Need help with feeder ASAP

No difference, did this twice. Reinstalled twice both matter control and simp3d. How do I take the head out and check the thermistor issue? Link me if there is a thread on it already, thanks

 

Dude you're going at this thing with a hatchet. The fact that both are reading 0 is probably a driver issue.

 

So the "quality" control from robo3d just means that drivers stop working when they feel like it? Great

 

Its just not heating up. Shows 0 for both bed and extruder -____________-

 

No it's your personal computer that's the problem. Their machine isn't the issue here. Stop placing blame and just take a deep breath and you'll get there.

 

no duh. 0's mean it's not communicating properly, like I already said.

 

RECEIVED: Error:0

RECEIVED: : Extruder switched off. MINTEMP triggered !

RECEIVED: Errorrinter stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)

How do I fix the m999 error. Is the thermistor DC'd like the other posts suggest?

 

What does your printer show up as in the device manager?

 

RUMBA/TAURINO atmega2560 compatible (COM3).


Just changed USB cables. Now its actually saying

Attempting connection at \\.\COM3...

Error opening selected port.

 

Install this: http://downloads.arduino.cc/arduino-1.0.6-windows.exe

and when it installs it will prompt you to install the drivers, be sure you do.

 

The only thing the printer does is home in....and makes a lot of grinding noises. Its overshooting a lot. Will install and update in a minute

 

Arduino installed...now what?

Same thing...m999 error. Please fix and restart, temp is reset its saying

 

Let me connect with team viewer, this is taking too long to troubleshoot via the forum

http://www.teamviewer.com/en/index.aspx

 

WAIT there is a small hard to reach cable DCd....have to take off the stepper. Will report back....

 

WOW IT WAS THE LITTLE CABLE LOL. Thanks for all the help Mike and Motorcycle man!