Shoutbox Archive

May 10, 2015 9:20 PM - Mike Glass: lol sweet jesus, Hey I have 10 of those fans, wonder if I should do that, can you still go full height?
May 10, 2015 9:22 PM - TechSupportGo: yep
May 10, 2015 9:22 PM - Mike Glass: very cool
May 10, 2015 9:22 PM - TechSupportGo: This tug boat I am printing is one of the best prints ever on this machine.. let me pic
May 10, 2015 9:23 PM - Mike Glass: mine turned out pretty damn nice too. I was very happy, im doing the Aria the Dragon now, bout a 6 hour print
May 10, 2015 9:29 PM - TechSupportGo: with a .8mm nozzle about 20mins in https://drive.google.com/file/d/0B8FWeUGKaHaxUzVBOEliRVp3UjA/view?usp=sharing
May 10, 2015 9:31 PM - TechSupportGo: This one was printed before the additional air, I already see a huge difference https://drive.google.com/file/d/0B8FWeUGKaHaxTldQRm85ODY2UDg/view?usp=sharing
May 10, 2015 9:33 PM - Mike Glass: yep, big difference, looks like you still have some ringing though, you should follow ziggy's guide, I elimated all mine with the ball bearings in the hc and realigning them.
May 10, 2015 9:35 PM - TechSupportGo: link?
May 10, 2015 9:36 PM - TechSupportGo: I will definitely try.. I am starting to see it more, on my earlier prints you can barley tell.
May 10, 2015 9:37 PM - Mike Glass: I hate the new search
May 10, 2015 9:38 PM - Mike Glass: http://community.robo3d.com/index.php?threads/z-axis-artifacts-known-issues-and-fixes.2576/
May 10, 2015 9:42 PM - TechSupportGo: thanks bro
May 10, 2015 9:43 PM - Mike Glass: no problemo
May 10, 2015 9:43 PM - Mike Glass: Headed to bed, see ya later.
May 10, 2015 9:47 PM - TechSupportGo: goodnight
May 10, 2015 9:47 PM - Mike Glass: http://vaughnlive.tv/coolreactions
May 10, 2015 9:50 PM - toy: nice
May 11, 2015 4:50 AM - jbigler1986: morning
May 11, 2015 4:54 AM - Stephen Capistron: morning
May 11, 2015 4:55 AM - jbigler1986: have a good weekend?
May 11, 2015 4:58 AM - Stephen Capistron: not bad, just beat from doing yard work
May 11, 2015 5:04 AM - jbigler1986: that can get exhausting
May 11, 2015 5:05 AM - Stephen Capistron: went down to my parents and did a ton of stuff saturday into sunday. then drove 2.5 hours home to rake and cut my own lawn
May 11, 2015 5:06 AM - jbigler1986: so yesterday sounds like fun
May 11, 2015 5:08 AM - Bill Monroe: morning
May 11, 2015 5:10 AM - jbigler1986: run
May 11, 2015 5:11 AM - jbigler1986: morning
May 11, 2015 5:12 AM - jbigler1986: did you sleep in Bill? It's 5am over there.
May 11, 2015 5:13 AM - jbigler1986: Where do you guys have your spools
May 11, 2015 5:13 AM - Bill Monroe: i've been working on homework since 2
May 11, 2015 5:14 AM - daniel871: What do you mean where do we have our spools?
May 11, 2015 5:14 AM - jbigler1986: not stored spools. The spool that is feeding the machine
May 11, 2015 5:15 AM - Bill Monroe: right now, mine's above the machine
May 11, 2015 5:15 AM - jbigler1986:
May 11, 2015 5:16 AM - Bill Monroe: you dont like?
May 11, 2015 5:16 AM - jbigler1986: i do but it's dangerous
May 11, 2015 5:17 AM - Bill Monroe: that's me.. doing it X-Games style
May 11, 2015 5:17 AM - jbigler1986: just trying to figure out a good filament guide
May 11, 2015 5:18 AM - Bill Monroe: im going to get some aluminum tube and fashion a guide so that I can put the spool under the machine
May 11, 2015 5:19 AM - jbigler1986:
May 11, 2015 5:20 AM - jbigler1986: that's how i have it now. it gets a lot of stress on it at times though
May 11, 2015 5:20 AM - Bill Monroe: why do you think above the machine is dangerous?
May 11, 2015 5:20 AM - Stephen Capistron: i have mine 2-3 feet above the printer
May 11, 2015 5:20 AM - jbigler1986: because if the holder breaks the spool can fall on the bed and break it
May 11, 2015 5:21 AM - Bill Monroe: maybe you should design a stronger holder?
May 11, 2015 5:21 AM - Stephen Capistron: though i'm using a 1/2" breaker bar as the dowel for the spools to spin on
May 11, 2015 5:22 AM - jbigler1986: i was thinking about printing a curved lip to attach to the slot
May 11, 2015 5:24 AM - jbigler1986: i could use just the slot but it creates to much tension on the filament and since the slot has sharp edges i figured it would end up breaking the filament
May 11, 2015 5:28 AM - Bill Monroe: i dunno.. i used it like that until I went to the dark side
May 11, 2015 5:30 AM - jbigler1986: just brainstorming ideas right now
May 11, 2015 5:38 AM - Bill Monroe:
May 11, 2015 5:47 AM - jbigler1986: lol. i like it
May 11, 2015 5:58 AM - JeffTheMess: Good morning Robonauts
May 11, 2015 6:01 AM - jbigler1986: morning
May 11, 2015 6:02 AM - JeffTheMess: how was the weekend?
May 11, 2015 6:03 AM - jbigler1986: good but busy
May 11, 2015 6:03 AM - jbigler1986: you?
May 11, 2015 6:08 AM - JeffTheMess: pretty good. raining most of the time but good
May 11, 2015 6:10 AM - jbigler1986: finally got mine printing great again over the weekend. also installed a 8 pin connector
May 11, 2015 6:17 AM - JeffTheMess: nice
May 11, 2015 6:27 AM - Bill Monroe: Hi Jeff
May 11, 2015 6:28 AM - JeffTheMess: Hows it going Bill
May 11, 2015 6:28 AM - Bill Monroe: I'm about to put a contract out on a certain college professor
May 11, 2015 6:29 AM - JeffTheMess: What a way to start the week!
May 11, 2015 6:30 AM - jbigler1986: don't saw that to loud bill
May 11, 2015 6:30 AM - Bill Monroe: I like to think of it as, making college life better for a following generation
May 11, 2015 6:30 AM - jbigler1986: say
May 11, 2015 6:30 AM - Bill Monroe: saw.. that's a good suggestion
May 11, 2015 6:31 AM - Bill Monroe: seperate parts so identification is difficult.. I like it
May 11, 2015 6:31 AM - JeffTheMess: were all friend s here but If you get caught we dont know nothing ;lol
May 11, 2015 6:32 AM - Bill Monroe: you guys know c?
May 11, 2015 6:32 AM - jbigler1986: who is Bill Monroe? never hear of him
May 11, 2015 6:32 AM - Bill Monroe: he's a dead mandolin player
May 11, 2015 6:33 AM - Bill Monroe: its just a conincidence that I happen to have a mandolin
May 11, 2015 6:38 AM - TechSupportGo: here you go http://www.thingiverse.com/thing:821080
May 11, 2015 6:39 AM - JeffTheMess: that looks well made
May 11, 2015 6:39 AM - Bill Monroe: ok, now do one for E3D V6
May 11, 2015 6:41 AM - TechSupportGo: thanks
May 11, 2015 6:42 AM - TechSupportGo: if you provide the E3D V6 I will be more than happy to design it!! My prints look so good right now.!!
May 11, 2015 6:46 AM - JeffTheMess: cad file https://grabcad.com/library/hotend-e3d-v6-for-1-75mm-fillament-1
May 11, 2015 6:46 AM - JeffTheMess: https://grabcad.com/library/e3d-v6-hotend-1
May 11, 2015 6:47 AM - Bill Monroe: I now have the Robo3D R1 - special jbigler edition
May 11, 2015 6:47 AM - Bill Monroe: I have crossed back to the light and now no longer futz with my printer, all I do is print
May 11, 2015 6:48 AM - JeffTheMess: ( i think im the only one with a stock printer)
May 11, 2015 6:52 AM - Bill Monroe: Bah humbug
May 11, 2015 6:57 AM - Bill Monroe: ok! switched to the DevC++ IDE.. now we're cooking with nuclear fission
May 11, 2015 7:06 AM - jbigler1986: i have one for the v6
May 11, 2015 7:07 AM - jbigler1986: pretty much the exact same except for the v6
May 11, 2015 7:07 AM - Greg Sheets: careful Bill, too much power will go to your head
May 11, 2015 7:09 AM - Bill Monroe: my god.. all the time waster with visual c++
May 11, 2015 7:10 AM - jbigler1986: https://www.dropbox.com/s/lrfy5uv1352dclg/v6 Fan Dual.STL?dl=0
May 11, 2015 7:13 AM - Bill Monroe: whats the two little tabs with holes for?
May 11, 2015 7:13 AM - jbigler1986: zip tie to hold wires
May 11, 2015 7:13 AM - jbigler1986: i don't use it
May 11, 2015 7:14 AM - Bill Monroe: whole thing looks funky
May 11, 2015 7:16 AM - Bill Monroe: no offense
May 11, 2015 7:16 AM - jbigler1986: works great
May 11, 2015 7:17 AM - jbigler1986: it's pretty much the same one TSG has except edited for v6
May 11, 2015 7:17 AM - jbigler1986: MK designed them

 

May 11, 2015 7:19 AM - Bill Monroe: I'll stick with what I have
May 11, 2015 7:19 AM - Mike Kelly: morning
May 11, 2015 7:19 AM - Mike Kelly: technically robo designed it, i just mirrored the fan mount
May 11, 2015 7:19 AM - TechSupportGo: its so cold in here! I think its my new design
May 11, 2015 7:20 AM - jbigler1986: yeah 1 fan is fine if you aren't bridging and stuff
May 11, 2015 7:21 AM - TechSupportGo: I used your modular as a resource and remix to the dual fan mount MK, The shrouds are all me.
May 11, 2015 7:22 AM - jbigler1986: i got worse looking prints with ducts
May 11, 2015 7:24 AM - TechSupportGo: mine was better, I even printed 25% faster.. I used benchy boat before and after and there is a huge difference
May 11, 2015 7:24 AM - Mike Kelly: wow those are crazy
May 11, 2015 7:24 AM - Mike Kelly: those 20mm put out a lot of air though
May 11, 2015 7:25 AM - jbigler1986: were you using dual fans at all before?
May 11, 2015 7:26 AM - Mike Glass: Mike they do, I have a box of them and they are used for our cisco switches, they are loud too.
May 11, 2015 7:27 AM - Mike Glass: Black Widow, thats pretty cool.
May 11, 2015 7:27 AM - Mike Kelly: yeah
May 11, 2015 7:27 AM - Mike Glass: I did get my best results from my old fans for sure.
May 11, 2015 7:27 AM - TechSupportGo: Yep.. First with single fan, then dual 10mm fans and now with 20mm fans. Best results so far
May 11, 2015 7:27 AM - Mike Kelly: how high can you go now?
May 11, 2015 7:28 AM - Mike Glass: all the way
May 11, 2015 7:28 AM - Mike Glass: ?
May 11, 2015 7:28 AM - TechSupportGo: If you notice the fans dont stick out past the stepper motor so yes
May 11, 2015 7:29 AM - Mike Glass: wonder if my pen mount would still fit.
May 11, 2015 7:29 AM - Mike Kelly: the carriage is actually biased towards the belt side
May 11, 2015 7:30 AM - TechSupportGo: It should not limit range of motion
May 11, 2015 7:30 AM - Mike Kelly: there''s more room on the motor side
May 11, 2015 7:30 AM - Mike Kelly: well you should test
May 11, 2015 7:30 AM - Mike Kelly: though i think robo's are limited to 200mm anyways
May 11, 2015 7:30 AM - Mike Glass: after last night im not touching mine for awhile.
May 11, 2015 7:30 AM - Mike Kelly: what happened
May 11, 2015 7:30 AM - TechSupportGo: lol
May 11, 2015 7:30 AM - Mike Kelly: i think the gear will hit the lid first but i'm not certain
May 11, 2015 7:31 AM - Mike Glass: Just an awesome print
May 11, 2015 7:31 AM - Mike Kelly: ah
May 11, 2015 7:31 AM - Mike Kelly: also good
May 11, 2015 7:31 AM - Mike Kelly: i tried abs on the 1.6 yesterday, first print was good but it was only 50mm in diameter
May 11, 2015 7:31 AM - TechSupportGo: I mentioned a few test in the thingy file each person should do before they start
May 11, 2015 7:31 AM - Mike Kelly: second one warped and i had layer split
May 11, 2015 7:31 AM - jbigler1986: i saw that MG. Looked good
May 11, 2015 7:32 AM - Mike Kelly: so apparently the enclosure works
May 11, 2015 7:32 AM - jbigler1986: Yeah I hate ABS
May 11, 2015 7:32 AM - Mike Glass: I was very happy with it. think it kicked braydons print in the butt
May 11, 2015 7:33 AM - Mike Glass: dont really care for this red, not as red as the hatchbox transparent red
May 11, 2015 7:34 AM - Mike Glass: TSG what red was that you used on your dual fan mount
May 11, 2015 7:35 AM - Mike Kelly: nice print mike
May 11, 2015 7:35 AM - Mike Kelly: more red than the transparent robo red i have
May 11, 2015 7:36 AM - Mike Kelly: jb do you want it? it's PLA
May 11, 2015 7:36 AM - jbigler1986: if you don't want it yeah
May 11, 2015 7:36 AM - Mike Kelly: i can't see myself using it again
May 11, 2015 7:36 AM - Mike Kelly: everyone thinks it's like a dark orange
May 11, 2015 7:36 AM - Mike Glass: Jb, do you have the hatchbox T-red?
May 11, 2015 7:37 AM - jbigler1986: not the transparent
May 11, 2015 7:37 AM - jbigler1986: regular red is pretty red
May 11, 2015 7:38 AM - Mike Glass: yeah it is, I need to get some of that, the cinnamon red I got from JUstPla is sweet.
May 11, 2015 7:38 AM - jbigler1986: i need to order some more red as well
May 11, 2015 7:39 AM - jbigler1986: along with blue, silver and white. this esun isn't as nice
May 11, 2015 7:39 AM - TechSupportGo: standard hatchbox PLA RED
May 11, 2015 7:39 AM - Mike Glass: thats a bummer
May 11, 2015 7:39 AM - Mike Glass: PLA..lol
May 11, 2015 7:40 AM - Mike Glass: that really should be ABS being that close to the hotend
May 11, 2015 7:40 AM - Mike Glass: maybe it doesnt get that hot there
May 11, 2015 7:40 AM - jbigler1986: mine is in PLA. Noissues
May 11, 2015 7:41 AM - Mike Kelly: *so far
May 11, 2015 7:41 AM - Mike Glass: ^
May 11, 2015 7:41 AM - jbigler1986: had it on for a few weeks
May 11, 2015 7:41 AM - TechSupportGo: I was panning on replacing it with abs but havent seen a need to yet, everything still looks pretty solid
May 11, 2015 7:42 AM - Mike Kelly: if you don't print much material that requires a hot bed it's fine
May 11, 2015 7:42 AM - Mike Glass: I loves me ABS, I do all my development with ABS.
May 11, 2015 7:42 AM - jbigler1986: yeah i don't go over 50 on the bed
May 11, 2015 7:42 AM - Mike Kelly: what's the biggest thing you did with ABS w/ glass & hairspray
May 11, 2015 7:42 AM - Mike Kelly: i'm gonna try kapton + hairspray next cause it works well on the rep2x
May 11, 2015 7:43 AM - Mike Kelly: but that's also enclosed sooooo
May 11, 2015 7:43 AM - jbigler1986: the tool holder
May 11, 2015 7:44 AM - Ben R: i printed a 200x200 cylinder in ABS once.
May 11, 2015 7:44 AM - Mike Kelly: uh, may i ask why
May 11, 2015 7:44 AM - Mike Glass: sewer pipe?
May 11, 2015 7:45 AM - Mike Kelly: mike that was a question for you
May 11, 2015 7:45 AM - TechSupportGo: So, if I am reading this right I just need to modify and reflash my firmware? Do I need to adjust the Pots? http://community.robo3d.com/index.php?threads/z-axis-artifacts-known-issues-and-fixes.2576/
May 11, 2015 7:45 AM - Mike Glass: vacuum duct?
May 11, 2015 7:45 AM - Mike Kelly: what about something with a flat base
May 11, 2015 7:45 AM - Ben R: it was a birdfeeder
May 11, 2015 7:45 AM - Mike Kelly: i'm stll in disagreement with ziggy on that
May 11, 2015 7:45 AM - Mike Kelly: ah
May 11, 2015 7:46 AM - Ben R: also had a 200mm cone for the roof.
May 11, 2015 7:46 AM - Ben R: took a bit
May 11, 2015 7:46 AM - Mike Glass: TSG dont worry about the firmware, I tried that didnt change anything
May 11, 2015 7:46 AM - Mike Kelly: man my stupid ssd keeps saying it's having errors
May 11, 2015 7:46 AM - Mike Kelly: i guess i need to start an RMA
May 11, 2015 7:46 AM - TechSupportGo: thanks
May 11, 2015 7:47 AM - jbigler1986: yeah ziggy thread solved nothing for me
May 11, 2015 7:47 AM - Mike Glass: loosen your stppers and see if you can align them the best you can also. and tighten all the screws on your robo, I had so many loose screws everywhere.
May 11, 2015 7:48 AM - Mike Glass: Mine is all better after I followed his guide JB
May 11, 2015 7:48 AM - Mike Glass: specially the bearings
May 11, 2015 7:49 AM - jbigler1986: oh you added bearings to the rods?
May 11, 2015 7:49 AM - Mike Glass: and super gluing the hc with aluminum wrapped threaded rods was the biggest change.
May 11, 2015 7:49 AM - Mike Glass: a bearing in each HC
May 11, 2015 7:50 AM - Mike Glass: ok a ball bearing
May 11, 2015 7:50 AM - jbigler1986: so you aren't totally stock either then
May 11, 2015 7:50 AM - Mike Glass: if you call a bb not stock sure
May 11, 2015 7:50 AM - Mike Kelly:
May 11, 2015 7:52 AM - jbigler1986: i would call that an upgrade
May 11, 2015 7:53 AM - Mike Glass: Mike Im going to say the biggest was my LCD case for the Full graphics was probably the largest ABS

