1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Unresolved X and Y axis are off.

Discussion in 'Troubleshooting' started by Marc Alcarese, Aug 11, 2015.

  1. Marc Alcarese

    Marc Alcarese New Member

    Joined:
    Dec 31, 2014
    Messages:
    12
    Likes Received:
    0
    My 3D printer since the begining has had issues with the X and Y axis. I dont know how to explain it but they are extremely off. Here are some pictures. Webcam1439344346.22.jpg Webcam1439344316.22.jpg
    As you can see, the top if the circle should be touchng the "1" of the logo. Please! Any help?
     
    #1 Marc Alcarese, Aug 11, 2015
  2. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    MC is only a representation of the bed, you cannot use it to precisely gauge where the object will be placed. The bed is still the correct size just shifted toward the back of the printer a bit.
     
    #2 WheresWaldo, Aug 12, 2015
    Mike Kelly likes this.
  3. Frankn

    Frankn Member

    Joined:
    Mar 1, 2015
    Messages:
    261
    Likes Received:
    22
    Waldo is right, but if it bothers you, you can move the print By editing the print position in the image picture on the right side of your screen.
    You can also move the starting position by changing the size of the work bead in the work area description.
    Just some ideas, Frank.
     
    #3 Frankn, Aug 13, 2015

Share This Page