1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Vend Machine (Candy Dispenser)

Discussion in 'Projects' started by jbigler1986, May 7, 2015.

  1. jbigler1986

    jbigler1986 Active Member

    Joined:
    Feb 13, 2015
    Messages:
    534
    Likes Received:
    128
    Here is the Vend Machine that is available on thingiverse. Total print time was around 100 hours. The body itself took 67 hours to print with full support. I probably could have printed it with no support and got it down to 30 hours but I was fine with waiting. Printed at .2 height with a .4 nozzle and 40mm/s speed. Enjoy.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    kevin wilson, Chris A, scotta and 4 others like this.
  2. Droid

    Droid Member

    Joined:
    Apr 5, 2015
    Messages:
    54
    Likes Received:
    17
    just made this too, took me 44 hours for the body at .15 infill and minimal grid support. almost identical except my knob and collar are black
     
    Chris A likes this.
  3. daniel871

    daniel871 Well-Known Member

    Joined:
    Apr 18, 2015
    Messages:
    1,322
    Likes Received:
    510
    Hello new project.
     
  4. Chris A

    Chris A Member

    Joined:
    Jan 24, 2015
    Messages:
    32
    Likes Received:
    16
    Sweet! (Literally!)
     
  5. DjAnnexAlpha

    DjAnnexAlpha Member

    Joined:
    Aug 10, 2015
    Messages:
    62
    Likes Received:
    11
    Love it! STL files are NEEEEEEEDEEEEEEEED.

    Pretty please?
     
  6. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,905
    Likes Received:
    7,338

Share This Page