 

May 11, 2015 7:53 AM - Mike Kelly: hmm ok cool
May 11, 2015 7:54 AM - Mike Kelly: and you always just use hairspray right
May 11, 2015 7:54 AM - Mike Glass: Yea on abs for sure
May 11, 2015 7:55 AM - Mike Kelly: the most annoying trend right now (or 30 years) is adding -gate to the end of any controversy
May 11, 2015 7:55 AM - jbigler1986: did you print the tool holder in ABS MG?
May 11, 2015 7:56 AM - Mike Glass: no remember I used XfnT.
May 11, 2015 7:56 AM - jbigler1986: lcd case warp at all?
May 11, 2015 7:56 AM - Mike Glass: Only thing I have to show for $49..lol
May 11, 2015 7:57 AM - Mike Kelly: if anyone can come up with a good solution for mounting my enclosure without requiring double sided tape or hardware I'll send them an enclosure for free
May 11, 2015 7:57 AM - Mike Glass: no lcd is perfecto. but that is thin, most things warp when they are thicker
May 11, 2015 7:58 AM - Mike Glass: how about velcro
May 11, 2015 7:58 AM - jbigler1986: i had fan ducts even warp
May 11, 2015 7:58 AM - Mike Kelly: basically no adhesive on the enclosure
May 11, 2015 7:58 AM - Mike Kelly: needs to be completely removable
May 11, 2015 7:59 AM - Mike Glass: all the parts I have on the robo I printed with abs, they all printed fine.
May 11, 2015 7:59 AM - Mike Kelly: whats your bed temp
May 11, 2015 7:59 AM - jbigler1986: i'm gonna say clamps MK
May 11, 2015 7:59 AM - Mike Glass: I may have an idea ( Large Wire Ties that go over the top
May 11, 2015 7:59 AM - Stephen Capistron: what about utilizing the four bolts that hold the top case on already
May 11, 2015 8:00 AM - Mike Glass: or nylon straps
May 11, 2015 8:00 AM - Mike Kelly: and then what?
May 11, 2015 8:00 AM - Mike Kelly: i was kinda thinking straps too
May 11, 2015 8:02 AM - Stephen Capistron: Just make it a bigger box that encapsulates the whole thing, and use those four points to mount it.
May 11, 2015 8:02 AM - Mike Kelly: lol
May 11, 2015 8:02 AM - Mike Kelly: well i already have the enclosure designed
May 11, 2015 8:02 AM - Mike Glass: and cut
May 11, 2015 8:02 AM - Stephen Capistron: oh well in that case
May 11, 2015 8:03 AM - Mike Glass: Mike I dont run my robo over 80 on the bed, so mostly 70-75 for ABS
May 11, 2015 8:03 AM - Stephen Capistron: struts going from the rear half to the front have to sandwich everything together?
May 11, 2015 8:04 AM - Mike Glass: giant rubber bands?
May 11, 2015 8:05 AM - Mike Kelly: if you're not familiar stephen https://www.printedsolid.com/shop/3dprinters/r3dhouse/
May 11, 2015 8:06 AM - Mike Kelly: ideally it would be printable with minimal need to purchase something
May 11, 2015 8:07 AM - Mike Glass: MEK and just adhere it to the robo?
May 11, 2015 8:07 AM - Stephen Capistron: So tabs on the bottom edge to keep the sides in the correct height
May 11, 2015 8:07 AM - Mike Kelly: needs to kepe the lid stock
May 11, 2015 8:08 AM - Stephen Capistron: maybe on the sides too to keep it in the proper space in the x direction and then a couple struts that reach around the printer to hold everything together in the Y
May 11, 2015 8:13 AM - Mike Kelly: well think about it and PM me your best idea if you're interested
May 11, 2015 8:14 AM - Mike Glass: Ohh, this is the best one I got, HOT GLUE..lol
May 11, 2015 8:14 AM - TechSupportGo: lose bolts everywhere, some even pre stripped for my pleasure
May 11, 2015 8:15 AM - Mike Kelly: #China
May 11, 2015 8:16 AM - Mike Glass: Did your snow melt Mike?
May 11, 2015 8:16 AM - Mike Kelly: oh yeah
May 11, 2015 8:17 AM - jbigler1986: probably 70 degrees or higher there now
May 11, 2015 8:17 AM - Stephen Capistron: you were complaining about not enough snow a few months ago ...
May 11, 2015 8:18 AM - Mike Kelly: yeah but it's been raining like crazy for a week
May 11, 2015 8:18 AM - Mike Kelly: we get a couple days lull then it's gonna start up again
May 11, 2015 8:18 AM - Mike Glass: its so dry here its like a desert
May 11, 2015 8:19 AM - Mike Kelly: man why did the weather channel have to buy wunderground and ruin it
May 11, 2015 8:20 AM - jbigler1986: yeah wunderground was awesome
May 11, 2015 8:20 AM - Mike Glass: haha yea almost as bad as weatherbug
May 11, 2015 8:20 AM - JeffTheMess: oh gosh weatherbug
May 11, 2015 8:21 AM - jbigler1986: weatherbug is horrible
May 11, 2015 8:21 AM - Mike Glass: its not a bug its just a virus..lol
May 11, 2015 8:39 AM - Mike Kelly: mike killed the chat with his pun
May 11, 2015 8:47 AM - Stephen Capistron: man he really did
May 11, 2015 8:48 AM - Stephen Capistron: not only does he lie about his printer being stock, but he kills chat too
May 11, 2015 8:49 AM - Mike Kelly: he's basically the worst
May 11, 2015 8:49 AM - Stephen Capistron: can't trust anyone from Montana these days
May 11, 2015 8:51 AM - Mike Kelly: it's ok, there's only like 20 of them anyways
May 11, 2015 8:57 AM - Mike Glass: ok whats a good resource for Autolevel with a servo.
May 11, 2015 8:57 AM - Mike Kelly: you mean like how to set it up?
May 11, 2015 8:58 AM - Mike Glass: mostly the firmware code
May 11, 2015 8:59 AM - Mike Kelly: well it's already in marlin
May 11, 2015 8:59 AM - Mike Kelly: you just need to define the delay and the angle
May 11, 2015 8:59 AM - Mike Kelly: well and also enabling the servo
May 11, 2015 8:59 AM - Mike Glass: #define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 70,0} // X,Y,Z Axis Extend and Retract angles
May 11, 2015 9:00 AM - Mike Glass: then the offsets
May 11, 2015 9:00 AM - Mike Kelly: yeah the offset is under the autolevel section
May 11, 2015 9:01 AM - Mike Glass: Maybe im missing the enabling the servo part
May 11, 2015 9:10 AM - Mike Kelly: //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
May 11, 2015 9:10 AM - Mike Kelly: uncomment that
May 11, 2015 9:10 AM - Mike Kelly: //#define SERVO_ENDSTOPS {-1, -1, 0} // Servo index for X, Y, Z. Disable with -1 //#define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 70,0} // X,Y,Z Axis Extend and Retract angles
May 11, 2015 9:11 AM - Mike Kelly: and both of those
May 11, 2015 9:12 AM - Mike Kelly: then you need to use the servo specified for 1 #ifdef NUM_SERVOS #define SERVO0_PIN 11 #if NUM_SERVOS > 1 #define SERVO1_PIN 6 #endif #if NUM_SERVOS > 2 #define SERVO2_PIN 5 #endif #if NUM_SERVOS > 3 #define SERVO3_PIN 4 #endif #endif
May 11, 2015 9:12 AM - Mike Glass: yeah just found the missing link
May 11, 2015 9:14 AM - Mike Glass: #define ENABLE_AUTO_BED_LEVELING I need this too right
May 11, 2015 9:14 AM - Mike Kelly: correct
May 11, 2015 9:15 AM - Mike Kelly: then define the grid points
May 11, 2015 9:18 AM - Mike Glass: for the size of a 390x290 bed would you go 3 or 4
May 11, 2015 9:18 AM - Mike Kelly: for a CNC i would go 4
May 11, 2015 9:19 AM - Mike Glass: err 490x390
May 11, 2015 9:21 AM - Mike Glass: Did you see the autolevel mount I designed for the MPCNC
May 11, 2015 9:23 AM - Mike Glass: Thanks, hopefully I can get this wired tonight and check it out.
May 11, 2015 9:24 AM - Mike Kelly: i didn't
May 11, 2015 9:24 AM - Mike Glass: its on the remix
May 11, 2015 9:24 AM - Mike Kelly: btw there is a price break at 50
May 11, 2015 9:24 AM - Mike Glass: yea saw that this morning, but only 5 dollars really all you talking about
May 11, 2015 9:25 AM - Mike Kelly: yeah those things are not cheap
May 11, 2015 9:25 AM - Mike Glass: I got another quote I should have here shortly for another place
May 11, 2015 9:25 AM - Mike Kelly: oh nice
May 11, 2015 9:26 AM - Mike Glass: they are $38 for 330mm
May 11, 2015 9:26 AM - Mike Glass: will see what shipping is
May 11, 2015 9:27 AM - Mike Kelly: gotcha, seems better
May 11, 2015 9:29 AM - Stephen Capistron: same motor?
May 11, 2015 9:32 AM - jbigler1986: if so that's a good deal
May 11, 2015 9:32 AM - jbigler1986: unless shipping is outrageous
May 11, 2015 9:33 AM - Mike Kelly: i'm sure they can just stick them in an epacket
May 11, 2015 9:40 AM - TechSupportGo: about to hit go. Another dragon head, this time with the black widow lol http://www.ustream.tv/channel/robo-3d-r1-live-techsupportgo
May 11, 2015 9:41 AM - Stephen Capistron: you should replace your leaf switch with one of these > http://www.mcmaster.com/#6551k52/=x4wmwu
May 11, 2015 9:44 AM - Stephen Capistron: or one of these

 

