just looked like the gap was getting bigger. Maybe that's just me
Mar 23, 2015 at 11:42 PM - Mike Kelly: it does look bigger to me
Mar 23, 2015 at 11:43 PM - jbigler1986: Will that continue or resolve?
Mar 23, 2015 at 11:44 PM - Mike Kelly: if it doesn't completely come unstuck it might be useable...
Mar 23, 2015 at 11:44 PM - Mike Kelly: i duno
Mar 23, 2015 at 11:44 PM - Mike Kelly: hard to say
Mar 23, 2015 at 11:48 PM - jbigler1986: Might have to go home on lunch and restart it
Mar 23, 2015 at 11:54 PM - jbigler1986: I am in last place in my bracket
Mar 23, 2015 at 11:54 PM - jbigler1986: Girl at work that picked teams based on their colors is in first
Mar 23, 2015 at 11:56 PM - Mike Kelly: hahahaha
Mar 23, 2015 at 11:56 PM - Mike Kelly: that's how you do it
Mar 23, 2015 at 11:57 PM - jbigler1986: Girl that is in 2nd picked teams with the shortest name. WTF
Mar 23, 2015 at 11:58 PM - Mike Kelly: well kentucky's pretty long
Mar 23, 2015 at 11:59 PM - jbigler1986: probably had cincy beating them or something. Not sure
Mar 24, 2015 at 12:00 AM - jbigler1986: This print baffles me. Seems like its warping but it's printing level. If that was ABS I would have had to stop it by now
Mar 24, 2015 at 12:07 AM - JeffTheMess: well think of it like this..if you hold a flat piece of plastic on three corners on an unleveled surface that fourth corner will be leveled regardless of how unleveled the bed may be
Mar 24, 2015 at 12:08 AM - JeffTheMess: you can try that now if your desk is unleveled with any straight object
Mar 24, 2015 at 12:09 AM - JeffTheMess: its not a flexible material where it falls due to gravity right
Mar 24, 2015 at 12:09 AM - Mike Kelly: what are you using for adhesion
Mar 24, 2015 at 12:10 AM - jbigler1986: Aquanet
Mar 24, 2015 at 12:10 AM - jbigler1986: I need to add a little piece of paper or something under the magnet.
Mar 24, 2015 at 12:11 AM - Mike Kelly: yeah could help
Mar 24, 2015 at 12:11 AM - Mike Kelly: i never really liked the nozzle probe method, the bed deflects too much and the sense point is too far away from the nozzle
Mar 24, 2015 at 12:12 AM - jbigler1986: Good test I suppose. Get some more tweaks solved. Lol
Mar 24, 2015 at 12:13 AM - Mike Kelly: http://www.kjmagnetics.com/proddetail.asp?prod=B111 omg it's so tiny ^_^
Mar 24, 2015 at 12:14 AM - jbigler1986: Wow
Mar 24, 2015 at 12:16 AM - jbigler1986: I want some. Cheap too
Mar 24, 2015 at 12:17 AM - Mike Kelly: what would you do with something that small
Mar 24, 2015 at 12:18 AM - jbigler1986: Embed them under my skin of course
Mar 24, 2015 at 12:19 AM - jbigler1986: Magnetic hands
Mar 24, 2015 at 12:19 AM - Mike Kelly: oh yes
Mar 24, 2015 at 12:20 AM - Mike Kelly: 6th sense
Mar 24, 2015 at 12:20 AM - jbigler1986: And feet
Mar 24, 2015 at 12:20 AM - jbigler1986: climb buildings with ease
Mar 24, 2015 at 12:21 AM - Mike Kelly: magnet man, magnet man, goes wherever a magnet can
Mar 24, 2015 at 12:22 AM - jbigler1986: lol
Mar 24, 2015 at 12:22 AM - Mike Kelly: http://www.amazon.com/MyMagnetMan®-...1427210575&sr=1-55&keywords=neodymium+magnets
Mar 24, 2015 at 12:23 AM - Mike Kelly: we can go smaller...
Mar 24, 2015 at 12:23 AM - jbigler1986: No we are talking
Mar 24, 2015 at 12:23 AM - jbigler1986: now*
Mar 24, 2015 at 12:27 AM - Mike Kelly: it's surprisingly difficult to find a 1" x 3/8" x 1/8" neodymium magnet on amazon
Mar 24, 2015 at 12:34 AM - jbigler1986: Seems like the print gap has stopped increasing. Gonna let it ride
Mar 24, 2015 at 12:40 AM - jbigler1986: Did you get your wiring parts yet
Mar 24, 2015 at 12:42 AM - Mike Kelly: not yet
Mar 24, 2015 at 12:42 AM - Mike Kelly: it's coming USPS so who knows

 

Mar 24, 2015 at 12:42 AM - Mike Kelly: est thursday
Mar 24, 2015 at 12:48 AM - jbigler1986: Lol. It's possible
Mar 24, 2015 at 12:49 AM - jbigler1986: They suck at updating their site
Mar 24, 2015 at 12:50 AM - Mike Kelly: yeah
Mar 24, 2015 at 12:50 AM - Mike Kelly: really they suck at everything, i hate the usps
Mar 24, 2015 at 12:53 AM - Stephen Capistron: favorite magnet story ...
Mar 24, 2015 at 12:53 AM - Stephen Capistron: http://www.cnn.com/2012/08/04/health/divricean-magnet-surgery/
Mar 24, 2015 at 12:57 AM - Mike Kelly: that's crazy
Mar 24, 2015 at 1:03 AM - Mike Glass: Morning
Mar 24, 2015 at 1:04 AM - Mike Kelly: howdy
Mar 24, 2015 at 1:06 AM - Mike Glass: how do you crimp on those connectors Mike?
