1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Side table organizer (watch, money, rings)

Discussion in 'Projects' started by Michael DiFilippo, Apr 14, 2015.

  1. Michael DiFilippo

    Michael DiFilippo Active Member

    Joined:
    Feb 20, 2013
    Messages:
    400
    Likes Received:
    140
    Had made up a little night stand organizer for my money and a ring I wear every day and decided to come up with a new design to also show off and hold my watches. Printed it using a .6 nozzle on an E3D at .45 layer height out of bamboofill by Colorfabb. I had ZERO success with this material until I used a bigger nozzle and slowed things down but now that I seem to have the settings worked out the print quality is great. Plus the smell is awesome (like real wood being cut, love it). Printed it in three total pieces and only glued two of them, the base is just press fitted. Designed specifically to allow my watches to close and not be loose. Designed in Fusion 360 sliced via matter control and printed via Octoprint.

    IMG_6308.JPG Screen Shot 2015-04-14 at 12.36.04 PM.png Screen Shot 2015-04-14 at 12.36.13 PM.png Screen Shot 2015-04-14 at 12.37.00 PM.png
     
    Chris A and Mike Kelly like this.

Share This Page