May 11, 2015 9:44 AM - Stephen Capistron: http://www.mcmaster.com/#6757t13/=x4wocq
May 11, 2015 9:44 AM - Bill Monroe: 99% of the guys here would have a stroke when they see the price for that switch
May 11, 2015 9:44 AM - Mike Kelly: lmao holy shit stephen
May 11, 2015 9:44 AM - Stephen Capistron: so you can go wireless
May 11, 2015 9:44 AM - Stephen Capistron: i do what i can
May 11, 2015 9:45 AM - Stephen Capistron: what do you think that Stras you have uses?
May 11, 2015 9:45 AM - Mike Glass: Ok just got two, they were on sale if you get 2 for $199
May 11, 2015 9:45 AM - Mike Glass: lol
May 11, 2015 9:45 AM - Stephen Capistron: The receiver for the wireless switch is only $350
May 11, 2015 9:49 AM - jbigler1986: i will take 4
May 11, 2015 9:57 AM - TechSupportGo: should be working now.. had the streaming set to 4K and whoa, couldnt even get it to load on my phone..
May 11, 2015 9:59 AM - jbigler1986: lights are crazy bright
May 11, 2015 10:00 AM - jbigler1986: how many are installed?
May 11, 2015 10:08 AM - jbigler1986: ouch. this esun is stringy. needs to change temps for it
May 11, 2015 10:08 AM - jbigler1986: http://www.ustream.tv/channel/jbigler1986
May 11, 2015 10:08 AM - Mike Kelly: how do you like their PLA
May 11, 2015 10:09 AM - Mike Kelly: interesting looking print
May 11, 2015 10:09 AM - jbigler1986: need to print it with .4 nozzle and see. this was .8
May 11, 2015 10:13 AM - TechSupportGo: printing at around 85% speed, have the .8mm nozzle set at .2mm .. JB I set the lights back to stock
May 11, 2015 10:15 AM - jbigler1986: you should mount the lights on the side
May 11, 2015 10:39 AM - Mike Kelly: omg this pipe route could not be slower
May 11, 2015 10:40 AM - jbigler1986: i bet it could
May 11, 2015 10:43 AM - Stephen Capistron: i bet if you used corrugated pipe it would go faster
May 11, 2015 10:56 AM - Mike Kelly: just really shouldn't have so many pipe legs
May 11, 2015 10:57 AM - JasonSolves: Grrrrr
May 11, 2015 10:57 AM - Mike Kelly: *bark bark*
May 11, 2015 10:58 AM - JasonSolves: 4 prints in a row have just stopped in the middle of the print
May 11, 2015 10:58 AM - Mike Kelly: print from SD
May 11, 2015 10:59 AM - JasonSolves: That is what I should do,
May 11, 2015 10:59 AM - JasonSolves: kill Cura
May 11, 2015 11:00 AM - jbigler1986: stop and continue or just stop completely
May 11, 2015 11:01 AM - JasonSolves: hard stop
May 11, 2015 11:01 AM - JasonSolves: but the bed and tip are still heated
May 11, 2015 11:02 AM - JasonSolves: I am trying a new file
May 11, 2015 11:02 AM - JasonSolves: but I printed 5 of the other one already....
May 11, 2015 11:02 AM - Stephen Capistron: my money is on the USB not Cura
May 11, 2015 11:02 AM - Mike Kelly: usually that's from a communication issue on your PC
May 11, 2015 11:02 AM - Mike Kelly: be sure power saving is disabled on your ports
May 11, 2015 11:03 AM - jbigler1986: just avoid USB printing
May 11, 2015 11:03 AM - Mike Kelly: also a good plan
May 11, 2015 11:03 AM - JasonSolves: this is the 500th print with the same PC and setup
May 11, 2015 11:03 AM - Mike Kelly: doesn't matter
May 11, 2015 11:03 AM - JasonSolves: only this file
May 11, 2015 11:03 AM - jbigler1986: ^
May 11, 2015 11:04 AM - Mike Kelly: i printed with repetier host for like 4 months straight, then suddenly it would stop in the middle of prints
May 11, 2015 11:04 AM - jbigler1986: any glitch in usb connection can ruin a print
May 11, 2015 11:04 AM - Mike Kelly: history is no indicator for the present when it comes to 3d printing
May 11, 2015 11:05 AM - Stephen Capistron: you sound like a disclaimer on a mutual fund prospectus
May 11, 2015 11:05 AM - jbigler1986: it's not data like transferring files. those can pause and continue. printer needs the gcode constantly sent to it
May 11, 2015 11:05 AM - Mike Kelly: i just hear that a lot "well it worked fine for months"
May 11, 2015 11:05 AM - JasonSolves: good call Mike
May 11, 2015 11:06 AM - JasonSolves: I really really want what Robo has at the offive
May 11, 2015 11:06 AM - JasonSolves: office
May 11, 2015 11:06 AM - JasonSolves: like a "Dropbox" wifi
May 11, 2015 11:06 AM - JasonSolves: and a scroll wheel LCD to select print
May 11, 2015 11:07 AM - Mike Kelly: oh are you talking the new LCD they have in the works
May 11, 2015 11:07 AM - JasonSolves: no,
May 11, 2015 11:07 AM - JasonSolves: but yes
May 11, 2015 11:07 AM - JasonSolves: I would like that one more
May 11, 2015 11:07 AM - jbigler1986: comes with mattercontrol. no thanks
May 11, 2015 11:07 AM - JasonSolves: but they are running some ugly one one that works
May 11, 2015 11:08 AM - jbigler1986: just a normal lcd like xxl or full graphics?
May 11, 2015 11:09 AM - Mike Kelly: neither
May 11, 2015 11:09 AM - Mike Kelly: it's like a full color screen
May 11, 2015 11:10 AM - Mike Kelly: not the MC touch
May 11, 2015 11:10 AM - jbigler1986: i know that's not their plan. he said ugly one so didn't know what if it was one of those
May 11, 2015 11:10 AM - JasonSolves: Mike is right for the real one
May 11, 2015 11:11 AM - JasonSolves: I was just talking about the ones they are currently running in their "3d printing factory"
May 11, 2015 11:11 AM - jbigler1986: yeah xxl or full graphics
May 11, 2015 11:11 AM - jbigler1986: you need one of those
May 11, 2015 11:12 AM - JasonSolves: I still do not understand how the SD card reader works on the R1 without any controls
May 11, 2015 11:12 AM - Mike Kelly: from the pictures i saw it was still kinda hackish
May 11, 2015 11:12 AM - Mike Kelly: needs to be cleaned up
May 11, 2015 11:12 AM - JasonSolves: I am ok with that
May 11, 2015 11:12 AM - Mike Kelly: you start the print from the software jason
May 11, 2015 11:12 AM - jbigler1986: ^
May 11, 2015 11:12 AM - JasonSolves: so I still need my computer!
May 11, 2015 11:13 AM - jbigler1986: yes
May 11, 2015 11:13 AM - JasonSolves: bummer
May 11, 2015 11:13 AM - jbigler1986: that's why you should invest in a lcd screen
May 11, 2015 11:13 AM - JasonSolves: I have one
May 11, 2015 11:13 AM - Mike Kelly: you just need to start the print with the computer, then you can unhook it
May 11, 2015 11:13 AM - JasonSolves: It was removed by robo when they added the auto level
May 11, 2015 11:13 AM - JasonSolves: maybe I need to bring it out of storage
May 11, 2015 11:13 AM - Mike Kelly: they had the LCD at ces, lemme see if i can find the picture
May 11, 2015 11:14 AM - JasonSolves: oh dang got ot go to my kids school, be back
May 11, 2015 11:14 AM - jbigler1986: reinstall the lcd then
May 11, 2015 11:18 AM - jbigler1986: i want to see a pic of this
May 11, 2015 11:18 AM - jbigler1986: I preordered a R2. ETA is 2018
May 11, 2015 11:20 AM - Mike Kelly: i think that's giving
May 11, 2015 11:20 AM - Mike Kelly: http://imgur.com/gallery/82q2VFL lol
May 11, 2015 11:21 AM - jbigler1986: wonder how many takes that took
May 11, 2015 11:21 AM - toy: he would make an excellent beer pong partner
May 11, 2015 11:21 AM - Mike Kelly: i know right jb
May 11, 2015 11:22 AM - Mike Kelly: where do you think he learned the skill toy?
May 11, 2015 11:22 AM - toy: i thought my trickj shots off the ceiling were good....
May 11, 2015 11:22 AM - jbigler1986: key ring was the best
May 11, 2015 11:24 AM - Mike Kelly: yeah
May 11, 2015 11:38 AM - jbigler1986: Aahhhhhhhhhhh
May 11, 2015 11:38 AM - jbigler1986: is it friday

 

May 11, 2015 11:39 AM - Mike Kelly: not even close
May 11, 2015 11:39 AM - Mike Kelly: i guess i should take lunch
May 11, 2015 11:40 AM - jbigler1986: just did that myself
May 11, 2015 11:57 AM - toy: do u guys get chemtrails in the sky where u live??
May 11, 2015 12:00 PM - TechSupportGo: yep
May 11, 2015 12:01 PM - toy: tech u have any theory on this?
May 11, 2015 12:03 PM - toy: http://imgur.com/yBMDhQk
May 11, 2015 12:03 PM - toy: just now
May 11, 2015 12:05 PM - TechSupportGo: I have been around the world several times and have even seen them in the most remote places.. Seems like a lot of resources and logistics if you ask me. There would have to be a lot of people involved and I know when there are people involved you cant keep a secret. If this were a global secret someone would have leaked irreparable evidence by now. I think its just a mixture of condensation, exhaust, and fuel dumps.
May 11, 2015 12:06 PM - TechSupportGo: I have a cousin that will argue that every time, he thinks its brainwash chems
May 11, 2015 12:07 PM - TechSupportGo: I have seen too much and spent too much time as a government employee to think so
May 11, 2015 12:10 PM - Mike Kelly: i flew like 50ft away from a echemtrail
May 11, 2015 12:11 PM - TechSupportGo: while in the military I jumped out of airplanes that we're leaving trails
May 11, 2015 12:12 PM - Mike Kelly: we get them a lot cause the air force flies up here to go into the mountains
May 11, 2015 12:12 PM - Mike Kelly: the academy that is
May 11, 2015 12:12 PM - Stephen Capistron: were they on fire? Only way I'd be jumping out
May 11, 2015 12:13 PM - TechSupportGo: Special Forces
May 11, 2015 12:18 PM - TechSupportGo: At 10000 feet we have to start wearing mask because the lack of oxygen around 20000 feet is when I would start seeing a trail develop.
May 11, 2015 12:22 PM - TechSupportGo: Wherever you are, its beautiful there. Even with the Chem trails
May 11, 2015 12:24 PM - Mike Kelly: i've always called them jet exhaust but yeah chem trails is a better word
May 11, 2015 12:24 PM - Mike Kelly: just water condensate from combustion
May 11, 2015 12:34 PM - jbigler1986: enjoy your last days on earth. the world is going to end.
May 11, 2015 12:48 PM - TechSupportGo: hahaha
May 11, 2015 12:50 PM - TechSupportGo: Bill inspects planes I am sure he is in on it, he could probably tell us exactly where the emissions device is located
May 11, 2015 12:52 PM - jbigler1986: probably
May 11, 2015 12:52 PM - jbigler1986: he is to busy plotting against his professor right now
May 11, 2015 12:53 PM - Stephen Capistron: Bill is in on it, no way he would divulge. Why do you think he flies around so much
May 11, 2015 1:00 PM - jbigler1986: ha
May 11, 2015 1:06 PM - jbigler1986: you turned on the lights again. ahhhhhh
May 11, 2015 1:06 PM - Mike Kelly: the tin foil hats are strong in here
May 11, 2015 1:07 PM - Stephen Capistron: i should set up a camera on my printer some time and rig up my shop lights on a random timer just to mess with you
May 11, 2015 1:08 PM - Stephen Capistron: or wrap my printer in christmas lights set to some crazy blinking pattern
May 11, 2015 1:08 PM - jbigler1986: I just can't help but to stare at them
May 11, 2015 1:08 PM - jbigler1986: am i the only one?
May 11, 2015 1:11 PM - Mike Kelly: *awkward silence*
May 11, 2015 1:11 PM - jbigler1986: lol. nobody else wants to admit it
May 11, 2015 1:11 PM - jbigler1986: my eyes are sensitive
May 11, 2015 1:12 PM - TechSupportGo: Oh yeah I couldn't see.. No one was watching anyway
May 11, 2015 1:12 PM - Mike Kelly: drunk people tend to focus more on blinking/flashing lights
May 11, 2015 1:12 PM - Mike Kelly: are you perhaps permadrunk
May 11, 2015 1:12 PM - jbigler1986: rarely drink. so nope
May 11, 2015 1:13 PM - jbigler1986: i will take sensitive eyes for good vision. trade off
May 11, 2015 1:14 PM - Mike Kelly: i have sensitive eyes and bad vision, hurray for me
May 11, 2015 1:15 PM - jbigler1986: well. go to a sermon and get healed. duh
May 11, 2015 1:16 PM - Mike Kelly: i dunno if my witch doctor couldn't solve it, no one can
May 11, 2015 1:17 PM - Mike Kelly: well i guess a regular doctor armed with lasers could
May 11, 2015 1:17 PM - jbigler1986: sarah jessica parker = witch
May 11, 2015 1:17 PM - Stephen Capistron: I thought you could treat your glaucoma at will in colorado?
May 11, 2015 1:18 PM - jbigler1986: ^
May 11, 2015 1:18 PM - Mike Kelly: lol
May 11, 2015 1:20 PM - Stephen Capistron: some timing on this conversation too
May 11, 2015 1:23 PM - jbigler1986: i see what you did there
May 11, 2015 1:23 PM - Mike Kelly: arghhh solidworkksssss
May 11, 2015 1:24 PM - Stephen Capistron: sounds like you need some AutoCad
May 11, 2015 1:24 PM - Mike Kelly: lmao
May 11, 2015 1:27 PM - Stephen Capistron: fine CREO Elements Direct
May 11, 2015 1:27 PM - Mike Kelly: needs routing
May 11, 2015 1:28 PM - Stephen Capistron: I think PTC only has cabling
May 11, 2015 1:32 PM - Mike Kelly: i just really need to upgrade to 2015
May 11, 2015 1:32 PM - Mike Kelly: i get the feeling my manager still hasn't even brought it up
May 11, 2015 1:32 PM - Mike Kelly: but if they want to pay me to stare at a loading bubble, that's fine by me
May 11, 2015 1:38 PM - Mike Glass: Blurp
May 11, 2015 1:40 PM - Mike Kelly: i think i'm taking my cyclops off tonight and going back to chimera
May 11, 2015 1:42 PM - Stephen Capistron: how deep is the thread on the heat break side of the block for the cyclops?
May 11, 2015 1:42 PM - Mike Glass: I thought you like cyclops better
May 11, 2015 1:44 PM - toy: http://imgur.com/UWs21IR this was about 20 mins ago
May 11, 2015 1:45 PM - jbigler1986: what have you gotten yourself into toy?
May 11, 2015 1:45 PM - Mike Kelly: i do prefer the cyclops but i can't get it to extrude properly
May 11, 2015 1:46 PM - toy: let me show you the current one in a sec
May 11, 2015 1:46 PM - Mike Kelly: so i'm gonna try cleaning it
May 11, 2015 1:46 PM - Mike Kelly: soak it in some acetone for a few days
May 11, 2015 1:49 PM - Mike Glass: man they are zombinizing you today toy
May 11, 2015 1:49 PM - Mike Glass: Our state is so small they dont even fly here
May 11, 2015 1:49 PM - toy: wait for it....
May 11, 2015 1:49 PM - toy: http://imgur.com/xCvGmkH
May 11, 2015 1:49 PM - toy: i have begun moving the tomato plants inside
May 11, 2015 1:50 PM - toy: what was a nice blue sunny day is a now a haze of crap
May 11, 2015 1:51 PM - toy: ill take another pic in a hour
May 11, 2015 1:52 PM - Mike Glass: lol nuclear tomatoes
May 11, 2015 1:53 PM - toy: tomato defcon is at 2 lol
May 11, 2015 1:59 PM - toy: http://www.detroitnews.com/story/ne...sen-virgil-smith-arrest-shots-fired/27113485/ wow
May 11, 2015 2:02 PM - Stephen Capistron: i messed up the location of the holes, but you'll get the idea.
May 11, 2015 2:03 PM - Stephen Capistron: Cyclops needs to be more like that. Maybe the branching should be more of a Y and less of a V, but it is on the right track
May 11, 2015 2:03 PM - Stephen Capistron: It's 5 o'clock, so i'm not going to make it "right"
May 11, 2015 2:06 PM - Mike Kelly: that looks fun to machine
May 11, 2015 2:07 PM - Stephen Capistron: right, if you aren't careful on your depths you are likely to wind up with a dead space / void in there
May 11, 2015 2:09 PM - Stephen Capistron: then extrude hone it for good measure
May 11, 2015 2:12 PM - Mike Kelly: kinda feel like the diamond is one the right track by angling the heatsinks as well
May 11, 2015 2:14 PM - Stephen Capistron: Something like the above could plug right into the E3D though
May 11, 2015 2:14 PM - Stephen Capistron: and no new carriage
May 11, 2015 2:15 PM - Mike Kelly: yeah but you'll have a pool of filament collecting at the bottom
May 11, 2015 2:16 PM - Stephen Capistron: yeah those holes need to be moved to the bottom of the drill point to prevent that, I got lazy
May 11, 2015 2:17 PM - Mike Kelly: but then you drill through the threads
May 11, 2015 2:19 PM - Stephen Capistron: go to a shallower angle and taller block to keep that from happening
May 11, 2015 2:19 PM - Mike Kelly: https://plus.google.com/u/1/103157635215674778495/posts/QsjLKMJHPLC?cfem=1 wood eustathios
May 11, 2015 2:35 PM - Mike Kelly: science!
May 11, 2015 2:41 PM - Mike Kelly: mike g: make me this, kthxbye: https://plus.google.com/u/1/115408551235684601778/posts/ZrqMoiXGnH1?cfem=1
May 11, 2015 3:05 PM - Mike Kelly: now for some 3d printing content:
May 11, 2015 3:05 PM - Mike Kelly:
May 11, 2015 3:29 PM - jbigler1986: Thinking about making an curved tube as a filament guide