Mar 24, 2015 at 1:06 AM - Mike Glass: or do the pins just push in after you crimp them.
Mar 24, 2015 at 1:06 AM - Mike Kelly: crimping tool
Mar 24, 2015 at 1:08 AM - Mike Glass: D-style crimper?
Mar 24, 2015 at 1:09 AM - Mike Glass: I have some 232 crimp connectors, just dont have a crimper.
Mar 24, 2015 at 1:11 AM - JeffTheMess: crimper aka pliers with attitude
Mar 24, 2015 at 1:11 AM - Mike Kelly: http://www.amazon.com/gp/product/B002AVVO7K/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Mar 24, 2015 at 1:11 AM - Mike Kelly: though that one's too small really
Mar 24, 2015 at 1:11 AM - Mike Kelly: the largest size barely works
Mar 24, 2015 at 1:13 AM - Mike Glass: 9 Pin or 15 pin? for what your using
Mar 24, 2015 at 1:13 AM - Mike Kelly: 15 but i also used it to crimp the 9 pin
Mar 24, 2015 at 1:13 AM - Mike Kelly: this is all low current stuff like fans and switches
Mar 24, 2015 at 1:14 AM - Mike Glass: I thought you had your hotend on there as well.
Mar 24, 2015 at 1:14 AM - Mike Kelly: i do, that's on the 9 pin
Mar 24, 2015 at 1:14 AM - Mike Kelly: since those are rated to higher current
Mar 24, 2015 at 1:15 AM - Mike Kelly: iirc 5A per pin
Mar 24, 2015 at 1:15 AM - Mike Kelly: the HD15 pins are rated to 2A
Mar 24, 2015 at 1:16 AM - jbigler1986: Not an electrical fan
Mar 24, 2015 at 1:16 AM - Mike Glass: Ok I thought they were both 9 pin.
Mar 24, 2015 at 1:16 AM - Mike Kelly: na i needed something like 20 pins
Mar 24, 2015 at 1:16 AM - Mike Kelly: so i had to use an HD15 and DB9
Mar 24, 2015 at 1:16 AM - Mike Glass: holy hell, oh you have the leveler also
Mar 24, 2015 at 1:17 AM - Mike Kelly: yeah that takes 4 pins
Mar 24, 2015 at 1:17 AM - Mike Kelly: 2 power, 2 switch
Mar 24, 2015 at 1:17 AM - Mike Glass: THis looks nice http://www.moddiy.com/products/Professional-Molex-Crimping-Tool.html
Mar 24, 2015 at 1:17 AM - Mike Kelly: that does look real nice
Mar 24, 2015 at 1:18 AM - Mike Kelly: damn you and your finding things i want to buy
Mar 24, 2015 at 1:19 AM - Mike Glass: amazon for $19
Mar 24, 2015 at 1:19 AM - jbigler1986: http://www.rosebrides.com/brides/olya-379323.html
Mar 24, 2015 at 1:19 AM - Mike Kelly: link?
Mar 24, 2015 at 1:20 AM - jbigler1986: Adding to the list of things you want to buy. Lol
Mar 24, 2015 at 1:20 AM - Mike Kelly: are you looking for a russian mail order bride
Mar 24, 2015 at 1:21 AM - Mike Glass: http://www.amazon.com/Iwiss-Crimpin...ie=UTF8&qid=1427214059&sr=1-1&keywords=SN-28B
Mar 24, 2015 at 1:21 AM - jbigler1986: Is that stuff actually real? Do creepers do that
Mar 24, 2015 at 1:22 AM - Mike Kelly: yes
Mar 24, 2015 at 1:22 AM - jbigler1986: Nice. I need to do that. My wiring looks like a 10 year old did it. Minus the soldering part
Mar 24, 2015 at 1:22 AM - Mike Kelly: mike, aren't those smaller?
Mar 24, 2015 at 1:23 AM - Mike Glass: nope same exact spects
Mar 24, 2015 at 1:23 AM - Mike Glass: AWG: 28 to 16 (0.1-1.0 mm² Capacity)
Mar 24, 2015 at 1:24 AM - Mike Glass: it says to 18 awg but in mm its the same spec..?
Mar 24, 2015 at 1:25 AM - Mike Glass: 0.1-1.0m㎡ the one on amazon
Mar 24, 2015 at 1:25 AM - Mike Kelly: if the one i linked goes from 1.0 to 1.9mm how does that one go from 0.1-1.0mm^2
Mar 24, 2015 at 1:25 AM - Mike Kelly: i'm confused
Mar 24, 2015 at 1:25 AM - Mike Kelly: cause that one looks bigger but it goes to 1?
Mar 24, 2015 at 1:26 AM - Mike Glass: 1.9 I dont see that
Mar 24, 2015 at 1:26 AM - Mike Kelly: http://www.amazon.com/gp/product/B002AVVO7K/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Mar 24, 2015 at 1:26 AM - Mike Glass: haha I dont know..
Mar 24, 2015 at 1:27 AM - Mike Kelly: ok well you buy those and then lemme know how big the openings are
Mar 24, 2015 at 1:27 AM - Mike Glass: you say the 1.9 is to small?
