1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

C2 and compatible nozzles?

Discussion in 'General Questions' started by PatrickB, Mar 1, 2017.

  1. PatrickB

    PatrickB New Member

    Joined:
    Feb 15, 2017
    Messages:
    16
    Likes Received:
    2
    Hi,

    Now that I'm familiar with my C2 and all parameters... My question is: Where can I purchase different nozzle sizes with coating to use metallic filaments? I don't know what are the thread dimension on the C2!
    Filament Proto-Pasta

    Thank you for your help!

    Patrick
     
  2. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    E3D-online.com (UK)
    Printedsolid.com (US)
    filastruder.com (US)

    The hexagon accepts the same nozzle as an E3Dv6 so any compatible nozzle will work. The hardened steel are the most abrasion resistant and intended for use with metallic particle filled filaments. Stainless Steel is less resistant to wear and primarily designed to be food safe and for medical use. Brass nozzles are cheap and easily obtainable but also wear the fastest.
     
    mark tomlinson and Geof like this.
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,935
    Likes Received:
    7,341
    Agreed. The nozzles on the C2 are identical to the ones on the R1 series (and many other printers)
     
  4. PatrickB

    PatrickB New Member

    Joined:
    Feb 15, 2017
    Messages:
    16
    Likes Received:
    2
    Many thanks for your answers!
     

Share This Page