 

May 11, 2015 3:30 PM - Mike Kelly: run it through some PTFE
May 11, 2015 3:33 PM - jbigler1986: Instead of making the tube?
May 11, 2015 3:33 PM - Mike Kelly: what kind of tube were you envisioning
May 11, 2015 3:35 PM - jbigler1986: The filament go into it then it would be curved to have the filament line up with the slot so it would go straight in
May 11, 2015 3:39 PM - jbigler1986:
May 11, 2015 3:39 PM - jbigler1986: Something like that only not nearly as big. Just an example
May 11, 2015 3:41 PM - jbigler1986: It would be attached to another part that would fit in the slot like top filament holders do
May 11, 2015 3:42 PM - jbigler1986: Does that make sense?
May 11, 2015 3:46 PM - toy: toy's song of the day
May 11, 2015 3:57 PM - Bill Monroe: http://www.ustream.tv/channel/bills-lab
May 11, 2015 3:59 PM - toy: ahh.. bill question for you sir... whats your take on chemtrails
May 11, 2015 4:00 PM - Mike Kelly: jb i kinda see what you're getting at but a more gradual arc would be better
May 11, 2015 4:08 PM - jbigler1986: Yes I agree. That was just an example of my idea
May 11, 2015 4:08 PM - Mike Glass: Those look like fun to make Mike
May 11, 2015 4:08 PM - jbigler1986: Bill fail. Offline
May 11, 2015 4:08 PM - Bill Monroe: chemtrails... not familiar
May 11, 2015 4:08 PM - Bill Monroe: jb fail impatient
May 11, 2015 4:09 PM - Bill Monroe: toy.. did you mean CONtrails?
May 11, 2015 4:10 PM - toy: con vs chem
May 11, 2015 4:11 PM - Bill Monroe: well, contrails are harmess and any who thinks otherwise is a pot-smoking libtard tree-huggin mosquito-kissin moron
May 11, 2015 4:11 PM - toy: im surprised you havent heard about the chemtrail conspiracy
May 11, 2015 4:12 PM - Bill Monroe: it's only a conspiracy to uneducated fear mongers
May 11, 2015 4:13 PM - toy: i know what contrails are
May 11, 2015 4:13 PM - toy: but do contrails turn normal blue sunny days into a hazy mess?
May 11, 2015 4:13 PM - Bill Monroe: hell no
May 11, 2015 4:15 PM - toy: http://imgur.com/xdHqSTs this was taken about 40 minutes after i saw the last plane
May 11, 2015 4:15 PM - toy: notice the grid pattern
May 11, 2015 4:15 PM - Bill Monroe: pretty
May 11, 2015 4:16 PM - Bill Monroe: ya, that's cuz american airlines is really owned by the CIA and they're crop dusting the population to control them
May 11, 2015 4:17 PM - toy: finally the truth
May 11, 2015 4:17 PM - toy:
May 11, 2015 4:18 PM - Bill Monroe: <hi5>
May 11, 2015 4:19 PM - toy: these cant be normal contrails...
May 11, 2015 4:19 PM - Bill Monroe: why? cuz they cross?
May 11, 2015 4:19 PM - toy: their still here 4 hours later...
May 11, 2015 4:20 PM - Bill Monroe: its cold up there
May 11, 2015 4:20 PM - toy: and turning into a hazy blanket...
May 11, 2015 4:20 PM - Bill Monroe: better not stay out under them... they'll fall on you
May 11, 2015 4:21 PM - toy: i moved my tomato plants indoors already =)
May 11, 2015 4:21 PM - Bill Monroe: you'll get infected with the biorangasms that have been super irradiated by the UV at high altitude
May 11, 2015 4:21 PM - Bill Monroe: grow lights?
May 11, 2015 4:22 PM - Bill Monroe: you're getting more harm from melting PLA in the house
May 11, 2015 4:38 PM - jbigler1986: MK, think this would do https://www.dropbox.com/s/tdr3ufeqv8cs2py/curvedtube.stl?dl=0
May 11, 2015 4:43 PM - Bill Monroe: you should make it go over a spoked pulley so you can watch it turn
May 11, 2015 4:43 PM - Bill Monroe: put some knarly curved/crooked spokes on it
May 11, 2015 4:43 PM - jbigler1986: you lost me
May 11, 2015 4:44 PM - Bill Monroe: hook it up to a bevel gear driving a pinwheel
May 11, 2015 4:44 PM - Bill Monroe: nevermind.. I'll do mine that way and have the cool filament guide
May 11, 2015 4:44 PM - jbigler1986: yeah that's way more complex that i want it. lol
May 11, 2015 4:45 PM - Bill Monroe: chicken
May 11, 2015 4:45 PM - jbigler1986: not chicken. if i had the skills i would
May 11, 2015 4:45 PM - Bill Monroe: get the skills
May 11, 2015 4:45 PM - jbigler1986: don't have the time right now
May 11, 2015 4:46 PM - Bill Monroe: you make that elbow macaroni looking thing.. you're 99% there
May 11, 2015 4:47 PM - jbigler1986: don't hate on my design
May 11, 2015 4:47 PM - Bill Monroe: hate?!?! who doesnt like macaroni???
May 11, 2015 4:47 PM - jbigler1986: more like 2 percent there
May 11, 2015 4:47 PM - Bill Monroe: bah.. dont sell youself short
May 11, 2015 4:48 PM - jbigler1986: not sure if i should go this route or just use ptfe as a guide
May 11, 2015 4:48 PM - jbigler1986: that's boring though
May 11, 2015 4:54 PM - Bill Monroe: i predict mine will have less friction that ptfe, be as robust as a hard tube, and be entertaining with visual interest
May 11, 2015 4:54 PM - Bill Monroe: you'll find it on kickstarter in the morning
May 11, 2015 4:56 PM - jbigler1986: Let me see this design you speak of
May 11, 2015 4:58 PM - Bill Monroe: heck no.. I'm going to patent it
May 11, 2015 4:58 PM - Bill Monroe:
May 11, 2015 4:59 PM - Bill Monroe: I will but I need to crank through some of these C++ programs for homework
May 11, 2015 5:01 PM - Bill Monroe: all I need to do now is comment the heck out of it
May 11, 2015 5:02 PM - jbigler1986: Uh huh. I will believe it when I see it Bill.
May 11, 2015 5:12 PM - jbigler1986: That was a fail. Filament doesn't move smoothly. To sharp of a bend. Hmmm
May 11, 2015 5:14 PM - Bill Monroe: /* *William Monroe, U05815559 *socalplanedoc@gmail.com *C/C++ Programming I : Fundamental Programming Concepts, 106644, Raymond Mitchell *11MAY2015 *C1A4E1_main.c *Win7 *Visual Studio 2013 * * asks user to input two numbers, calls functions in seperate files to determine the minimun and maximum * then prints results. */ #include <stdio.h> int main(void) { double ComputeMaximum(double var1, double var2);
May 11, 2015 5:15 PM - Bill Monroe: apparently, there's a limit and formatting doesnt translate
May 11, 2015 5:15 PM - Bill Monroe:
May 11, 2015 5:15 PM - Bill Monroe: now to comment the include files you dont include
May 11, 2015 5:23 PM - Bill Monroe: dang, this black XT is printing so nice I cant tell if it's the heated bed or the plastic
May 11, 2015 5:26 PM - Mike Kelly: i mean sure that would work jb
May 11, 2015 5:28 PM - toy: kinda a silly question... but say i want a hole that is 8mm i have to print it around 8.6ish to get it to fit
May 11, 2015 5:29 PM - toy: has anyone printed holes without having to oversize them
May 11, 2015 5:29 PM - Mike Kelly: what material
May 11, 2015 5:30 PM - toy: pla
May 11, 2015 5:30 PM - Mike Kelly: hmm pla generally contracts less so you shouldn't need much tolerance
May 11, 2015 5:30 PM - Mike Kelly: but i always use at least 3.5mm for abs and even that tends to need reaming
May 11, 2015 5:30 PM - toy: maybe its a slicer thing?
May 11, 2015 5:30 PM - Mike Kelly: could be whatcha using
May 11, 2015 5:30 PM - toy: 3.5mm oversize?
May 11, 2015 5:31 PM - Mike Kelly: oh sorry
May 11, 2015 5:31 PM - Mike Kelly: .5mm
May 11, 2015 5:31 PM - Mike Kelly: i usually always use M3
May 11, 2015 5:31 PM - Mike Kelly: so for that i use 3.5
May 11, 2015 5:31 PM - toy: oh ok..i was like wow
May 11, 2015 5:31 PM - Mike Kelly: yeah that would be huge lol
May 11, 2015 5:32 PM - toy: i wonder why this hasnt been addressed in the slicers...
May 11, 2015 5:32 PM - Mike Kelly: i don't know we can safely accuse the slicer
May 11, 2015 5:33 PM - Mike Kelly: could be a number of contributing factors
May 11, 2015 5:33 PM - toy: ui would think so
May 11, 2015 5:33 PM - Mike Kelly: what printer is this happening on
May 11, 2015 5:33 PM - toy: robo
May 11, 2015 5:33 PM - Mike Kelly: and you've been using what slicer
May 11, 2015 5:33 PM - toy: slic3r
May 11, 2015 5:34 PM - Mike Kelly: i mean just for grins you should try all the different ones, see if there's a discernable difference
May 11, 2015 5:35 PM - toy: something i will testing on... u think the slicer program could figure out the proper offset =\

 

May 11, 2015 5:35 PM - Mike Kelly: path planning is hard
May 11, 2015 5:35 PM - toy: maybe with plotter ?
May 11, 2015 5:35 PM - Mike Kelly: tolerances exist for a reason, even outside of 3d printing
May 11, 2015 5:35 PM - toy: u could get an accurate measurement on the hole
May 11, 2015 5:46 PM - TechSupportGo: yo
May 11, 2015 5:49 PM - TechSupportGo: MG did I show you this? http://www.thingiverse.com/thing:821080
May 11, 2015 5:51 PM - toy: how much does the carriage sag in the middle of the shafts with all that weight?
May 11, 2015 5:51 PM - toy: be curious to take a dial indicator to it
May 11, 2015 5:53 PM - TechSupportGo: I dont know but my prints look gooooodd
May 11, 2015 5:53 PM - Bill Monroe: I'm surprised it doesnt try to hover out of there
May 11, 2015 5:53 PM - toy: thats all that matters... have u tried anything around 50 microns?
May 11, 2015 6:01 PM - TechSupportGo: it does
May 11, 2015 6:14 PM - jbigler1986: I have yet to try anything at 50. I should
May 11, 2015 6:37 PM - jbigler1986: Printing the aria dragon since everyone else is
May 11, 2015 7:00 PM - jbigler1986: Anybody else printing anything
May 11, 2015 7:10 PM - TechSupportGo: I am still live
May 11, 2015 7:13 PM - TechSupportGo: printing this https://www.myminifactory.com/object/alduin-dragon-bust-3646
May 11, 2015 7:19 PM - Mike Kelly: good luck
May 11, 2015 7:59 PM - TechSupportGo: only one hour left
May 11, 2015 8:10 PM - Mike Glass: just started a 13 hour print
May 11, 2015 8:13 PM - TechSupportGo: nice
May 11, 2015 8:13 PM - TechSupportGo: what you priting
May 11, 2015 8:29 PM - Mike Glass: http://www.thingiverse.com/thing:246198

 