Mar 24, 2015 at 1:29 AM - Mike Kelly: i mean it works but it's the biggest one and sometimes the connectors get a little stuck in it
Mar 24, 2015 at 1:29 AM - Mike Kelly: 2.0 seems like ti would be the sweet spot
Mar 24, 2015 at 1:30 AM - Mike Glass: yea thats what the review is saying
Mar 24, 2015 at 1:30 AM - Mike Glass: screw crimping then.. http://www.amazon.com/5sd-Terminal-...d_sim_e_4?ie=UTF8&refRID=06RR11HQFQAXETWAC6YY
Mar 24, 2015 at 1:31 AM - Mike Kelly: haha
Mar 24, 2015 at 1:31 AM - Mike Kelly: this one says "Standard molex" which are big
Mar 24, 2015 at 1:31 AM - Mike Kelly: so i think it's larger
Mar 24, 2015 at 1:31 AM - jbigler1986: Not a horrible idea MG
Mar 24, 2015 at 1:32 AM - Mike Kelly: screw it i'm gonna buy that one
Mar 24, 2015 at 1:33 AM - Mike Glass: I see it now at the top doh..2.54mm 3.96mm
Mar 24, 2015 at 1:34 AM - Mike Kelly: ohhh those are the sizes
Mar 24, 2015 at 1:34 AM - Mike Kelly: i thought that was like pin spacing, derp
Mar 24, 2015 at 1:34 AM - Mike Kelly: ok well now i have a big one and a small one, so i should be good
Mar 24, 2015 at 1:34 AM - Mike Glass: Yea I might order that one too, seems to be the standard size for molex.
Mar 24, 2015 at 1:38 AM - Mike Kelly: Yeah that's what the review said. I need some connectors that plug into board pins
Mar 24, 2015 at 1:38 AM - Mike Kelly: I bought some DuPont connectors but they don't seat on pins for some stupid reason
Mar 24, 2015 at 1:42 AM - jbigler1986: print still going strong. added a few drops of oil to the oiler for this bad boy. I think 9 hours is my longest so far
Mar 24, 2015 at 1:42 AM - jbigler1986: This will more than double that
Mar 24, 2015 at 1:43 AM - jbigler1986: What is your guys' longest print
Mar 24, 2015 at 1:43 AM - Mike Glass: two of these should work Mike. http://www.vetco.net/catalog/product_info.php?products_id=9627
Mar 24, 2015 at 1:44 AM - Mike Kelly: on my robo?
Mar 24, 2015 at 1:45 AM - jbigler1986: yeah
Mar 24, 2015 at 1:45 AM - Mike Glass: anybody, 14 amp rating
Mar 24, 2015 at 1:46 AM - Mike Kelly: i think my longest is like 12 hours, i don't trust my robo that much
Mar 24, 2015 at 1:46 AM - Mike Kelly: i did a 67 hour print on the 2x though
Mar 24, 2015 at 1:46 AM - Mike Glass: holy hell
Mar 24, 2015 at 1:46 AM - Mike Kelly: yeah that thing is a hoss
Mar 24, 2015 at 1:47 AM - jbigler1986: wow. if i did this on .4 nozzle it would have been like 36 hours. I said no thanks
Mar 24, 2015 at 1:48 AM - Mike Glass: Think my longest print is 8 hours
Mar 24, 2015 at 1:49 AM - Mike Glass: but have printed non-stop for 36 hours
Mar 24, 2015 at 1:51 AM - jbigler1986: do you ever not have your .8 nozzle on?
Mar 24, 2015 at 1:52 AM - Mike Glass: Right now I have the .4 on for the cnc parts, gonna be a few more days of non stop printing.
Mar 24, 2015 at 1:55 AM - jbigler1986: About to order a .6
Mar 24, 2015 at 1:56 AM - nikhil bhansali: anyone here..?
Mar 24, 2015 at 1:56 AM - nikhil bhansali: facing a weird weird issue
Mar 24, 2015 at 1:56 AM - nikhil bhansali: with my robo 3d..
Mar 24, 2015 at 1:56 AM - nikhil bhansali: https://www.dropbox.com/s/g3oitwf8cs02zhs/X assembly bending on one threaded rod.mp4?dl=0
Mar 24, 2015 at 1:56 AM - nikhil bhansali: am sending this link to tech support as well
Mar 24, 2015 at 1:56 AM - nikhil bhansali: but wanted to ask if anyone else was facing this issue
Mar 24, 2015 at 1:57 AM - jbigler1986: Hey MG or MK I will pay you to make connectors for my robo for the heating element, fans and thermistor
Mar 24, 2015 at 1:58 AM - jbigler1986: Try lubing the rods

 

Mar 24, 2015 at 1:59 AM - nikhil bhansali: tried...
Mar 24, 2015 at 1:59 AM - jbigler1986: What happens when you move the carriage to the center?
Mar 24, 2015 at 1:59 AM - nikhil bhansali: same thing
Mar 24, 2015 at 1:59 AM - Mike Glass: im your spinning your threaded rod in the HC connector
Mar 24, 2015 at 2:00 AM - nikhil bhansali: HC?
Mar 24, 2015 at 2:00 AM - Mike Glass: you need to tighten the two hex on the HC, the silver thing connecting the rods
Mar 24, 2015 at 2:00 AM - Mike Kelly: doesn't your printer already have connectors
Mar 24, 2015 at 2:01 AM - Mike Kelly: nikil your helical coupler on the left side is loose
Mar 24, 2015 at 2:01 AM - jbigler1986: The new wires from the e3d didn't
Mar 24, 2015 at 2:01 AM - jbigler1986: ^^^^ THe left one is loose
Mar 24, 2015 at 2:02 AM - nikhil bhansali: checked both couplers
Mar 24, 2015 at 2:02 AM - nikhil bhansali: very firm
Mar 24, 2015 at 2:02 AM - jbigler1986: I would send you a heating element and thermistor to make connectors for
Mar 24, 2015 at 2:03 AM - nikhil bhansali: and for some reason the issue occurs only when the assembly is moving down
Mar 24, 2015 at 2:03 AM - nikhil bhansali: no issue while it is going up.
