1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!
Search Again
Page 5 of 10
  1. danzca6
    Post

    Solved First Timer

    Nathan With MatterControl you will need to set your Z offset using an M565 command in the startup scripts. Normally a good starting point is...
    Post by: danzca6, Oct 18, 2016 in forum: Troubleshooting
  2. KTMDirtFace
    Post

    Solved Simplify3D Print Bed Calibration Issues

    Thats weird your missing the Z offset. are you printing on the glass bed? My simplify3d stock startup script looks like this.. G28 ; home all...
    Post by: KTMDirtFace, Jun 8, 2016 in forum: Troubleshooting
  3. mark tomlinson
    Post

    Answered R1+ printer sometimes ejecting filament before print

    The global Z axis offset is not the same as the M565 (sadly) One is a global offset and the other is applied only to the autoleveling...
    Post by: mark tomlinson, Nov 13, 2017 in forum: Troubleshooting
  4. Geof
    Post

    Solved Simplify3D Print Bed Calibration Issues

    Hi there. It looks to me like your missing your z offset command. G28 ; home all axes G1 Z5 F5000 ; lift Z by 5mm M565 Z-1 ; set the offset for...
    Post by: Geof, Jun 8, 2016 in forum: Troubleshooting
  5. mark tomlinson
    Post

    Unanswered Added glass+PEI layer, now first layer is "too thick".

    M565 is used to adjust the Z offset. Not G29. G28 ; home all axes G1 Z5 F5000 ; lift Z by 5mm M565 Z-0.6 ; set the offset for auto-leveling...
    Post by: mark tomlinson, Jun 25, 2016 in forum: Troubleshooting
  6. mark tomlinson
    Post

    Solved Wierd print issues..

    Here is an example startup GCode block for one of mine: G28 ; home all axes G1 Z5 F5000 ; lift Z by 5mm M565 Z-0.6 ; set the offset for...
    Post by: mark tomlinson, Apr 14, 2018 in forum: Troubleshooting
  7. mark tomlinson
    Post

    Answered First layer is too for from the platform.

    If you don't use M565 you are setting a global Axis offset that is applied to the slicer calcs for all of the Z on all of the bed. With the M565...
    Post by: mark tomlinson, Jul 27, 2017 in forum: Troubleshooting
  8. Will . I . Am
    Post

    Unanswered Autoleveling using cura

    @mark tomlinson where would you put the offset number? M565 Z-.85 ;define z offset (default 1.0mm) **would you take out the parenthese and...
    Post by: Will . I . Am, Apr 16, 2017 in forum: Troubleshooting
  9. Geof
    Post

    Unresolved Z-Height issues

    Your not defining a Z offset in your start up script? Should have a "M565 Z-1.0; set the offset for auto level" between the "G28 ;" and "G29"....
    Post by: Geof, Aug 25, 2017 in forum: Troubleshooting
  10. WheresWaldo
    Post

    Answered Normal to lose height on prints?

    Yes No, use the proper Z value. There is a small amount of play between when the nozzle hits the bed and the endstop switch is actually...
    Post by: WheresWaldo, Dec 7, 2017 in forum: Troubleshooting
  11. mark tomlinson
    Post

    Community Favorite E3D v6 Information and Installation Guide

    Correct. The Z offset (when you use the M565) is only applied to the calculated flat plane the autoleveling generates. It does not affect HOME. It...
    Post by: mark tomlinson, Jan 10, 2021 in forum: Mods and Upgrades
  12. TexasToon
    Post

    How To: Cura 15.04 Setup

    2.3.0
    Post by: TexasToon, Mar 7, 2017 in forum: Software
  13. mark tomlinson
    Post

    Solved Auto leveling will not work

    Startup GCode block which is under SCRIPTS under thee Process editor G28 ; home all axes M565 Z-1.0 ; set the offset for auto-leveling mechanism...
    Post by: mark tomlinson, Feb 12, 2017 in forum: Troubleshooting
  14. Toro1966
    Post

    Unresolved First layer Wavy

    Also - where does the m565 command go and couldn't I just put that in the offset tab of the fff under gcode? It shows x, y, and z ith options to...
    Post by: Toro1966, Aug 9, 2016 in forum: Troubleshooting
  15. Oisin
    Post

    Differential IR height sensor, Attemptin' Clone....ain't sure of success...now stage 10

    That's ok Jim. My M565 value is 1mm, but I chose that at random to be honest. I thought it controlled how high the z-axis raises between it's two...
    Post by: Oisin, Aug 18, 2016 in forum: Mods and Upgrades
  16. mark tomlinson
    Post

    Solved print wont stick into bed

    Here is what I use for startup GCode: G28 ; home all axes G1 Z5 F5000 ; lift Z by 5mm M565 Z-0.6 ; set the offset for auto-leveling mechanism G29...
    Post by: mark tomlinson, Jun 11, 2017 in forum: Troubleshooting
  17. mark tomlinson
    Post

    Hello from central Florida

    The Z offset is what you want to adjust. For example (some of my startup GCODE): G28 ; home all axes G1 Z5 F5000 ; lift Z by 5mm M565 Z-1.0 ; set...
    Post by: mark tomlinson, Apr 12, 2016 in forum: United States of America
  18. mark tomlinson
    Post

    Partial Answer Z-axis offset, adjusting.

    There is a probe. It is the nozzle :) So the probe offset is ---> Zero in every direction but one... The M565 is used to set the Z offset of the...
    Post by: mark tomlinson, Aug 16, 2021 in forum: Troubleshooting
  19. mark tomlinson
    Post

    Simplify3D

    Here is mine, obviously your Z offset is custom to yours: G28 ; home all axes G1 Z5 F5000 ; lift Z by 5mm M565 Z-0.6 ; set the offset for...
    Post by: mark tomlinson, Jul 15, 2017 in forum: Software
  20. mark tomlinson
    Post

    Solved Grinding Filament - help, ready to get rid of this thing

    You have to edit the startup GCode (sorry to repeat myself) to tell it : -the Z offset -force the autoleveling to occur something like this:...
    Post by: mark tomlinson, May 12, 2016 in forum: Troubleshooting
Showing results 81 to 100 of 200 Next >
Search Again
Page 5 of 10