1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved Hobbed Bolt

Discussion in 'General Questions' started by gayoub, Jan 18, 2016.

  1. gayoub

    gayoub Member

    Joined:
    Sep 18, 2015
    Messages:
    47
    Likes Received:
    13
    Hi guys, does anyone know where to buy a Hobbed Bolt for the ROBO3DR1 in Australia (Or online) I bought one over the internet but it was too long for the ROBO3D. The one on my ROBO3D is about 13mm from the bottom of the head to the centre of the groove. Most out there are 20+ mm. The main issue seems to be the shipping (some around $20).
    Thanks in advance.
    George
     
    #1 gayoub, Jan 18, 2016
    Last edited: Jan 18, 2016
  2. daniel871

    daniel871 Well-Known Member

    Joined:
    Apr 18, 2015
    Messages:
    1,322
    Likes Received:
    510
    Put some extra washers between the bolt head and the bearing to align the groove properly if the bolt you bought is longer.
     
    #2 daniel871, Jan 19, 2016
    gayoub likes this.
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,915
    Likes Received:
    7,338
    #3 mark tomlinson, Jan 19, 2016
    gayoub likes this.
  4. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    #4 WheresWaldo, Jan 19, 2016
    gayoub likes this.

Share This Page