1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Answered Case Screws

Discussion in 'Troubleshooting' started by Marquis Johnson, Nov 3, 2018.

  1. Marquis Johnson

    Marquis Johnson Active Member

    Joined:
    Feb 18, 2015
    Messages:
    204
    Likes Received:
    203
    Anyone know the size of the screws that hold the case to the R1 and R1+ together. All of mine are missing and so are all my friend's Robo 3Ds
    Optimized-20181103_091607.jpg
     
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,673
    Likes Received:
    7,318
    M3 or M4 IIRC -- but I am not swearing to it :)
     
  3. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    M6 for the case screws
    &
    welcome back.
     
    mark tomlinson likes this.
  4. Marquis Johnson

    Marquis Johnson Active Member

    Joined:
    Feb 18, 2015
    Messages:
    204
    Likes Received:
    203
    OF COURSE IT'S METRIC

    I ended up going to McFaddendale Hardware and getting 10/32 nuts and bolts
    a little small, but they work.
    Optimized-20181103_121203.jpg

    (My first trip down there I got 1/4 in … which were just a hair too large)
     
  5. Marquis Johnson

    Marquis Johnson Active Member

    Joined:
    Feb 18, 2015
    Messages:
    204
    Likes Received:
    203
    And thanks, I'm glad to be printing again
     
    WheresWaldo and mark tomlinson like this.

Share This Page