1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Adding Fillament Presets to XXL Lcd

Discussion in 'Troubleshooting' started by Scott Tobin, Jan 2, 2018.

  1. Scott Tobin

    Scott Tobin New Member

    Joined:
    Jan 2, 2018
    Messages:
    8
    Likes Received:
    0
    Hello, I recently added the XXL Lcd to my r1+ and noticed that it had filament presets for preheating in the control screen. I want to add more filament presets to the screen, however, I have already added filaments under the eeprom in configuration.h. If you have any ideas they would be greatly appreciated.
     
    #1 Scott Tobin, Jan 2, 2018
  2. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    Marlin only supports two preheat constants in the manner you are trying to integrate them.

    The solution to more is to add a USER SCRIPT in Configuration_adv.h, there is a #define CUSTOM_USER_MENUS and a section under it. You can basically put anything that can be enabled with G-codes or M-Codes and have a menu item for it.
     
    #2 WheresWaldo, Jan 2, 2018
    Geof, Avrution and mark tomlinson like this.

Share This Page