May 12, 2015 3:24 AM - jbigler1986: Morning
May 12, 2015 3:59 AM - Bill Monroe: hidey-ho!
May 12, 2015 4:24 AM - Stephen Capistron: morning
May 12, 2015 4:24 AM - Bill Monroe: SC
May 12, 2015 4:30 AM - Stephen Capistron: enjoying c++
May 12, 2015 4:30 AM - Stephen Capistron: ?
May 12, 2015 4:31 AM - Bill Monroe: actually I am.. thanks.. what I'm not enjoying is the teacher.. he's ocd/anal about a lot of stuff
May 12, 2015 4:36 AM - Stephen Capistron: i was a TA for a mechanical engineering programing class (VB) many moons ago. I can understand the OCD part a bit. It can be a pain to check code that is written indifferent styles
May 12, 2015 4:36 AM - Bill Monroe: oh, he has an automated on-line tool for that.. it's actually pretty awesome
May 12, 2015 4:37 AM - Bill Monroe: you submit your code, even large projects, it kick backs everything down to spelling errors in comments, along with why it's an error and often how to fix it
May 12, 2015 4:37 AM - Stephen Capistron: many this stuff has come a long way
May 12, 2015 4:38 AM - Bill Monroe: it was wierd at first, but now I depend on it
May 12, 2015 4:38 AM - Stephen Capistron: many man
May 12, 2015 4:38 AM - Bill Monroe: I foudn out everyone else does too
May 12, 2015 4:38 AM - Stephen Capistron: jeez
May 12, 2015 4:38 AM - Bill Monroe: there's no mercy on style, protability and adherance to ansi standards
May 12, 2015 4:38 AM - Stephen Capistron: What made you choose c++ over anything else like java or what have you
May 12, 2015 4:39 AM - Bill Monroe: my focus is on firmware for automated machinery modules
May 12, 2015 4:41 AM - Stephen Capistron: so when do you build your own auto-pilot?
May 12, 2015 4:41 AM - Bill Monroe: heh no autopilots!!
May 12, 2015 4:41 AM - Bill Monroe: i got the plane so *I* could fly it!
May 12, 2015 4:42 AM - Stephen Capistron: when is one of these going in the driveway? > http://www.terrafugia.com/aircraft/transition
May 12, 2015 4:42 AM - Bill Monroe: oh my god.. that thing is a death trap
May 12, 2015 4:43 AM - Stephen Capistron: <just turning Bill's crank up to 11>
May 12, 2015 4:43 AM - Stephen Capistron: more terrified to fly it or drive it?
May 12, 2015 4:43 AM - Bill Monroe: never say never.. but flying cars will never be part of the lifestyle
May 12, 2015 4:43 AM - Bill Monroe: it's dangerous in either regime
May 12, 2015 4:44 AM - Stephen Capistron: people as a whole are just too dumb
May 12, 2015 4:44 AM - Bill Monroe: I wouldnt want to get t-bones by a kid on a tricycle
May 12, 2015 4:44 AM - Bill Monroe: <hi5>
May 12, 2015 4:44 AM - Stephen Capistron: if they were fully automated, it could happen
May 12, 2015 4:45 AM - Bill Monroe: if they were fully automated, I'm going to move into a missle silo
May 12, 2015 4:45 AM - Stephen Capistron: not a salt cave in utah?
May 12, 2015 4:46 AM - Bill Monroe: i live in an area that has become over run with asians and pacific islanders... if you've EVER driven anywhere near them, you'd be lobbying in washington to ban flying cars
May 12, 2015 4:46 AM - Bill Monroe: naw.. I cant handle the Jacks in utah
May 12, 2015 4:49 AM - Stephen Capistron: hey i was just driving next to an older white dude who spent more time looking down than up. It is everyone
May 12, 2015 4:49 AM - Bill Monroe: Stephen... listen.. come to Mira Mesa and you'll see what I mean
May 12, 2015 4:50 AM - Bill Monroe: their biggest problem is situational awareness.. they drive down the road with tunnel vision and dont have any capacity at all to consider what's around them
May 12, 2015 4:51 AM - Bill Monroe: slamming on the brakes and making multi lane changes without an clue about who it around them.. common
May 12, 2015 4:52 AM - Bill Monroe: driving 20mph in the fast Lane? perfectly acceptable to them cuz they dont know where they're going
May 12, 2015 4:52 AM - Bill Monroe: I have an AMTRAK horn on my dakota.. it wakes them the hell up
May 12, 2015 4:53 AM - Bill Monroe: it's not that they cant drive... their culture makes them that way.. they even push grocery carts in the store the same way
May 12, 2015 4:55 AM - Bill Monroe: then you have their american born kids who pattern their driving after the fast and furious movies.. jab junk lowered to the ground and fitting with 3 lb coffee cans doe mufflers... going around corners like it's some sort of drifiting rally
May 12, 2015 4:56 AM - jbigler1986:
May 12, 2015 4:56 AM - jbigler1986: Aria dragon since everyone else was printing one
May 12, 2015 4:57 AM - Bill Monroe: jb's got a new hood ornament for his smart car!
May 12, 2015 4:58 AM - Bill Monroe: my mom used to make trophy parts I have the stuff it takes to shiny plate plastic..
May 12, 2015 4:58 AM - Bill Monroe: I should bust it out sometime and try it on printed parts
May 12, 2015 4:59 AM - jbigler1986: you should
May 12, 2015 5:00 AM - Bill Monroe: it wouldnt be as shiny due to the texture
May 12, 2015 5:01 AM - Bill Monroe: might be interestring... althought I dont even know if it will stick to PLA
May 12, 2015 5:02 AM - jbigler1986: won't hurt to try
May 12, 2015 5:02 AM - Bill Monroe: nope
May 12, 2015 5:02 AM - Bill Monroe: OK, 12 hour print starting
May 12, 2015 5:03 AM - Bill Monroe: actually, should take that long.. I have the machine jacked up to 150%
May 12, 2015 5:03 AM - Bill Monroe: I lie dragons
May 12, 2015 5:03 AM - Bill Monroe: like
May 12, 2015 5:04 AM - Bill Monroe: especially when they're accompanied by hot naked british actress in a long blonde wig
May 12, 2015 5:04 AM - jbigler1986: why wig?
May 12, 2015 5:05 AM - Bill Monroe: cuz its HAWT
May 12, 2015 5:05 AM - Bill Monroe: you've not seen game of thrones?
May 12, 2015 5:06 AM - jbigler1986: link? to the print that is
May 12, 2015 5:38 AM - jbigler1986: fine then. i don't want to see it anyways.
May 12, 2015 5:40 AM - Bill Monroe: no.. go see the first episode of game of thrones..
May 12, 2015 5:40 AM - Bill Monroe: it's not a print
May 12, 2015 5:41 AM - jbigler1986: you said 12 hour print starting. i'm confused
May 12, 2015 5:42 AM - Bill Monroe: ya, that's nothing to do with dragons
May 12, 2015 5:42 AM - jbigler1986: oh
May 12, 2015 5:43 AM - jbigler1986: are you still printing stuff for the gear pendulum thing
May 12, 2015 5:43 AM - Bill Monroe: nope
May 12, 2015 5:43 AM - Bill Monroe: now I'm making one of those ulti-high effeicieny motors
May 12, 2015 5:59 AM - Bill Monroe: E3DV6 + XT = awesomeness..... 3D printing algebra
May 12, 2015 6:02 AM - Bill Monroe: http://www.ustream.tv/channel/bills-lab
May 12, 2015 6:12 AM - jbigler1986: v6 is just awesome
May 12, 2015 6:14 AM - Bill Monroe: agreed. I'm running XT much faster than ever before.. and it's butter smooth
May 12, 2015 6:16 AM - jbigler1986: really don't have to worry about anything with it. just throw whatever at it and it works
May 12, 2015 6:17 AM - Bill Monroe: so far that's been my expeireince
May 12, 2015 6:18 AM - jbigler1986: i have had a few jams in the heat break. but just take it apart and get it out. problem solved
May 12, 2015 6:27 AM - jbigler1986: Bill I like your stream.
May 12, 2015 6:30 AM - Bill Monroe: thanks
May 12, 2015 6:31 AM - jbigler1986: that is some dark black filament. where did you get it
May 12, 2015 6:31 AM - Bill Monroe: this camera seem to be a pretty good fit.. I like that you can adjust the exposure
May 12, 2015 6:31 AM - Bill Monroe: it's colorfabb XT
May 12, 2015 6:31 AM - Bill Monroe: and you're right... it's black as Al Sharpton
May 12, 2015 6:32 AM - jbigler1986: is it like 200mm in diameter?
May 12, 2015 6:32 AM - jbigler1986: covers the whole screen
May 12, 2015 6:32 AM - Bill Monroe: what.. thr part?
May 12, 2015 6:33 AM - jbigler1986: your stream is just a black screen
May 12, 2015 6:33 AM - Bill Monroe: the part is about 105mm
May 12, 2015 6:33 AM - Bill Monroe: there.. repositioned a light
May 12, 2015 6:34 AM - jbigler1986: um. still "off air"
May 12, 2015 6:35 AM - jbigler1986: did you forget to click stream
May 12, 2015 6:38 AM - Bill Monroe: why yes... yes I did
May 12, 2015 6:39 AM - jbigler1986: lol. that's why i was kidding about the black
May 12, 2015 6:39 AM - Bill Monroe: ya, I get it
May 12, 2015 6:40 AM - Bill Monroe: but it is truly black filament
May 12, 2015 6:59 AM - jbigler1986: are you using a raft
May 12, 2015 6:59 AM - Mike Kelly: morning
May 12, 2015 7:00 AM - jbigler1986: morning
May 12, 2015 7:00 AM - Stephen Capistron: morning

 

May 12, 2015 7:00 AM - Bill Monroe: SC
May 12, 2015 7:01 AM - Bill Monroe: ya jb.. XT shrink pretty bad and tends to lift when making large-area part.. raft fixes it
May 12, 2015 7:01 AM - Bill Monroe: and just as with supports, S3D is great with rafts
May 12, 2015 7:02 AM - jbigler1986: haven't tried raft with s3d
May 12, 2015 7:02 AM - Bill Monroe: I only use when I want supergrip
May 12, 2015 7:03 AM - Stephen Capistron: Few options for you Mike
May 12, 2015 7:04 AM - Mike Kelly: how does the top one work
May 12, 2015 7:04 AM - Stephen Capistron: I go with a brim for PETG
May 12, 2015 7:04 AM - Stephen Capistron: Just a snap fit to catch the underside of the lid
May 12, 2015 7:04 AM - Mike Kelly: ah
May 12, 2015 7:05 AM - Bill Monroe: sometimes I do.. but I dont have to trim edges with a raft
May 12, 2015 7:05 AM - Stephen Capistron: i don't know how much flex you have in that acrylic though
May 12, 2015 7:06 AM - Mike Kelly: it's pretty rigid
May 12, 2015 7:06 AM - Stephen Capistron: if you want I can share the onshape file with you
May 12, 2015 7:06 AM - Mike Kelly: sure
May 12, 2015 7:07 AM - Stephen Capistron: PM me your email
May 12, 2015 7:08 AM - Mike Kelly: it's actually listed under my profile information
May 12, 2015 7:08 AM - jbigler1986: wonder if you could use a pin instead of a bolt to hold it in place for easy removal
May 12, 2015 7:10 AM - Stephen Capistron: done
May 12, 2015 7:10 AM - Mike Kelly: i'm envisioning a hook
May 12, 2015 7:10 AM - Mike Kelly: and you use a longer bolt with a nut to give you a spot to grip to
May 12, 2015 7:10 AM - jbigler1986: not a bad idea
May 12, 2015 7:11 AM - Mike Kelly: but that's a significant moment, not sure a printed part is up to the task
May 12, 2015 7:11 AM - jbigler1986: maybe alloy 910
May 12, 2015 7:14 AM - jbigler1986: think i'm gonna try the m4 bolt in that and see if I can get a nut on it without snapping. not a locknut
May 12, 2015 7:22 AM - Mike Kelly: worlds most awesome swizzle stick: http://imgur.com/gallery/BJtXeYG
May 12, 2015 7:27 AM - Mike Kelly: wtf m8: http://i.imgur.com/JPDSMIR.jpg
May 12, 2015 7:28 AM - Mike Kelly: how does that even happen
May 12, 2015 7:28 AM - Stephen Capistron: top layers for color 1 set to 0?
May 12, 2015 7:29 AM - Mike Kelly: nope
May 12, 2015 7:29 AM - jbigler1986: damn. it looks good too
May 12, 2015 7:30 AM - Stephen Capistron: your honeycomb underneath doesn't look so hot either
May 12, 2015 7:30 AM - jbigler1986: hey don't judge his infill
May 12, 2015 7:30 AM - Mike Kelly: rep2x
May 12, 2015 7:33 AM - jbigler1986: Did you see my aria dragon
May 12, 2015 7:34 AM - Mike Kelly: yeah i was looking at that, kick ass
May 12, 2015 7:34 AM - Mike Kelly: quote braydon and be like "that's cute"
May 12, 2015 7:35 AM - jbigler1986: haha. good idea
May 12, 2015 7:39 AM - Mike Glass: http://imgur.com/gallery/oJESz yummy
May 12, 2015 7:39 AM - Mike Glass: morning
May 12, 2015 7:41 AM - jbigler1986: wtf
May 12, 2015 7:41 AM - Mike Glass: I hope she didn't have a nut allergy...lmao
May 12, 2015 7:41 AM - Mike Kelly: hahaha
May 12, 2015 7:41 AM - Mike Kelly: oh man
May 12, 2015 7:41 AM - Mike Kelly: some machine is running a little less effectively
May 12, 2015 7:43 AM - jbigler1986: http://m.imgur.com/LsQzdxL,x0pQTJq,iQwNlAu,8p8VUbj,OhHPORR ignore
May 12, 2015 7:46 AM - Mike Glass: I love that nail sword, I have some of those giant nails I should do that with.
May 12, 2015 7:46 AM - jbigler1986: wonder how good it cuts
May 12, 2015 7:47 AM - Mike Kelly: never!
May 12, 2015 7:47 AM - Mike Kelly: good enough to cut an olive
May 12, 2015 7:48 AM - Mike Glass: dont nails have some lead in them?
May 12, 2015 7:49 AM - jbigler1986: it's safe i promise
May 12, 2015 7:50 AM - Stephen Capistron: drink quickly before much has a chance to leach out
May 12, 2015 7:51 AM - Stephen Capistron: McMaster sells stainless ones
May 12, 2015 7:51 AM - Mike Glass: the glass was made in china, so doesnt really matter at that point
May 12, 2015 7:51 AM - jbigler1986: gold plate it
May 12, 2015 7:52 AM - jbigler1986: about to order a g "grill"
May 12, 2015 7:52 AM - Mike Glass: g?
May 12, 2015 7:52 AM - Stephen Capistron: ^ >
May 12, 2015 7:52 AM - Stephen Capistron: ?
May 12, 2015 7:52 AM - Mike Glass: <^>
May 12, 2015 7:52 AM - jbigler1986: ole g (gangta)
May 12, 2015 7:53 AM - jbigler1986: gangsta
May 12, 2015 7:53 AM - jbigler1986: fuck
May 12, 2015 7:53 AM - Stephen Capistron: ↓
May 12, 2015 7:53 AM - Mike Glass: ▐
May 12, 2015 7:53 AM - Stephen Capistron: I'm still confused
May 12, 2015 7:53 AM - Mike Glass: ☻ what
May 12, 2015 7:53 AM - Stephen Capistron: ⁿ
May 12, 2015 7:53 AM - jbigler1986:
May 12, 2015 7:54 AM - Stephen Capistron: um, why?
May 12, 2015 7:54 AM - jbigler1986: i'm kidding. no way in hell would i do that
May 12, 2015 7:54 AM - Mike Glass: √ my porn blocker blocked your image..lol
May 12, 2015 7:54 AM - jbigler1986: just saying gold is safe. so gold plate it
May 12, 2015 7:55 AM - Stephen Capistron: Ø
May 12, 2015 7:55 AM - jbigler1986:
May 12, 2015 7:55 AM - Mike Glass: there yago ²
May 12, 2015 7:55 AM - daniel871: I think I'm going to make this and put it on my Robo, any horrible reason not to?
May 12, 2015 7:55 AM - daniel871: http://www.thingiverse.com/thing:519320/#instructions
May 12, 2015 7:56 AM - Mike Glass: its not robo approved ■
May 12, 2015 7:56 AM - jbigler1986: do you have a geared stepper?
May 12, 2015 7:57 AM - daniel871: Would it be better to use one? The thingiverse page claims it can work with either one, you just put different settings in the firmware for either one.
May 12, 2015 7:58 AM - Mike Glass: will that work for your hotend?
May 12, 2015 7:58 AM - Mike Glass: you have v6 right?
May 12, 2015 7:58 AM - daniel871: It's for the E3D v6, and yes I have that one.
May 12, 2015 7:59 AM - Mike Glass: √
May 12, 2015 7:59 AM - jbigler1986: sure. why not
May 12, 2015 7:59 AM - daniel871: Looks like all of the actual changes are above the carriage so shouldn't change the spacing on the Z-axis direction at all.
May 12, 2015 7:59 AM - jbigler1986: unless you are happy with your prints
May 12, 2015 8:01 AM - Mike Glass: Mike, how are you mounting your Bondtech?
May 12, 2015 8:02 AM - Mike Kelly: just on top of my current jig
May 12, 2015 8:03 AM - Mike Glass: not carriage mounted still bowden
May 12, 2015 8:03 AM - Mike Kelly: for now
May 12, 2015 8:03 AM - Mike Kelly: i have a design ready for direct
May 12, 2015 8:04 AM - Mike Kelly: but i envision most of the time i'll be using bowden and put on direct when i'm using flexible filaments
May 12, 2015 8:04 AM - Mike Glass: makes sense, what about dual color?
May 12, 2015 8:04 AM - Mike Kelly: i finally had a successful print last night using my one eyed chimera
May 12, 2015 8:04 AM - Mike Kelly: well one would always be bowden
May 12, 2015 8:04 AM - Mike Kelly: i don't envision a case where i'd print with dual flexibles
May 12, 2015 8:04 AM - Mike Kelly: that seems crazy

