Unresolved Does not work after firmware upgrade

All,

I have installed the inductive sensor and needed to upgrade the firmware as per this procedure :
http://www.instructables.com/id/Enable-Auto-Leveling-for-your-3D-Printer-Marlin-Fi/

Since the upgrade the printer does not work. Repetier or MC can connect to the printer but does nothing (I cannot move any axis and the temp of the extruder or the bed does not change).

The error message displayed by Repetier is :
Extruder switched off. MINTEMP triggered !

Can someone help ?
Thank you

The error message is as follow :

15:24:17.620 : OpenGL version:4.0.0 - Build 9.18.10.3107
15:24:17.630 : OpenGL extensions:GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_blend_color GL_EXT_abgr GL_EXT_texture3D GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_SGIS_texture_edge_clamp GL_SGIS_generate_mipmap GL_EXT_draw_range_elements GL_SGIS_texture_lod GL_EXT_rescale_normal GL_EXT_packed_pixels GL_EXT_texture_edge_clamp GL_EXT_separate_specular_color GL_ARB_multitexture GL_ARB_map_buffer_alignment GL_ARB_conservative_depth GL_EXT_texture_env_combine GL_EXT_bgra GL_EXT_blend_func_separate GL_EXT_secondary_color GL_EXT_fog_coord GL_EXT_texture_env_add GL_ARB_texture_cube_map GL_ARB_transpose_matrix GL_ARB_internalformat_query GL_ARB_texture_env_add GL_IBM_texture_mirrored_repeat GL_EXT_multi_draw_arrays GL_SUN_multi_draw_arrays GL_NV_blend_square GL_ARB_texture_compression GL_3DFX_texture_compression_FXT1 GL_EXT_texture_filter_anisotropic GL_ARB_texture_border_clamp GL_ARB_point_parameters GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_env_crossbar GL_EXT_texture_compression_s3tc GL_ARB_shadow GL_ARB_window_pos GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_ARB_vertex_program GL_EXT_texture_rectangle GL_ARB_fragment_program GL_EXT_stencil_two_side GL_ATI_separate_stencil GL_ARB_vertex_buffer_object GL_EXT_texture_lod_bias GL_ARB_occlusion_query GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_non_power_of_two GL_ARB_vertex_shader GL_NV_texgen_reflection GL_ARB_point_sprite GL_ARB_fragment_program_shadow GL_EXT_blend_equation_separate GL_ARB_depth_texture GL_ARB_texture_rectangle GL_ARB_draw_buffers GL_ARB_color_buffer_float GL_ARB_half_float_pixel GL_ARB_texture_float GL_ARB_pixel_buffer_object GL_EXT_framebuffer_object GL_ARB_draw_instanced GL_ARB_half_float_vertex GL_ARB_occlusion_query2 GL_EXT_draw_buffers2 GL_WIN_swap_hint GL_EXT_texture_sRGB GL_ARB_multisample GL_EXT_packed_float GL_EXT_texture_shared_exponent GL_ARB_texture_rg GL_ARB_texture_compression_rgtc GL_NV_conditional_render GL_EXT_texture_swizzle GL_ARB_texture_gather GL_ARB_sync GL_ARB_framebuffer_sRGB GL_EXT_packed_depth_stencil GL_ARB_depth_buffer_float GL_EXT_transform_feedback GL_ARB_transform_feedback2 GL_ARB_draw_indirect GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_ARB_framebuffer_object GL_EXT_texture_array GL_EXT_texture_integer GL_ARB_map_buffer_range GL_EXT_texture_snorm GL_ARB_blend_func_extended GL_INTEL_performance_queries GL_ARB_copy_buffer GL_ARB_sampler_objects GL_NV_primitive_restart GL_ARB_seamless_cube_map GL_ARB_uniform_buffer_object GL_ARB_depth_clamp GL_ARB_vertex_array_bgra GL_ARB_shader_bit_encoding GL_ARB_draw_buffers_blend GL_ARB_geometry_shader4 GL_EXT_geometry_shader4 GL_ARB_texture_query_lod GL_ARB_explicit_attrib_location GL_ARB_draw_elements_base_vertex GL_ARB_instanced_arrays GL_ARB_base_instance GL_ARB_fragment_coord_conventions GL_EXT_gpu_program_parameters GL_ARB_texture_buffer_object_rgb32 GL_ARB_compatibility GL_ARB_texture_rgb10_a2ui GL_ARB_texture_multisample GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_timer_query GL_ARB_tessellation_shader GL_ARB_vertex_array_object GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_texture_cube_map_array GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_shader_subroutine GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_EXT_texture_storage GL_ARB_texture_storage GL_INTEL_map_texture GL_ARB_ES2_compatibility
15:24:17.630 : OpenGL renderer:Intel(R) HD Graphics 4000
15:24:17.630 : Using fast VBOs for rendering is possible
15:24:21.470 : Printer reset detected - initalizing
15:24:21.480 : start
15:24:21.480 : echo: External Reset
15:24:21.480 : Marlin 1.0.2+
15:24:21.480 : echo: Last Updated: Aug 10 2016 14:42:42 | Author: (none, default config)
15:24:21.480 : Compiled: Aug 10 2016
15:24:21.480 : echo: Free Memory: 5341 PlannerBufferBytes: 1232
15:24:21.480 : echo:Hardcoded Default Settings Loaded
15:24:21.480 : echo:Steps per unit:
15:24:21.480 : echo: M92 X78.74 Y78.74 Z533.33 E836.00
15:24:21.480 : echo:Maximum feedrates (mm/s):
15:24:21.490 : echo: M203 X500.00 Y500.00 Z5.00 E25.00
15:24:21.490 : echo:Maximum Acceleration (mm/s2):
15:24:21.490 : echo: M201 X9000 Y9000 Z100 E10000
15:24:21.490 : echo:Acceleration: S=acceleration, T=retract acceleration
15:24:21.490 : echo: M204 S3000.00 T3000.00
15:24:21.500 : echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
15:24:21.500 : echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
15:24:21.500 : echo:Home offset (mm):
15:24:21.500 : echo: M206 X0.00 Y0.00 Z0.00
15:24:21.500 : echoID settings:
15:24:21.500 : echo: M301 P22.20 I1.08 D114.00
15:24:21.830 : Error:0
15:24:21.830 : : Extruder switched off. MINTEMP triggered !
15:24:21.870 : Errorrinter stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)
15:24:22.820 : FIRMWARE_NAME:Marlin 1.0.2+ Development From Archive SOURCE_CODE_URL:https://github.com/Ultimaker/MarlinPROTOCOL_VERSION:1.0 MACHINE_TYPE:Ultimaker EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000
15:24:22.860 : X:0.00 Y:0.00 Z:0.00 E:0.00 Count X: 0.00 Y:0.00 Z:0.00
15:24:22.860 : echo:Active Extruder: 0
15:24:22.860 : echo:Active Extruder: 0