Mar 24, 2015 at 2:03 AM - Mike Kelly: it's definitely loose man, i can see it spinning but the threaded rod isn't
Mar 24, 2015 at 2:03 AM - jbigler1986: I see it too
Mar 24, 2015 at 2:04 AM - nikhil bhansali: ok will check once agaun
Mar 24, 2015 at 2:04 AM - nikhil bhansali: *again
Mar 24, 2015 at 2:04 AM - Mike Kelly: grab the helical coupler and spin the rod
Mar 24, 2015 at 2:04 AM - nikhil bhansali: anything else i should look at?
Mar 24, 2015 at 2:05 AM - nikhil bhansali: I mean any other component which you guys feel may be loose?
Mar 24, 2015 at 2:05 AM - Mike Kelly: no
Mar 24, 2015 at 2:05 AM - nikhil bhansali: great!
Mar 24, 2015 at 2:05 AM - Mike Kelly: it's quite clearly the helical
Mar 24, 2015 at 2:05 AM - nikhil bhansali: thanks a lot for the help! (Y)
Mar 24, 2015 at 2:06 AM - nikhil bhansali: will check immediately
Mar 24, 2015 at 2:06 AM - Mike Kelly: sure, gl
Mar 24, 2015 at 2:06 AM - Mike Kelly: if you can't get it tight, pull out the threaded rod and add some teflon tape to the bottom
Mar 24, 2015 at 2:07 AM - Mike Kelly: it could also be that it's binded and needs lubrication, but looking at the movement of the helical couplers that seems unlikely
Mar 24, 2015 at 2:08 AM - nikhil bhansali: ok
Mar 24, 2015 at 2:11 AM - nikhil bhansali: yup you are right the coupler seems loose..
Mar 24, 2015 at 2:12 AM - nikhil bhansali: how should i tighten it?
Mar 24, 2015 at 2:12 AM - Mike Glass: allen wrench that came with the robo
Mar 24, 2015 at 2:13 AM - Mike Glass: I also put a drop of super glue on mine.
Mar 24, 2015 at 2:13 AM - nikhil bhansali: oh
Mar 24, 2015 at 2:13 AM - nikhil bhansali: ok
Mar 24, 2015 at 2:13 AM - Mike Kelly: even when i've done absolutely nothing wrong, the police still make me nervous
Mar 24, 2015 at 2:14 AM - Mike Glass: They came to visit?
Mar 24, 2015 at 2:14 AM - Mike Kelly: yeah they just walked in from our shop, not sure why
Mar 24, 2015 at 2:15 AM - jbigler1986: Yeah I hate that myself. I hate driving with one behind me too. Can't explain it
Mar 24, 2015 at 2:16 AM - jbigler1986: Could it be the 3 kilo's of coke I have in my trunk? Maybe
Mar 24, 2015 at 2:16 AM - Mike Kelly: i went to a catholic school and some super religious mom told us that if our parents feel guilty when they see a cop they're bad people
Mar 24, 2015 at 2:16 AM - Mike Kelly: i was like "wtf is wrong with you"
Mar 24, 2015 at 2:17 AM - jbigler1986: WTF. Some people have issues.
Mar 24, 2015 at 2:17 AM - Mike Glass: Your a badass Mike admit it..lol
Mar 24, 2015 at 2:17 AM - Mike Kelly: oh yeah, total badass
Mar 24, 2015 at 2:18 AM - Mike Kelly: man i'm hungry today
Mar 24, 2015 at 2:19 AM - jbigler1986: it's the mohawk and cut off sleeve leather jacket that does it for you
Mar 24, 2015 at 2:19 AM - Mike Glass: I know, its only 20 after 11 im starving
Mar 24, 2015 at 2:23 AM - Mike Kelly: 3 weeks till NHL playoffs
Mar 24, 2015 at 2:23 AM - Mike Kelly: woop
Mar 24, 2015 at 2:24 AM - jbigler1986: I can't get into NHL
Mar 24, 2015 at 2:24 AM - jbigler1986: 1 week for Vaca
Mar 24, 2015 at 2:24 AM - Mike Kelly: it's my favorite sport
Mar 24, 2015 at 2:24 AM - Mike Kelly: though CFB is a close second
Mar 24, 2015 at 2:25 AM - jbigler1986: I like college sports in generally. They don't have ego's and stuff like pros. They are playing to try to make it pro
Mar 24, 2015 at 2:26 AM - BryZad: Hey Mike G you around ?
Mar 24, 2015 at 2:27 AM - BryZad: hey Mike K thanks for like and post on my build thread it is coming along pretty well
Mar 24, 2015 at 2:27 AM - Mike Glass: yea bry
Mar 24, 2015 at 2:28 AM - Mike Glass: JB you going anywhere for vaca/
Mar 24, 2015 at 2:29 AM - nikhil bhansali: hey guys thanks a lot! simply tightening my coupler fixed the issue!
Mar 24, 2015 at 2:31 AM - BryZad: hey glass you wanted to see my prop build I posted updates on the shotgun build
Mar 24, 2015 at 2:31 AM - Mike Glass: good job nikhil
Mar 24, 2015 at 2:32 AM - jbigler1986: Yeah. Renting a cabin in the smokies
Mar 24, 2015 at 2:33 AM - Mike Glass: effin sweet Bry
Mar 24, 2015 at 2:34 AM - jbigler1986: It's like the only place I haven't been yet.
Mar 24, 2015 at 2:34 AM - jbigler1986: Still gotta work for a few hours a day though. Uggg
Mar 24, 2015 at 2:35 AM - jbigler1986: Just going to do it before everyone else wakes up
Mar 24, 2015 at 2:35 AM - Mike Glass: You taking your Robo?
