1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!
Search Again
Page 1 of 2
  1. Jacques LeDee
    Post

    Answered Bondtech QR extruder and E3d V6 hotend: How do I make these work?

    You gotta mess with the firmware. Get with matterhackers. They can walk you through it.
    Post by: Jacques LeDee, Mar 15, 2018 in forum: Troubleshooting
  2. Jacques LeDee
    Post

    Answered Bondtech QR extruder and E3d V6 hotend: How do I make these work?

    Use 2 screws. Exact, tight fit.
    Post by: Jacques LeDee, Mar 12, 2018 in forum: Troubleshooting
  3. Jacques LeDee
    Post

    Answered Bondtech QR extruder and E3d V6 hotend: How do I make these work?

    Yes. I designed a pretty descent carriage that works. I'm uploading the .stl files so you can print them. You'll need to buy hardware (bolts,...
    Post by: Jacques LeDee, Mar 11, 2018 in forum: Troubleshooting
  4. Jacques LeDee
    Post

    New mount for the E3Dv6 and Bondtech for the Robo

    what kind of programming is necessary for this to work? And any other things I should know?
    Post by: Jacques LeDee, Apr 3, 2017 in forum: Mods and Upgrades
  5. Jacques LeDee
    Post

    New mount for the E3Dv6 and Bondtech for the Robo

    what do you have to do to get the BondTech working on the R1 plus? I'm not getting any feedback from the motor or extruder.
    Post by: Jacques LeDee, Apr 3, 2017 in forum: Mods and Upgrades
  6. Jacques LeDee
    Post

    Solved Firmware upgrade for E3Dv6 and BondTech

    where is the 'slicer'?
    Post by: Jacques LeDee, Apr 3, 2017 in forum: Troubleshooting
  7. Jacques LeDee
    Post

    Solved Firmware upgrade for E3Dv6 and BondTech

    My E3DV6 is working just fine. I can't even get the extruder to move tho
    Post by: Jacques LeDee, Apr 3, 2017 in forum: Troubleshooting
  8. Jacques LeDee
    Post

    Solved Firmware upgrade for E3Dv6 and BondTech

    So I was able to find the spot where I needed to change the temp sensor to 05, but I don't know where this goes. Check attachment plz. This is...
    Post by: Jacques LeDee, Apr 3, 2017 in forum: Troubleshooting
  9. Jacques LeDee
    Post

    Solved Firmware upgrade for E3Dv6 and BondTech

    Dude y'all are awesome! Okay I will!
    Post by: Jacques LeDee, Apr 3, 2017 in forum: Troubleshooting
  10. Jacques LeDee
    Post

    Solved Firmware upgrade for E3Dv6 and BondTech

    Awesome! Finally-this is the answer I was looking for! I really appreciate the help! Thank you. I'm not by my ROBO, but as soon as I get by it,...
    Post by: Jacques LeDee, Apr 3, 2017 in forum: Troubleshooting
  11. Jacques LeDee
    Post

    Solved Firmware upgrade for E3Dv6 and BondTech

    Thanks for the help. But it's the changes that need to be made that I can't figure out where to put them. As you can see in the attached photos, I...
    Post by: Jacques LeDee, Apr 3, 2017 in forum: Troubleshooting
  12. Jacques LeDee
    Thread

    Solved Firmware upgrade for E3Dv6 and BondTech

    Can someone advise me on how to use the Arduino software to update my firmware so that I can use the E3Dv6 hot end and Bond Tech extruder? I'm...
    Thread by: Jacques LeDee, Apr 2, 2017, 14 replies, in forum: Troubleshooting
  13. Jacques LeDee
    Post

    Solved Parts fan plug

    thanks man!
    Post by: Jacques LeDee, Apr 1, 2017 in forum: Troubleshooting
  14. Jacques LeDee
    Post

    Solved Parts fan plug

    ... And the hotend fan is always on as of now
    Post by: Jacques LeDee, Apr 1, 2017 in forum: Troubleshooting
  15. Jacques LeDee
    Post

    Solved Parts fan plug

    Correct, R1 Plus. I've attached a copy of what I'm working with. I was reading on the internet while waiting for a reply and it seems as if the...
    Post by: Jacques LeDee, Apr 1, 2017 in forum: Troubleshooting
  16. Jacques LeDee
    Thread

    Solved Parts fan plug

    Can someone tell me/show me a pic of where the parts fan plug into. I did a lot of wiring last night and kinda lost track. Thankfully it's the...
    Thread by: Jacques LeDee, Apr 1, 2017, 6 replies, in forum: Troubleshooting
  17. Jacques LeDee
    Post

    New mount for the E3Dv6 and Bondtech for the Robo

    Can you help guide me through all the steps that I need to take? I'm really new to this.
    Post by: Jacques LeDee, Mar 18, 2017 in forum: Mods and Upgrades
  18. Jacques LeDee
    Post

    New mount for the E3Dv6 and Bondtech for the Robo

    Where do I start and is that the only thing I need to do?
    Post by: Jacques LeDee, Mar 17, 2017 in forum: Mods and Upgrades
  19. Jacques LeDee
    Post

    New mount for the E3Dv6 and Bondtech for the Robo

    I just built a carriage for the BondTech extruder. It's pretty sweet. Put a lot of thought into it. Anyways, I'm trying to get the BondTech and...
    Post by: Jacques LeDee, Mar 17, 2017 in forum: Mods and Upgrades
  20. Jacques LeDee
    Post

    Solved feeding filament issues

    Thanks a bunch man! I think I now have everything in order to make this happen. I'm printing a prototype of the new carriage right now. It's...
    Post by: Jacques LeDee, Mar 11, 2017 in forum: Troubleshooting
Showing results 1 to 20 of 28 Next >
Search Again
Page 1 of 2