I have attached the configuration.h file.

 

Thank you WheresWaldo.

1. I was using that firmware as I was unable to find the official Robo firmware. Where can I find it ?
2. I checked the connection, it seems ok.
3. I use metallic 3M tape. I hope it will work fine.

Thank you

 

yeah you want to at least start with the correct ROBO firmware with your machine. It has all of the thermistor, board, and steps set for you. Then change it around for you probe.

 

http://guide.robo3d.com/Wiki/ROBO_3D_Firmware_Release_Notes

 

Man you just jumped in with both feet Make sure you get the correct version of firmware. You need to know if you have the beta, the R1, or the R1+. There are changes between all of those. If you don't have couplers for your Z axis leadscrews then you have the R1+ and just use the leadscrew upgrade version to start with. If you need help choosing let us know.

 

thank you
My printer is from October 2015 order 1562. It is not the R1.
Which one I should use ?
I will post pictures as soon as it works !

 

Does it say R1 +PLUS on the bed? Do the lead screws go directly into the Stepper Motor?

2015 sounds like its probably a R1 though. If it is, you should see couplers (link) at the bottom of the lead screws.

https://d17kynu4zpq5hy.cloudfront.net/igi/robo3d/piS2AaRDLpuMEotg.huge

 

I changed the bed as part as the improvement kit upgrade and I cannot remember what was written on the previous bed.
Attached pictures of the couplers and the sensor.

 

my guess is 5/16 as I cannot screw a M8 bolt on it.

 

It works so much better when you use the right Firmware ! (5/16)
Next step, putting the metallic paper on the bed. It is not that easy if you want a perfect surface.

Thanks again for your support.

 

Awesome.... Glad to hear that the correct firmware got you going. You are the first I have seen use a probe like that. Nice

 

Next step is to fix "the disable the Z stepper motor between moves".

Can't wait to see the result of all these modifs to the final result.

 

Now you can see the benefit of the auto bed leveling. I wonder how people get good quality without this feature ??! Unless of course they spent time leveling their bed ?

I have change the power setting of the Z motor.
The Print is ongoing, I'll let you know the result.

Can someone remind me where do we connect the RAMPS fan ? I disconnected it and cannot find the pin where I should connect it again.

Thank you

 

Ugh that dog gone fan. Seriously wanting to either get a longer length of cable or mount the fan to the board and forget about it unplugging each time. It goes on the lower left 12v source and the red wire is in the right or inside pin. Let me see if i can find a pic.

Yeah ABL works pretty great when it's not using the nozzle as the probe. I also would like to see mesh leveling work in person since that takes the beds full contour and not just the plane of an assumed perfectly flat bed.

 

To be honest I did not really understand what is mesh leveling.

 

Yeah it's new and available with the release candidate of the latest version of Marlin. It's not supported, but some are trying it out for testing with the Robo.