Mar 24, 2015 at 2:36 AM - jbigler1986: lol. No
Mar 24, 2015 at 2:36 AM - jbigler1986: Wife would kill me
Mar 24, 2015 at 2:37 AM - Mike Glass: you going to Gatlinburg
Mar 24, 2015 at 2:37 AM - BryZad: thank Mike I think it is coming together well
Mar 24, 2015 at 2:37 AM - Mike Glass: lookin like a real gun
Mar 24, 2015 at 2:38 AM - jbigler1986: Yes we are
Mar 24, 2015 at 2:39 AM - Mike Glass: you gonna see Ripley's Aquarium Of The Smokies
Mar 24, 2015 at 2:39 AM - jbigler1986: We are going there
Mar 24, 2015 at 2:40 AM - Mike Glass: man I must have espn or something
Mar 24, 2015 at 2:41 AM - jbigler1986: The lady we are renting from said last time she stayed there a bear was going through her trash. I said awesome. Bear meat and hide
Mar 24, 2015 at 2:43 AM - Mike Glass: bear is a bit grissily though
Mar 24, 2015 at 2:43 AM - Mike Glass: but the hide would be nice
Mar 24, 2015 at 2:44 AM - jbigler1986: Never had bear
Mar 24, 2015 at 2:45 AM - Mike Kelly: jb that's why i like college as well, pro's just play to keep playing, they don't always care about winning
Mar 24, 2015 at 2:46 AM - Mike Kelly: seems like they only ever play at like 75%
Mar 24, 2015 at 2:47 AM - Mike Kelly: my coworker brought in some bear jerky
Mar 24, 2015 at 2:47 AM - Mike Kelly: i preferred it over elk
Mar 24, 2015 at 2:47 AM - jbigler1986: interesting
Mar 24, 2015 at 2:50 AM - jbigler1986: This orange prints really well
Mar 24, 2015 at 2:51 AM - Mike Glass: except for the warping
Mar 24, 2015 at 2:51 AM - Mike Kelly: lol
Mar 24, 2015 at 2:52 AM - jbigler1986: That was my own fault
Mar 24, 2015 at 2:52 AM - Mike Glass: wth is with the tape
Mar 24, 2015 at 2:53 AM - Mike Glass: wires not long enough?
Mar 24, 2015 at 2:53 AM - Mike Kelly: he's too lazy to use heat shrink
Mar 24, 2015 at 2:53 AM - jbigler1986: shhhhh
Mar 24, 2015 at 2:53 AM - jbigler1986: I didn't have any at the time
Mar 24, 2015 at 2:54 AM - jbigler1986: I do now. Just haven't fixed it
Mar 24, 2015 at 2:54 AM - Mike Kelly: that's what they all say
Mar 24, 2015 at 2:54 AM - jbigler1986: I will send you a pic when I get home

 

Mar 24, 2015 at 2:54 AM - jbigler1986: Bought it saturaday
Mar 24, 2015 at 2:54 AM - jbigler1986: saturday*
Mar 24, 2015 at 2:54 AM - jbigler1986: Wait
Mar 24, 2015 at 2:54 AM - jbigler1986: Friday
Mar 24, 2015 at 2:55 AM - BryZad: ha ha
Mar 24, 2015 at 2:56 AM - jbigler1986: So yeah. You could say to lazy to fix it. Or I didn't want to stop printing to fix it.
Mar 24, 2015 at 2:56 AM - jbigler1986: Let's go with the 2nd one
Mar 24, 2015 at 2:57 AM - Mike Kelly: lol
Mar 24, 2015 at 3:00 AM - Mike Kelly: jb did you take any pictures from the festival
Mar 24, 2015 at 3:01 AM - jbigler1986: I didn't go. My son broke his finger learning to ride his bike. Sucked
Mar 24, 2015 at 3:02 AM - jbigler1986: Hopefully something comes to chicago so I can go
Mar 24, 2015 at 3:02 AM - jbigler1986: Because that's about the same distance
Mar 24, 2015 at 3:07 AM - Mike Kelly: ouch
Mar 24, 2015 at 3:07 AM - Stephen Capistron: Did you rint him a finger splint?
Mar 24, 2015 at 3:07 AM - jbigler1986: Printed one. Duh
Mar 24, 2015 at 3:08 AM - jbigler1986: No. They "gave" him one
Mar 24, 2015 at 3:15 AM - Mike Kelly: do people make these kinds of sheets of wood, or do they sell it like that?
Mar 24, 2015 at 3:19 AM - Mike Glass: chip board?
Mar 24, 2015 at 3:21 AM - Mike Kelly: na like, the square edges, i guess they just take framing lumber and trim it
Mar 24, 2015 at 3:22 AM - Mike Glass: thats blue stain pine, that what I have an unlimited supply of.
Mar 24, 2015 at 3:23 AM - Mike Kelly: do you buy from a lumberyard or what
Mar 24, 2015 at 3:24 AM - Mike Glass: Nope the company that my friend just started has his own mill, I get the lumber free for the signs I built him.
Mar 24, 2015 at 3:25 AM - Mike Glass: We have several mills around that will sell it.
Mar 24, 2015 at 3:25 AM - Mike Kelly: nice
Mar 24, 2015 at 3:25 AM - Mike Kelly: i really want to start making things, i just know absolutely nothing about woods
Mar 24, 2015 at 3:25 AM - Mike Glass: its all the beetle kill the people have to cut down due to fire hazard.
Mar 24, 2015 at 3:26 AM - Mike Kelly: right
Mar 24, 2015 at 3:26 AM - Mike Kelly: we got tons of that
Mar 24, 2015 at 3:26 AM - Mike Kelly: is that good to work with?
