1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

xxl lcd controller

Discussion in 'Mods and Upgrades' started by Deadwood, Jun 9, 2014.

  1. Deadwood

    Deadwood Active Member

    Joined:
    Jul 4, 2013
    Messages:
    119
    Likes Received:
    29
    Got my xxl lcd controller form Reprap discount and it is working great and I now have my laptop back but one thing I am struggling with is how to raise the Z axis using the controller . I had to stop a print on the first layer and pushed the stop button so the nozzle is practically touching the bed, I can find the X and Y controllers and move the nozzle around the bed but can not find any Z control, is there any or do I have to hook my laptop up again and do it that way ?
     
    #1 Deadwood, Jun 9, 2014
  2. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,277
    Z axis controls only show up in the 1mm and .1mm for some reason
     
    #2 Mike Kelly, Jun 9, 2014
  3. Deadwood

    Deadwood Active Member

    Joined:
    Jul 4, 2013
    Messages:
    119
    Likes Received:
    29
    Cheers mike I will look there
     
    #3 Deadwood, Jun 9, 2014
  4. Printed Solid

    Printed Solid Volunteer Admin
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    1,605
    Likes Received:
    1,003
    That would be s***ty!
    I think it shows up on the 1mm screen as well. Not the 10mm. Same is true for the extruder.

    If you really want to, you can dig around in the firmware and change all of that around.
     
    #4 Printed Solid, Jun 9, 2014
  5. Deadwood

    Deadwood Active Member

    Joined:
    Jul 4, 2013
    Messages:
    119
    Likes Received:
    29
    cheers found it in the 1mm which is fine for my purposes
     
    #5 Deadwood, Jun 9, 2014

Share This Page