1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Extruder Wiring Problem

Discussion in 'Troubleshooting' started by KellywithaY, May 9, 2017.

  1. KellywithaY

    KellywithaY New Member

    Joined:
    Nov 3, 2016
    Messages:
    22
    Likes Received:
    13
    I took apart my extruder and put it back together (there really should be a blueprint). Everything works! I'm doing a test print right now and that's when I noticed the wiring may be wrong.

    Check out this picture and let me know what y'all think.

    Did I mention there should be a blueprint? Because there should be one.

    [​IMG]
     
    mark tomlinson likes this.
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,629
    Likes Received:
    7,312
    LOL, yea. Sadly Robo doesn't "do that"

    Only suggestion would be to use a zip tie to hold that wire bundle a little neater.
    Not an immediate issue, but something to do. Looks good.
     
    Geof likes this.

Share This Page