Mar 24, 2015 at 3:26 AM - Mike Kelly: the first thing i want to make is a foot stool
Mar 24, 2015 at 3:27 AM - Mike Kelly: i'm kinda thinking about just using some 2x4 i have
Mar 24, 2015 at 3:28 AM - Mike Glass: I love it, some of it is tough but its not like super soft either
Mar 24, 2015 at 3:29 AM - Mike Glass: I just did 3 signs in it this week. I can post in a few.
Mar 24, 2015 at 3:30 AM - Mike Kelly: sweet
Mar 24, 2015 at 3:30 AM - Mike Kelly: i've been working since sunday on adding paneling to the underside of our awning
Mar 24, 2015 at 3:33 AM - Mike Glass: what kind of paneling?
Mar 24, 2015 at 3:35 AM - Mike Kelly: http://i.imgur.com/0elumLx.jpg
Mar 24, 2015 at 3:36 AM - Mike Glass: how thick is it.
Mar 24, 2015 at 3:36 AM - Mike Glass: http://imgur.com/70ZvT3n http://imgur.com/AzOKKIw
Mar 24, 2015 at 3:36 AM - Mike Kelly: http://www.homedepot.com/p/Unbranded-14-sq-ft-Western-Cedar-Planks-6-Pack-8203015/202106509
Mar 24, 2015 at 3:36 AM - Mike Kelly: like 3/8"
Mar 24, 2015 at 3:37 AM - Mike Kelly: i have it spaced off the compressed board with 1x2 since there's nails poking through
Mar 24, 2015 at 3:37 AM - Mike Glass: I took pics this morning in a rush so not that great.
Mar 24, 2015 at 3:37 AM - Mike Kelly: looks nice
Mar 24, 2015 at 3:38 AM - Mike Kelly: so i was working on the paneling and cutting them to 22 3/8"
Mar 24, 2015 at 3:38 AM - Mike Kelly: using my table saw with the rip fence
Mar 24, 2015 at 3:38 AM - Mike Kelly: and i ask my brother in law to help
Mar 24, 2015 at 3:38 AM - Mike Kelly: and he refused to use the rip fence
Mar 24, 2015 at 3:38 AM - Mike Kelly: saying it would kick back on him
Mar 24, 2015 at 3:38 AM - Mike Kelly: and how i was wrong
Mar 24, 2015 at 3:39 AM - Mike Kelly: so he starts using the mitering tool to push it forward on the 90
Mar 24, 2015 at 3:39 AM - Mike Kelly: but that's taking forever so i get him a circular saw so i could use the table saw to cut the 1x2
Mar 24, 2015 at 3:39 AM - Mike Kelly: well he cuts like 10 of them
Mar 24, 2015 at 3:40 AM - Mike Kelly: to 22 1/8"
Mar 24, 2015 at 3:40 AM - Mike Kelly: i was like "ok you're done"
Mar 24, 2015 at 3:40 AM - Mike Kelly: he's one of those people who always has to be right, even when he's wrong
Mar 24, 2015 at 3:41 AM - Mike Kelly: it's like "what do you think a rip fence is for"
Mar 24, 2015 at 3:41 AM - Mike Glass: doh
Mar 24, 2015 at 3:42 AM - Mike Kelly: i just wanna show him the users manual on how to use the rip fence
Mar 24, 2015 at 3:42 AM - Mike Kelly: but he wouldn't care
Mar 24, 2015 at 3:42 AM - Mike Glass: Must be rocket science to some people
Mar 24, 2015 at 3:42 AM - Mike Kelly: really annoying
Mar 24, 2015 at 3:42 AM - Mike Kelly: it's not a big deal because i'm gonna add trim anyways
Mar 24, 2015 at 3:42 AM - Mike Kelly: but ugh, some peopel
Mar 24, 2015 at 3:45 AM - Stephen Capistron: Ideally for a cross cut you would use a miter guide / sled
Mar 24, 2015 at 3:46 AM - Stephen Capistron: If they all needed to be the same length, a sled would have been super fast
Mar 24, 2015 at 3:58 AM - Mike Kelly: good to know
Mar 24, 2015 at 4:00 AM - jbigler1986: BLAH
Mar 24, 2015 at 4:01 AM - Mike Kelly: i still got like 230 more pieces to cut so i might jig up a sled
Mar 24, 2015 at 4:02 AM - jbigler1986: That's alot
Mar 24, 2015 at 4:02 AM - Mike Kelly: yeah each row uses 34 and i have 7 more to do
Mar 24, 2015 at 4:04 AM - Stephen Capistron: Not like I really need to tell you, but youtube should have some good ideas for you
Mar 24, 2015 at 4:04 AM - Mike Kelly: this seems fairly basic
Mar 24, 2015 at 4:06 AM - Stephen Capistron: yup, put a little block stop at the length you need and go to town
Mar 24, 2015 at 4:07 AM - Mike Kelly: i was also watching a video where a guy made a rip fence that stopped halfway though the blade so it gave the piece somewhere to go after the cut
Mar 24, 2015 at 4:15 AM - Mike Kelly: should i make a fence?
Mar 24, 2015 at 4:17 AM - Stephen Capistron: stick with the sled
Mar 24, 2015 at 4:23 AM - Mike Kelly: this guy has insane tools
Mar 24, 2015 at 4:27 AM - jbigler1986: That's a nice shop
Mar 24, 2015 at 4:47 AM - Mike Kelly: man there's just an insane amount of stuff to know for wood working
Mar 24, 2015 at 4:48 AM - jbigler1986: Yeah. One of my buddy's dad has a killer shop. I haven't look into it at all. Love the smell of fresh cut wood though.