 

May 12, 2015 8:07 AM - Mike Kelly: what was the name of that 3d printer with the body shaped like a cylinder
May 12, 2015 8:08 AM - Stephen Capistron: tiko
May 12, 2015 8:08 AM - Mike Kelly: >=(
May 12, 2015 8:08 AM - Mike Kelly: it was a cartesian
May 12, 2015 8:08 AM - Stephen Capistron: indiegogo or kickstarter?
May 12, 2015 8:09 AM - Mike Kelly: one of those yeah
May 12, 2015 8:10 AM - Stephen Capistron: NEA
May 12, 2015 8:10 AM - jbigler1986: that's it
May 12, 2015 8:10 AM - Stephen Capistron: https://www.indiegogo.com/projects/nea-3d-stylish-upgradeable-3d-printing-for-all
May 12, 2015 8:11 AM - Mike Kelly: thank s
May 12, 2015 8:11 AM - Mike Kelly: i kept thinking like new
May 12, 2015 8:11 AM - jbigler1986: i like that one a lot
May 12, 2015 8:11 AM - Mike Kelly: it looks very nice
May 12, 2015 8:11 AM - jbigler1986: i just knew there was ea in it
May 12, 2015 8:12 AM - Stephen Capistron: it is much prettier than the robo
May 12, 2015 8:12 AM - Stephen Capistron: I hope they used quiet fans. It seems like a waste to have a nice looking printer that is so loud you want to hide it in a closet
May 12, 2015 8:13 AM - jbigler1986: i want to see it print something from start to finish and check the quality
May 12, 2015 8:14 AM - Mike Glass: I think they are a canadian company
May 12, 2015 8:14 AM - Mike Kelly: the description agrees
May 12, 2015 8:15 AM - Stephen Capistron: Toronto eh
May 12, 2015 8:15 AM - Mike Glass: I want one, anybody up for a group buy
May 12, 2015 8:15 AM - jbigler1986: when is expected ship date
May 12, 2015 8:16 AM - Mike Glass: oct
May 12, 2015 8:16 AM - Mike Kelly: we each fly to montana to try it
May 12, 2015 8:16 AM - Mike Glass: We dont want to overpopulate our state...
May 12, 2015 8:17 AM - Stephen Capistron: i am concerned about custom filament spools
May 12, 2015 8:17 AM - Mike Glass: they are not sustom at all
May 12, 2015 8:17 AM - Mike Glass: you can use anything
May 12, 2015 8:18 AM - Stephen Capistron: oh, i was looking at a picture that kind of gave that impression, i didn't read it anywhere
May 12, 2015 8:18 AM - jbigler1986: you just lift the top lid and the spool goes inside
May 12, 2015 8:18 AM - Mike Glass: man going through our edirectory we have a group called ISYS users..lol
May 12, 2015 8:18 AM - Stephen Capistron:
May 12, 2015 8:18 AM - Stephen Capistron: showing the filament coming out of the middle is misleading then
May 12, 2015 8:19 AM - jbigler1986: kinda
May 12, 2015 8:19 AM - Mike Glass: there is another hole on the side that the filament uses aslo
May 12, 2015 8:19 AM - Mike Glass: just like one of those harddirve spool holders that spin on a bearing.
May 12, 2015 8:20 AM - Stephen Capistron: made in NA is kind of huge
May 12, 2015 8:20 AM - Mike Kelly: yeah we'll see about that once they figure out how expensive that is
May 12, 2015 8:20 AM - Mike Glass: NA?
May 12, 2015 8:21 AM - Mike Kelly: north america
May 12, 2015 8:21 AM - Stephen Capistron: By made we really mean assembled
May 12, 2015 8:22 AM - Mike Glass: oh..lol
May 12, 2015 8:24 AM - Mike Kelly: man these bearings are too tight to fit on the drive shafts
May 12, 2015 8:24 AM - Mike Kelly: this is crap
May 12, 2015 8:24 AM - Mike Glass: The only drawback is that it is modular, which means high cost for swapping modules
May 12, 2015 8:24 AM - Mike Kelly: anyone know if it's possible to bore out a bearing
May 12, 2015 8:25 AM - Stephen Capistron: good luck keeping it from spinning
May 12, 2015 8:25 AM - Mike Glass: hot glue
May 12, 2015 8:25 AM - Stephen Capistron: you should be able to a small amount though
May 12, 2015 8:26 AM - Stephen Capistron: he needs to remove material, not add it
May 12, 2015 8:26 AM - Mike Glass: no keep from spinning
May 12, 2015 8:27 AM - Stephen Capistron: oh
May 12, 2015 8:27 AM - Stephen Capistron: Do you walk around with one of these on your hip > http://www.amazon.com/Master-Applia...1444439&sr=1-6&keywords=cordless+hot+glue+gun
May 12, 2015 8:27 AM - jbigler1986: lol
May 12, 2015 8:30 AM - Mike Glass: no mine is rechargeable
May 12, 2015 8:30 AM - Mike Kelly: let's see, you freeze the shaft and heat the bearing right?
May 12, 2015 8:30 AM - Stephen Capistron: i thought about linking to a battery powered one, but I figured butane might be a little better. Never run into a dead battery
May 12, 2015 8:31 AM - Stephen Capistron: yup. Got any LN2?
May 12, 2015 8:31 AM - Mike Kelly: lol over at the other facility
May 12, 2015 8:31 AM - Mike Glass: or ky
May 12, 2015 8:32 AM - Stephen Capistron: KY or LN2?
May 12, 2015 8:32 AM - Mike Kelly: ln2
May 12, 2015 8:32 AM - Mike Glass: hahah
May 12, 2015 8:33 AM - Mike Kelly: i keep the ky at home
May 12, 2015 8:34 AM - Mike Glass: TMI■
May 12, 2015 8:35 AM - Mike Kelly: you're right, we don't use KY
May 12, 2015 8:41 AM - Mike Kelly: seems like the cyclops is limited to 30mm/s
May 12, 2015 8:42 AM - Mike Kelly: that's a bummer
May 12, 2015 8:44 AM - Mike Glass: is that in the specs?
May 12, 2015 8:45 AM - Mike Kelly: not to my knowledge but i'm chatting with josh about it and that's what he said
May 12, 2015 8:45 AM - Mike Kelly: they print at
May 12, 2015 8:46 AM - Mike Glass: thats right up JB's speed range
May 12, 2015 8:46 AM - Mike Kelly: heh
May 12, 2015 8:47 AM - jbigler1986: i have been printing at 45 lately. sometime 55 depending on the part
May 12, 2015 8:48 AM - jbigler1986: but i don't mind print at 30mm/s. doesn't bother me
May 12, 2015 8:48 AM - Mike Kelly: i want 90
May 12, 2015 8:48 AM - Mike Glass: at least
May 12, 2015 8:48 AM - Mike Kelly: i'd prefer 120 but that seems unrealistic
May 12, 2015 8:48 AM - jbigler1986: i'm usually asleep or at work during long prints. so not a big deal
May 12, 2015 8:49 AM - Mike Kelly: i'm super curious how the bondtech will change things
May 12, 2015 8:50 AM - jbigler1986: printing this right now
May 12, 2015 8:50 AM - jbigler1986: http://www.thingiverse.com/thing:395231
May 12, 2015 8:50 AM - Stephen Capistron: anyone know the service interval on pneumatic actuators off hand?
May 12, 2015 8:51 AM - Mike Kelly: 6mo
May 12, 2015 8:51 AM - Mike Kelly: that's cool jb
May 12, 2015 8:51 AM - jbigler1986: my son saw it this morning
May 12, 2015 8:52 AM - jbigler1986: printing it in red right now just to see if it works well. then i will print it in black
May 12, 2015 8:52 AM - Mike Kelly: he's too young for minecraft though right?
May 12, 2015 8:52 AM - jbigler1986: nope
May 12, 2015 8:52 AM - Mike Kelly: oh wow
May 12, 2015 8:52 AM - jbigler1986: plays it all the time
May 12, 2015 8:52 AM - jbigler1986: i don't even know how to play it
May 12, 2015 8:52 AM - Mike Kelly: isn't he like 4?
May 12, 2015 8:52 AM - Mike Kelly: punch trees
May 12, 2015 8:52 AM - jbigler1986: my 7 year old
May 12, 2015 8:53 AM - Mike Kelly: ah
May 12, 2015 8:53 AM - Mike Glass: http://www.thingiverse.com/thing:246198 28 hours to print this.
May 12, 2015 8:53 AM - Mike Kelly: makes sense then
May 12, 2015 8:53 AM - jbigler1986: my 5 year old plays it but just breaks stuff. lol
May 12, 2015 8:54 AM - Mike Kelly: so apparently it's beneficial to not allow kids to watch tv until they're at least 3 years of age

 

