1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Flexible Filament and the R1+?

Discussion in 'General Questions' started by aznhlfan, Sep 19, 2015.

  1. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    I print project boxes of all sizes and shapes with PLA and ABS. I found a web based converter that convert 2d pictures so they print 3d (example: .jpeg to .stl file). What I am wanting to try is printing a box say with ABS or PLA and then seperatly printing the logo or whatever with Ninja-flex or some other type of filament and adhere it to the box. My question is has anyone used flexible filament with their R1, and is it easy or hard to work with?
     
    #1 aznhlfan, Sep 19, 2015
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    #2 mark tomlinson, Sep 19, 2015
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    #3 mark tomlinson, Sep 19, 2015

Share This Page