Mar 24, 2015 at 4:48 AM - Stephen Capistron: that is a crazy shop
Mar 24, 2015 at 4:49 AM - jbigler1986: You can make some killer money with it too
Mar 24, 2015 at 4:49 AM - Stephen Capistron: wood dust can actually be pretty bad for you
Mar 24, 2015 at 4:51 AM - jbigler1986: What isn't bad for you nowadays
Mar 24, 2015 at 4:58 AM - toy: get on of these http://www.amazon.com/Jet-DC-1100VX-CK-Collector-230-Volt-2-Micron/dp/B004T86NAK
Mar 24, 2015 at 5:04 AM - Mike Kelly: man i wanna make something now but i gotta model
Mar 24, 2015 at 5:04 AM - Mike Kelly: woe is me
Mar 24, 2015 at 5:08 AM - toy: im gonna turn my wells index into a 4 axis mill instread of building a new machine
Mar 24, 2015 at 5:09 AM - Mike Kelly: sick
Mar 24, 2015 at 5:09 AM - toy: drop the z axis table as low as it will go build a new x-y on top of the old bed
Mar 24, 2015 at 5:09 AM - toy: its to much of pain and $$$ to replace the acme threaded rod withnew shafting
Mar 24, 2015 at 5:10 AM - toy: maybe i can make my own hotends
Mar 24, 2015 at 5:12 AM - thesnomonster: hello all
Mar 24, 2015 at 5:12 AM - jbigler1986: Hello
Mar 24, 2015 at 5:12 AM - Mike Kelly: welcome back
Mar 24, 2015 at 5:12 AM - thesnomonster: looks like we got a makeover
Mar 24, 2015 at 5:12 AM - Mike Kelly: yeah you missed the fun part
Mar 24, 2015 at 5:12 AM - thesnomonster: LOL i bet
Mar 24, 2015 at 5:14 AM - toy: howdy, hows the router coming snow?

 

Mar 24, 2015 at 5:15 AM - jbigler1986: Oh MK the v5 and v6 heat block does work with hex heatsink/heat break
Mar 24, 2015 at 5:16 AM - thesnomonster: catastrophic ended up cause a bunch of probs with the wife so its in a box for now..
Mar 24, 2015 at 5:17 AM - Mike Kelly: i showed you a picture earlier of a potential arangement
Mar 24, 2015 at 5:17 AM - toy: oh no
Mar 24, 2015 at 5:17 AM - Mike Kelly: bummer man
Mar 24, 2015 at 5:17 AM - Mike Kelly: hopefully you let her out soon
Mar 24, 2015 at 5:17 AM - toy: the wife?
Mar 24, 2015 at 5:18 AM - Mike Kelly: i'll see myself out
Mar 24, 2015 at 5:18 AM - thesnomonster: lol.. wouldnt mind honestly... but either way im back to printing again.
Mar 24, 2015 at 5:18 AM - thesnomonster: and awesome with the new cura do i need to find my Z offset again.
Mar 24, 2015 at 5:19 AM - toy: mike what pic?
Mar 24, 2015 at 5:19 AM - Mike Kelly: http://i.imgur.com/alPKmnj.png
Mar 24, 2015 at 5:20 AM - jbigler1986: I must have missed that pic. Thanks though
Mar 24, 2015 at 5:20 AM - toy: nice, https://www.google.com/search?q=wel...A%2F%2Fwww.nsmachine.com%2F12583.html;500;667
Mar 24, 2015 at 5:20 AM - toy: my mill looks close to that
Mar 24, 2015 at 5:21 AM - toy: i think with a 4th axis i can machines thoses
Mar 24, 2015 at 5:22 AM - Mike Kelly: i still wanna convert one of our mills into a CNC
Mar 24, 2015 at 5:22 AM - Mike Kelly: don't think the boss would go for that though
Mar 24, 2015 at 5:22 AM - toy: buy your own used mill
Mar 24, 2015 at 5:22 AM - toy: and convert
Mar 24, 2015 at 5:23 AM - toy: probably get a mill for 5k and another 5k for 4th axis cnc
Mar 24, 2015 at 5:23 AM - Mike Kelly: oh ok
Mar 24, 2015 at 5:23 AM - Mike Kelly: i'm sure the wife will approve that PO
Mar 24, 2015 at 5:23 AM - toy: investment
Mar 24, 2015 at 5:24 AM - toy: i paid 10k for my wells index about 10 years ago
Mar 24, 2015 at 5:25 AM - Mike Kelly: i'd also need a much bigger house
Mar 24, 2015 at 5:25 AM - toy: it does take up about 40sqft
Mar 24, 2015 at 5:26 AM - toy: imagine all the stuff u could make with a 4/5 axis mill
Mar 24, 2015 at 5:27 AM - Mike Kelly: haha
Mar 24, 2015 at 5:27 AM - Mike Kelly: a lot
Mar 24, 2015 at 5:27 AM - Mike Kelly: but i mean i already have access to one
Mar 24, 2015 at 5:27 AM - Mike Kelly: don't really need my own
Mar 24, 2015 at 5:27 AM - toy:
Mar 24, 2015 at 5:29 AM - Mike Kelly: that's amazing
Mar 24, 2015 at 5:29 AM - Mike Kelly: i bet programming that tool path took forever
Mar 24, 2015 at 5:29 AM - toy: i bet, the surface finish looks amazing
Mar 24, 2015 at 5:32 AM - jbigler1986: Yes it does.
Mar 24, 2015 at 5:34 AM - thesnomonster: cura error "heated bed temp switch turned off" any ideas
Mar 24, 2015 at 5:35 AM - jbigler1986: Never seen that one. Loose wire
Mar 24, 2015 at 5:35 AM - thesnomonster: says its hitting the max temp around 80c
Mar 24, 2015 at 5:36 AM - Mike Kelly: 85C is the max temp
Mar 24, 2015 at 5:36 AM - Mike Kelly: you have a ribbon cable model right?