May 12, 2015 8:54 AM - Mike Kelly: do you think this is actually a possible thing to do
May 12, 2015 8:55 AM - jbigler1986: that would be tough nowadays
May 12, 2015 8:55 AM - Mike Glass: JB you up to the challenge?
May 12, 2015 8:55 AM - jbigler1986: sure. why not
May 12, 2015 8:55 AM - Mike Glass: gonna start it friday night
May 12, 2015 8:56 AM - jbigler1986: i will start it after i finish the ender dragon
May 12, 2015 8:56 AM - Mike Kelly: i need to print the aria on my robo now that it's printing
May 12, 2015 8:57 AM - jbigler1986: my kids learned how to read and write/letters from scribblenauts
May 12, 2015 8:57 AM - Mike Glass: think I sliced it at 35% infill, I tried last night at 2% but the feet had holes. wonder if more top layers would of fixed it but it was about 13 hours.
May 12, 2015 8:58 AM - jbigler1986: possible. could you see the holes in the slicer
May 12, 2015 8:58 AM - Mike Glass: it was so slow on that laptop I couldnt look..lol
May 12, 2015 8:59 AM - Mike Glass: oh and use the decimated model
May 12, 2015 8:59 AM - Mike Glass: or it will take a week to slice
May 12, 2015 9:01 AM - jbigler1986: lol. yes
May 12, 2015 9:02 AM - Mike Glass: I want to do the Aria at 1.5 scale, I think it will fit.
May 12, 2015 9:09 AM - jbigler1986: it might
May 12, 2015 9:15 AM - Mike Kelly: 1.5 is 195mm tall
May 12, 2015 9:16 AM - Mike Glass: hmm maybe 1.69
May 12, 2015 9:17 AM - Mike Glass: take it to the top #motleycrue
May 12, 2015 9:17 AM - Mike Kelly: whats your max build height
May 12, 2015 9:20 AM - jbigler1986: 500mm
May 12, 2015 9:22 AM - jbigler1986: i installed longer smooth rods and longer threaded rods. had to secure them better at the base. it was my secret
May 12, 2015 9:24 AM - Mike Glass: whateva the stock robo is, 228 right?
May 12, 2015 9:25 AM - jbigler1986: i think it's 254
May 12, 2015 9:25 AM - jbigler1986: 228 is x i think
May 12, 2015 9:29 AM - Mike Kelly: 200
May 12, 2015 9:29 AM - Mike Kelly: 8" is what it's specced at
May 12, 2015 9:30 AM - Mike Glass: 8x8x10
May 12, 2015 9:30 AM - Mike Kelly: alright guys, new challenge: https://plus.google.com/u/1/+SteveGyrobotWood/posts/2HpXd7HcCdV?cfem=1
May 12, 2015 9:31 AM - Mike Kelly: technically they spec the X at 228 but it's closer to 220
May 12, 2015 9:31 AM - Mike Kelly: which could get them sued for false advertising, but hey
May 12, 2015 9:31 AM - jbigler1986: meh
May 12, 2015 9:32 AM - Mike Glass: why is that a challenge?
May 12, 2015 9:32 AM - Mike Glass: we already did that
May 12, 2015 9:32 AM - jbigler1986: flexible filament
May 12, 2015 9:32 AM - Mike Kelly: not in flexible
May 12, 2015 9:33 AM - jbigler1986: send me some and i will try it
May 12, 2015 9:33 AM - Mike Glass: me too
May 12, 2015 9:33 AM - Mike Kelly: lol
May 12, 2015 9:33 AM - Mike Glass: Im not buying that expensive crap no more
May 12, 2015 9:34 AM - Mike Kelly: haha
May 12, 2015 9:34 AM - Mike Kelly: but the experiments!
May 12, 2015 9:34 AM - Mike Glass: nylon is flexible enough for me
May 12, 2015 9:35 AM - Mike Glass: and holy crap that stuff is strong
May 12, 2015 9:37 AM - jbigler1986: printed on a witbox. never heard of that
May 12, 2015 9:38 AM - Mike Glass: wow that guy is really in to the flex
May 12, 2015 9:39 AM - jbigler1986: http://recreus.com/en/products-/66recreus-extruder.html
May 12, 2015 9:42 AM - jbigler1986: heatbreak is long
May 12, 2015 9:42 AM - Mike Glass: those are for flex material
May 12, 2015 9:43 AM - jbigler1986: sure regular filament works fine too
May 12, 2015 9:53 AM - Bill Monroe: http://www.ustream.tv/channel/bills-lab
May 12, 2015 9:55 AM - jbigler1986: what's that for? i forgot
May 12, 2015 9:55 AM - Bill Monroe: high efficient motor
May 12, 2015 9:55 AM - jbigler1986: look at that support go
May 12, 2015 9:56 AM - Bill Monroe: I am the king of support.... unless it's for .09b
May 12, 2015 10:00 AM - jbigler1986: all support should be like that
May 12, 2015 10:00 AM - jbigler1986: that is how affinia printers do it too
May 12, 2015 10:01 AM - Bill Monroe: XT rocks 255/modest retraction.. zero strings
May 12, 2015 10:09 AM - jbigler1986: this looks fun https://myminifactory.com/object/crucible-candle-holder-731
May 12, 2015 10:11 AM - Bill Monroe: make sure you wear your white makeup with black lipstick while you're doing it
May 12, 2015 10:15 AM - jbigler1986: that's a daily thing anyways
May 12, 2015 10:16 AM - Bill Monroe: ah, then you're good to go
May 12, 2015 10:16 AM - Bill Monroe:
May 12, 2015 10:17 AM - Mike Kelly: cool paint job
May 12, 2015 10:20 AM - jbigler1986: what is this zbrush
May 12, 2015 10:21 AM - Stephen Capistron: http://en.wikipedia.org/wiki/ZBrush
May 12, 2015 10:23 AM - jbigler1986: interesting
May 12, 2015 10:26 AM - jbigler1986: pretty awesome
May 12, 2015 10:29 AM - Mike Kelly: looks hard
May 12, 2015 10:30 AM - jbigler1986: might check out some beginner vids. i'm curious
May 12, 2015 10:30 AM - jbigler1986: doubt it's for anything precise
May 12, 2015 10:34 AM - Mike Glass: man I wish my zbrush tablet ran that fast.
May 12, 2015 10:40 AM - Mike Kelly: it seems like a playback
May 12, 2015 10:41 AM - Mike Glass: $82 a pair for steppers EMA17 Threaded Rod, 350mm length Tr8*8 Acme Leadscrew 5-14 days
May 12, 2015 10:42 AM - Mike Kelly: slick
May 12, 2015 10:42 AM - Mike Kelly: what torque
May 12, 2015 10:43 AM - Mike Glass: 0.4 N.m Min
May 12, 2015 10:43 AM - jbigler1986: knew you could find a better deal
May 12, 2015 10:43 AM - Mike Kelly: 56 oz-in nice
May 12, 2015 10:44 AM - Mike Kelly: 4 starts
May 12, 2015 10:47 AM - Mike Glass: could go to the 300mm also
May 12, 2015 10:47 AM - Mike Glass: about $4 cheaper
May 12, 2015 10:47 AM - Mike Glass: $8 a pair cheaper
May 12, 2015 10:48 AM - Mike Kelly: should still maintain max build volume with 300
May 12, 2015 10:48 AM - Mike Glass: yea, but why buy I rather have the 330 if I decide to take the top off
May 12, 2015 10:49 AM - Mike Kelly: 330 or 350?
May 12, 2015 10:49 AM - Mike Glass: oh..lol 350
May 12, 2015 10:50 AM - Mike Kelly: and you're sure that's the available travel distance?
May 12, 2015 10:50 AM - Mike Glass: probably not when mounted on the robo the rod is 350
May 12, 2015 10:51 AM - jbigler1986: mine are 300mm but only like 257 usable
May 12, 2015 10:51 AM - Mike Kelly: yeah i just worry about them pulling something like what happened to jb
May 12, 2015 10:52 AM - Mike Glass: but what size is the actual rod on yours jb or is 257 the actual size.
May 12, 2015 10:53 AM - Mike Kelly: they spec it out at 300 but that includes the internal length inside the stepper
May 12, 2015 10:53 AM - jbigler1986: ^
May 12, 2015 10:53 AM - Mike Glass: http://i.imgur.com/yMRT8O9.jpg
May 12, 2015 10:54 AM - Mike Glass: yea and it said they were 260mm on the site
May 12, 2015 10:55 AM - Mike Kelly: only the user reviews did
May 12, 2015 10:55 AM - Mike Kelly: cool mike
May 12, 2015 10:55 AM - Mike Glass: I read the reviews, they usaually are the deciding for me
May 12, 2015 10:56 AM - jbigler1986: if you go shorter you can just use an adapter like i did

 

May 12, 2015 10:56 AM - jbigler1986: problem solved
May 12, 2015 10:58 AM - Mike Glass: can the z steppers be used for bowden for the users that are going to be swapping?
May 12, 2015 10:59 AM - Mike Kelly: totally
May 12, 2015 10:59 AM - Mike Kelly: the wires are short butyeah
May 12, 2015 10:59 AM - Mike Glass: wonder if they make extensions
May 12, 2015 11:01 AM - Mike Kelly: possibly
May 12, 2015 11:01 AM - jbigler1986: z steppers are wired directly to the core. so would need jumper connector extension cable
May 12, 2015 11:01 AM - Mike Kelly: or cut and splice
May 12, 2015 11:02 AM - jbigler1986: or that
May 12, 2015 11:02 AM - jbigler1986: that's how i would do it
May 12, 2015 11:02 AM - Mike Glass: 1m for $6
May 12, 2015 11:02 AM - Mike Kelly: link?
May 12, 2015 11:03 AM - Mike Glass: https://www.marginallyclever.com/shop/cables/stepper-motor-extension-cables-1m I added them to the cart but get an error
May 12, 2015 11:05 AM - Mike Kelly: CAD even
May 12, 2015 11:06 AM - Mike Glass: what is that?
May 12, 2015 11:06 AM - Mike Kelly: 12" for 10 http://printrbot.com/shop/motor-extension-cable/
May 12, 2015 11:06 AM - Mike Kelly: canadian
May 12, 2015 11:07 AM - Mike Glass: ouch
May 12, 2015 11:07 AM - Mike Kelly: "Average shipping across north america is $25 CAD. "
May 12, 2015 11:08 AM - jbigler1986: i would rather splice. less of a chance of things disconnecting. That's just me bc i like to solder
May 12, 2015 11:08 AM - Mike Kelly: where do you see the error
May 12, 2015 11:08 AM - Mike Kelly: i need to buy some lead solder and a fume hood
May 12, 2015 11:08 AM - Mike Kelly: silver solder is sooo brittle
May 12, 2015 11:08 AM - Mike Kelly: and i hate aluminum wiring
May 12, 2015 11:09 AM - Mike Glass: it may be our caching server that is causing the error
May 12, 2015 11:11 AM - Mike Kelly: 8.74 to ship to me
May 12, 2015 11:12 AM - Mike Glass: for how many
May 12, 2015 11:13 AM - Stephen Capistron: i didn't realize the lead free stuff is for aluminum
May 12, 2015 11:15 AM - Mike Kelly: 2 mike
May 12, 2015 11:15 AM - Mike Kelly: i mean in general if the solder joint is going to see any stress or movement you should use lead
May 12, 2015 11:16 AM - Mike Glass: total price? or just shipping
May 12, 2015 11:17 AM - jbigler1986: flux and lead free is strong enough for anything 3d printer wise
May 12, 2015 11:21 AM - Mike Kelly: that was just shipping mike
May 12, 2015 11:31 AM - Mike Glass: I was making cables last night for the steppers, those are not too fun.
May 12, 2015 11:31 AM - toy: hows those chrimpers working out?
May 12, 2015 11:32 AM - Mike Glass: good, only messed up one so far, but yeah I like them.
May 12, 2015 11:32 AM - Mike Glass: The wire strippers help me the most, I really like those vise grip ones I got.
May 12, 2015 11:34 AM - Mike Glass: I had to run another 8 wires last night to my z carriage on the cnc, that was a tight fit in that 3/8 expandable sleeving.
May 12, 2015 11:35 AM - Mike Kelly: yeah i prefer 1/2"
May 12, 2015 11:35 AM - Mike Glass: so 2 cat fives and 4 stepper wires total.
May 12, 2015 11:35 AM - Mike Kelly: 3/8 is too small
May 12, 2015 11:35 AM - Mike Glass: it expands to 5/8 though Mike
May 12, 2015 11:35 AM - Mike Glass: it looks real nice
May 12, 2015 11:36 AM - Mike Glass: 25ft for $9
May 12, 2015 11:37 AM - toy: u have any pics of the cnc mk?
May 12, 2015 11:37 AM - Mike Kelly: i'm liking that split 1/2" i just got
May 12, 2015 11:37 AM - Mike Kelly: more expensive but so much easier to work on
May 12, 2015 11:38 AM - Mike Glass: yea faster to put on.
May 12, 2015 11:38 AM - Stephen Capistron: shielded?
May 12, 2015 11:38 AM - Mike Glass: http://www.thingiverse.com/make:134212 Toy here is my page of video and pics
May 12, 2015 11:38 AM - Mike Glass: I just added some more stuff I cut this weekend
May 12, 2015 11:39 AM - toy: 5th axis?
May 12, 2015 11:39 AM - toy: i dont see one =)
May 12, 2015 11:39 AM - Stephen Capistron: dual purpose one of the EMT tubes to be a vacuum
May 12, 2015 11:40 AM - Mike Glass: im the 5th axis..lol
May 12, 2015 11:40 AM - Stephen Capistron: i thought you are the fifth element
May 12, 2015 11:41 AM - Stephen Capistron: only when in the company of bruce willis though
May 12, 2015 11:41 AM - Mike Glass: We need to finish the sweeper/dust shoe
May 12, 2015 11:42 AM - Stephen Capistron: ha, i just heard the vacuum come one
May 12, 2015 11:42 AM - Mike Glass: The autolevel is getting hit like crazy now..geez
May 12, 2015 11:42 AM - toy: their is alot of sexy gurls in that movie
May 12, 2015 11:42 AM - Mike Glass: Milla j mmmmmm
May 12, 2015 11:43 AM - toy: lol my first true love is tori amos
May 12, 2015 11:43 AM - Mike Glass: hmm she was kinda cute in the day
May 12, 2015 11:45 AM - toy: i thinks shes pretty hot too
May 12, 2015 11:45 AM - toy: i guess i have a thing for girls that can sing
May 12, 2015 11:46 AM - Mike Glass: Listening to crucify now
May 12, 2015 11:46 AM - toy: madonna?
May 12, 2015 11:46 AM - toy: cyndi lauper was better...
May 12, 2015 11:47 AM - Mike Glass: no tori amos - little earthquakes album
May 12, 2015 11:47 AM - Stephen Capistron: you guys are dating yourselves
May 12, 2015 11:47 AM - toy: ohhh nice
May 12, 2015 11:48 AM - toy: u say that now.....but wait until i make my first billion stephen =)
May 12, 2015 11:49 AM - Mike Glass: I'm betting im the eldest one here, besides dino bill
May 12, 2015 11:50 AM - toy: im still young enough to pull 20 somethings's
May 12, 2015 11:50 AM - Mike Kelly: i guess do we know how old stephen is?
May 12, 2015 11:50 AM - toy: especially if i get on my bike
May 12, 2015 11:51 AM - Mike Glass: I have people at work think that im still 30 so its all good.
May 12, 2015 11:51 AM - jbigler1986: no we do not
May 12, 2015 11:52 AM - toy: mike glass did u watch that london grammer video...i linked tooo
May 12, 2015 11:53 AM - Stephen Capistron: 32
May 12, 2015 11:53 AM - Mike Kelly: ok so mike's the oldest one on right now
May 12, 2015 11:54 AM - toy: no me
May 12, 2015 11:54 AM - toy: maybe
May 12, 2015 11:54 AM - Mike Glass: who is that Toy?
May 12, 2015 11:54 AM - Mike Kelly: mike's 46
May 12, 2015 11:54 AM - toy: a group out of london called.... london grammer... she does a nice wicked games cover
May 12, 2015 11:55 AM - toy: ok... im not 40 yet
May 12, 2015 11:55 AM - Mike Kelly: do you mean grammar?
May 12, 2015 11:55 AM - Mike Kelly: i think the oldest member i've seen on here was 91
May 12, 2015 11:55 AM - toy: grammAr ... sry
May 12, 2015 11:56 AM - Mike Glass: Mark may have me beat though not sure
May 12, 2015 11:56 AM - toy: she is so sexy and she doesnt even know it
May 12, 2015 11:56 AM - Mike Kelly: yeah mark beats you
May 12, 2015 11:56 AM - jbigler1986: holy hell. 91
May 12, 2015 11:56 AM - Mike Kelly: she knows it
May 12, 2015 11:57 AM - toy: my future ex wife...
May 12, 2015 11:57 AM - Mike Kelly: aim high
May 12, 2015 11:57 AM - toy: would it be creepy to 3d print her a heart and send it....
May 12, 2015 11:58 AM - Mike Kelly: why not cut off your ear