Mar 24, 2015 at 5:36 AM - thesnomonster: no like 4 wire
Mar 24, 2015 at 5:36 AM - Mike Kelly: oh
Mar 24, 2015 at 5:36 AM - Mike Kelly: with a connector?
Mar 24, 2015 at 5:36 AM - thesnomonster: no
Mar 24, 2015 at 5:36 AM - jbigler1986: What temp are you setting it to
Mar 24, 2015 at 5:37 AM - thesnomonster: 90, where i have been for past 5 months.. lol
Mar 24, 2015 at 5:37 AM - jbigler1986: Edit firmware. It's probably set to 85 max
Mar 24, 2015 at 5:44 AM - Mike Kelly: bah i'm getting stir crazy
Mar 24, 2015 at 5:46 AM - thesnomonster: watch my channel, sit back and enjoy some music, getting ready to change it
Mar 24, 2015 at 5:47 AM - jbigler1986: what are you printing
Mar 24, 2015 at 5:48 AM - thesnomonster: bottle rocket cone
Mar 24, 2015 at 5:48 AM - thesnomonster: parachute type
Mar 24, 2015 at 5:49 AM - jbigler1986: link to your channel?
Mar 24, 2015 at 5:49 AM - thesnomonster: http://vaughnlive.tv/lets3dprint
Mar 24, 2015 at 5:49 AM - thesnomonster: haha
Mar 24, 2015 at 5:49 AM - thesnomonster: that was fast
Mar 24, 2015 at 5:49 AM - jbigler1986: nvm lol
Mar 24, 2015 at 5:51 AM - Mike Kelly: are you still running a single nozzle
Mar 24, 2015 at 5:51 AM - thesnomonster: yeah i paused everything for that stupid routertable
Mar 24, 2015 at 5:52 AM - thesnomonster: so i still need a 17 motor and some tubing, and an adapter for cold end.
Mar 24, 2015 at 5:52 AM - Mike Kelly: gotcha
Mar 24, 2015 at 5:54 AM - jbigler1986: pretty pink carriage. I like it
Mar 24, 2015 at 5:57 AM - thesnomonster: it was voted by the gentle here...
Mar 24, 2015 at 5:57 AM - thesnomonster: gentleman**
Mar 24, 2015 at 5:58 AM - jbigler1986: man bowden setup looks so much cleaner
Mar 24, 2015 at 5:59 AM - Mike Kelly: he's pretty in pink
Mar 24, 2015 at 5:59 AM - thesnomonster: it was hard to get setup.. im going to eventually print it in black or gray
Mar 24, 2015 at 6:01 AM - thesnomonster: that new fan is amazing
Mar 24, 2015 at 6:01 AM - thesnomonster: no probs so far..
Mar 24, 2015 at 6:09 AM - Mike Kelly: someone suggested i do this for the carriage: http://community.robo3d.com/index.php?attachments/coling-fan-screw-bosses-jpg.6766/
Mar 24, 2015 at 6:09 AM - Mike Kelly: maybe you can't see that
Mar 24, 2015 at 6:17 AM - thesnomonster: cant see
Mar 24, 2015 at 6:17 AM - thesnomonster: is there a way to slow down print speed during a print?
Mar 24, 2015 at 6:18 AM - Mike Kelly: http://i.imgur.com/kCL6YxP.png
Mar 24, 2015 at 6:18 AM - Mike Kelly: in cura? no
Mar 24, 2015 at 6:21 AM - thesnomonster: wait... whats so diff that you need to do that
Mar 24, 2015 at 6:22 AM - Mike Kelly: well for one thing my bearing holder is cracked
Mar 24, 2015 at 6:23 AM - Mike Kelly: this mounts the parts fan to the bearing holder instead of needing something else to mount it from
Mar 24, 2015 at 6:23 AM - Mike Kelly: in principle i could drill it out and tap in
Mar 24, 2015 at 6:26 AM - thesnomonster: i thought your ultimate has the fans on it
Mar 24, 2015 at 6:26 AM - thesnomonster: winged if i remember
Mar 24, 2015 at 6:27 AM - Mike Kelly: well i'm running the cyclops now
Mar 24, 2015 at 6:27 AM - Mike Kelly: well chimera
Mar 24, 2015 at 6:27 AM - Mike Kelly: and i did design a fan mount for it
Mar 24, 2015 at 6:27 AM - Mike Kelly: but they're a BITCH to install
Mar 24, 2015 at 6:27 AM - Mike Kelly: and if i want to swap plates i need to remove them first
Mar 24, 2015 at 6:27 AM - thesnomonster: hmmm
Mar 24, 2015 at 6:32 AM - Mike Glass: Hey Sno, long time.
Mar 24, 2015 at 6:34 AM - thesnomonster: sup mglass
Mar 24, 2015 at 6:35 AM - Mike Glass: watchin your pretty in ping
Mar 24, 2015 at 6:35 AM - Mike Glass: pink too?
Mar 24, 2015 at 6:35 AM - thesnomonster: lol
Mar 24, 2015 at 6:35 AM - thesnomonster: it beautimuss
Mar 24, 2015 at 6:36 AM - Mike Glass: My 8 hour failed it was printing in the air...ugg
Mar 24, 2015 at 6:36 AM - Mike Glass: I need a filament monitor
Mar 24, 2015 at 6:36 AM - Mike Glass: I had to leave to replace a down server then come back to this....
Mar 24, 2015 at 6:37 AM - jbigler1986: Sorry
Mar 24, 2015 at 6:37 AM - jbigler1986: Hate that