 

May 12, 2015 11:58 AM - Mike Kelly: then she'll know you mean business
May 12, 2015 11:58 AM - jbigler1986: i prefer jessica simpson body type
May 12, 2015 11:58 AM - jbigler1986: wtf MK
May 12, 2015 11:59 AM - toy: i like all my appendages
May 12, 2015 11:59 AM - Mike Kelly: van gogh? c'mon this is common knowledge
May 12, 2015 11:59 AM - Mike Glass: she has a deep voice
May 12, 2015 11:59 AM - toy: i got it
May 12, 2015 11:59 AM - Mike Glass: she may be a man
May 12, 2015 11:59 AM - Mike Glass: you never know these days
May 12, 2015 11:59 AM - toy: ha
May 12, 2015 12:00 PM - toy: how dare u say such things about hannah reid
May 12, 2015 12:01 PM - Mike Kelly: hey as long as she has all the parts
May 12, 2015 12:02 PM - jbigler1986:
May 12, 2015 12:02 PM - toy: i cant argue that
May 12, 2015 12:03 PM - Stephen Capistron: https://www.google.com/url?sa=t&rct...=y4iXTiFz61s35i5yuM4LoQ&bvm=bv.93112503,d.cGU
May 12, 2015 12:03 PM - Mike Glass: as long as she is medicialy accurate..
May 12, 2015 12:04 PM - Mike Glass: come on this is the shit
May 12, 2015 12:05 PM - toy: damn i wish i had chops like that
May 12, 2015 12:05 PM - Mike Kelly: hey if not you don't have to wait a week each month... ok this convo is getting weird
May 12, 2015 12:05 PM - toy: i could probably take over the world with chops like that
May 12, 2015 12:06 PM - Mike Glass: haha, never seen the vid to this song
May 12, 2015 12:07 PM - Mike Glass: Piano player looks like one of my friends..scary
May 12, 2015 12:14 PM - toy: in other news... http://cnsnews.com/news/article/bri...down-state-based-obamacare-exchange-over-lack
May 12, 2015 12:15 PM - jbigler1986: ugh. obamacare
May 12, 2015 12:26 PM - toy: socialism at its best
May 12, 2015 12:39 PM - toy: http://www.marketwatch.com/investing/stock/wlcdf my 10,000 shares are looking good... part of risky mining portfolio
May 12, 2015 12:40 PM - Mike Kelly: let's try and keep politics out of here
May 12, 2015 12:41 PM - toy: isnt 3d printing goal to solve political / economic problems?
May 12, 2015 12:42 PM - Mike Kelly: 3d printing is bipartisan
May 12, 2015 12:42 PM - toy: nice
May 12, 2015 12:42 PM - Mike Kelly: especially with next year being an election year
May 12, 2015 12:42 PM - Stephen Capistron: well only if you are running a chimera or cyclops
May 12, 2015 12:42 PM - Mike Kelly: we really don't need to discuss it on here, bad enough everywhere else
May 12, 2015 12:43 PM - Mike Kelly: my cyclops bleeds red and blue
May 12, 2015 12:43 PM - Stephen Capistron: and then stops extruding
May 12, 2015 12:43 PM - Mike Glass: I effin hate politics, even more then XfnT..
May 12, 2015 12:43 PM - Stephen Capistron: more than gorilla glue?
May 12, 2015 12:43 PM - Mike Kelly: once it's in place it doesn't do any work
May 12, 2015 12:43 PM - Mike Glass: well maybe not that much
May 12, 2015 12:44 PM - toy: does your extruder have a government job?
May 12, 2015 12:45 PM - Mike Kelly: apparently
May 12, 2015 12:45 PM - Mike Kelly: it's backed by the koch brothers so it'll be in senate next year
May 12, 2015 12:45 PM - Mike Kelly: i'm sorry i said no politics then i make a jab
May 12, 2015 12:47 PM - toy: and still wont do anything =\
May 12, 2015 1:06 PM - jbigler1986: almost that time
May 12, 2015 1:06 PM - jbigler1986: what happened to Bam
May 12, 2015 1:07 PM - Mike Glass: he messaged me, hes around
May 12, 2015 1:08 PM - jbigler1986: looks like some of the parts came loose. some are stuck to the heat block. booooo
May 12, 2015 1:12 PM - Mike Glass: boohoo
May 12, 2015 1:13 PM - Mike Glass: that sucky's
May 12, 2015 1:14 PM - jbigler1986: http://www.ustream.tv/channel/jbigler1986
May 12, 2015 1:14 PM - jbigler1986: i need to adjust my lighting. hard to see the actual parts
May 12, 2015 1:38 PM - Bill Monroe: that is RED
May 12, 2015 1:39 PM - Bill Monroe: Hey! MG! http://www.ustream.tv/channel/bills-lab
May 12, 2015 1:43 PM - Mike Kelly: jb i think your stream is trying to give me a seizure
May 12, 2015 1:45 PM - Mike Glass: what is it bill
May 12, 2015 1:48 PM - jbigler1986: ha. the glob came off of the heat block. on the back part. lol
May 12, 2015 1:52 PM - jbigler1986: Bill is printing a part for his contraption for his professor
May 12, 2015 2:01 PM - Mike Glass: looks like a part that a .8 would work great on.
May 12, 2015 2:02 PM - Mike Kelly: looks like jb's is having a lot of stringing
May 12, 2015 2:03 PM - Mike Glass: Hes fishing
May 12, 2015 2:04 PM - Mike Glass: must be home now lights came on
May 12, 2015 2:08 PM - Mike Kelly: whatever it's doing now looks strange
May 12, 2015 2:10 PM - Mike Glass: omg somebody asked me a question on amazon, on jst connectors, " are these easy to use" Really
May 12, 2015 2:11 PM - Mike Kelly: heh
May 12, 2015 2:21 PM - jbigler1986: I need to drop the temp. 25 nozzle oozes more. Or maybe it's the clean hotend/heat break
May 12, 2015 2:28 PM - Mike Glass: yea .2 nozzle I run 15 to 20 degrees cooler
May 12, 2015 2:29 PM - jbigler1986: Gonna drop it to like 190 or so from 200
May 12, 2015 2:31 PM - jbigler1986: Gonna change filament and print this in black in after I check and make sure the connectors work
May 12, 2015 2:34 PM - Mike Glass: are they snap fit?
May 12, 2015 2:35 PM - Mike Kelly: http://www.ustream.tv/channel/ride-along-my-robo-3d i wish ustream's quality was better
May 12, 2015 2:35 PM - Mike Kelly: i should setup vaughn
May 12, 2015 2:39 PM - Mike Glass: baby poop?
May 12, 2015 2:39 PM - Mike Glass: or is that gold
May 12, 2015 2:40 PM - Mike Kelly: it's yellow, does look gross from that perspective
May 12, 2015 2:40 PM - Mike Glass: Mike you gonna do Aria?
May 12, 2015 2:40 PM - Mike Kelly: looks nice when it's done though, really bright yellow
May 12, 2015 2:40 PM - Mike Kelly: first one at a time print
May 12, 2015 2:40 PM - Mike Kelly: yeah i'm gonna try that tonight on both my printers
May 12, 2015 2:41 PM - Mike Kelly: i needed a couple more parts for the transmission so i'm printing those
May 12, 2015 2:41 PM - Mike Glass: sweet
May 12, 2015 2:43 PM - Mike Kelly: http://i.imgur.com/Jg9lJVY.jpg this is cool
May 12, 2015 2:52 PM - Mike Glass: nice, I see the yellow now, much better.
May 12, 2015 3:18 PM - Mike Kelly: lol mike i like your DIY screw terminal
May 12, 2015 3:20 PM - Mike Kelly: oh wait that was allted
May 12, 2015 3:26 PM - Mike Glass: hmm didnt see that
May 12, 2015 3:26 PM - Mike Glass: lol nice
May 12, 2015 3:29 PM - Mike Kelly: each axis has 2 steppers?
May 12, 2015 3:29 PM - Mike Kelly: except Z i guess
May 12, 2015 3:31 PM - Mike Glass: yup
May 12, 2015 3:31 PM - Mike Glass: 5 total
May 12, 2015 3:31 PM - Mike Kelly: makes sense
May 12, 2015 3:31 PM - Mike Glass: cause I can count..lol, ok im headed home
May 12, 2015 3:57 PM - jbigler1986: haha
May 12, 2015 3:58 PM - jbigler1986: I posted a comment on your stream page
May 12, 2015 4:00 PM - Mike Kelly: lmao
May 12, 2015 4:01 PM - jbigler1986: there
May 12, 2015 4:10 PM - jbigler1986: about to see how she does at 60mm/s
May 12, 2015 4:26 PM - jbigler1986: stream is up
May 12, 2015 4:33 PM - Mike Glass: 60 my god jim your gonna blow us up.

 

May 12, 2015 4:37 PM - jbigler1986: Lol
May 12, 2015 4:38 PM - jbigler1986: Not sure if I have ever printed at 60 on the robo
May 12, 2015 4:39 PM - Mike Glass: believe that is the default so sure you have
May 12, 2015 4:40 PM - Mike Glass: just started Aria at 1.5 scale
May 12, 2015 4:40 PM - jbigler1986: Maybe like the first couple days. No success with it though
May 12, 2015 4:41 PM - Mike Glass: 13 effin hours by far my longest print
May 12, 2015 4:43 PM - jbigler1986: That's seems to be my average. Lol
May 12, 2015 4:44 PM - Bill Monroe: back
May 12, 2015 4:44 PM - Mike Glass: the 30 hour one be be interesting
May 12, 2015 4:45 PM - Mike Glass: Hey Bill
May 12, 2015 4:45 PM - Bill Monroe: MG!
May 12, 2015 4:45 PM - Bill Monroe: <-- the anti-MG
May 12, 2015 4:45 PM - Bill Monroe: cuz, I like XT
May 12, 2015 4:46 PM - Mike Glass: haha dont buy the white
May 12, 2015 4:46 PM - Bill Monroe: I have the white... it works fine
May 12, 2015 4:46 PM - Mike Glass: the old or new formula
May 12, 2015 4:46 PM - Bill Monroe: here, I did a part yesterday while.. lemme snap some pix
May 12, 2015 4:47 PM - Bill Monroe: i dunno.. got it in January
May 12, 2015 4:47 PM - Mike Glass: probably the old then
May 12, 2015 4:53 PM - Bill Monroe: White is hard to photograph.
May 12, 2015 4:55 PM - Bill Monroe: https://www.dropbox.com/s/yo84mvlh85v92j3/IMG_2691.JPG?dl=0
May 12, 2015 4:57 PM - jbigler1986: MK have you tried the bondic yet
May 12, 2015 5:10 PM - jbigler1986: It was looking good so I bumped it up 10 percent
May 12, 2015 5:18 PM - jbigler1986: Bill what are you doing
May 12, 2015 5:20 PM - Bill Monroe: i just came back in the house.. a bunch of cars are in the area along with production trailers...had to see what was making the dog bark
May 12, 2015 5:21 PM - Bill Monroe: why? you writing a book?
May 12, 2015 5:22 PM - Bill Monroe:
May 12, 2015 5:23 PM - Bill Monroe:
May 12, 2015 5:23 PM - jbigler1986: Yep. I am writing a book. Got a problem with it
May 12, 2015 5:23 PM - Bill Monroe: King Kong Productions? sounds like porno to me
May 12, 2015 5:23 PM - Bill Monroe: ok well leave my chapter out
May 12, 2015 5:24 PM - jbigler1986: Lol. Google it
May 12, 2015 5:24 PM - Bill Monroe: i did.. it's just a trailer rental
May 12, 2015 5:24 PM - Bill Monroe: that house would be an awesome porno location though
May 12, 2015 5:24 PM - jbigler1986: Your chapter is the best chapter. No way am I leaving it out
May 12, 2015 5:26 PM - Mike Glass: unibomber Bill?
May 12, 2015 5:26 PM - Bill Monroe: dunno
May 12, 2015 5:26 PM - Bill Monroe: here's a vid of the place... check out the bedroom..
May 12, 2015 5:27 PM - Bill Monroe: about 1:35
May 12, 2015 5:28 PM - Bill Monroe: they used it for some scenes in the star trek restart.. mostly the balcony
May 12, 2015 5:29 PM - Bill Monroe: I got to meet Ben Cross and Winona Ryder
May 12, 2015 5:29 PM - jbigler1986: Gotta be porn
May 12, 2015 5:29 PM - Mike Glass: holy f###
May 12, 2015 5:29 PM - jbigler1986: Gonna be called "Joshua Three"
May 12, 2015 5:29 PM - Bill Monroe: BAHAHAHAHh
May 12, 2015 5:30 PM - Mike Glass: haha
May 12, 2015 5:33 PM - Mike Kelly: what color should i print aria in
May 12, 2015 5:33 PM - Bill Monroe: pink
May 12, 2015 5:37 PM - jbigler1986: Neon green
May 12, 2015 5:37 PM - Bill Monroe: clear.. then shove a red LED up its butt
May 12, 2015 5:38 PM - jbigler1986: Woah
May 12, 2015 5:38 PM - Bill Monroe: dragons get'roids too
May 12, 2015 5:38 PM - jbigler1986: MK are you printing it on 1.6?
May 12, 2015 5:39 PM - jbigler1986: Got the robo going at 70mm/s right now
May 12, 2015 5:39 PM - Mike Glass: im doing green now
May 12, 2015 5:40 PM - Mike Glass: http://vaughnlive.tv/coolreactions
May 12, 2015 5:40 PM - Bill Monroe: durn led light stip on my robo keeps falling off
May 12, 2015 5:40 PM - jbigler1986: The aria?
May 12, 2015 5:42 PM - jbigler1986: Why does vaughnlive have to use flash
May 12, 2015 5:42 PM - Bill Monroe: cuz it's lame
May 12, 2015 5:43 PM - Bill Monroe: woooo got the blueray of my raceday... now I can watch me go too slow in hi-res
May 12, 2015 5:53 PM - jbigler1986: Wonder how fast the robo can go non bowden without it failing
May 12, 2015 5:53 PM - Bill Monroe: i had mine cranked pretty high today
May 12, 2015 5:53 PM - Bill Monroe: wait.. let me see
May 12, 2015 5:54 PM - jbigler1986: Up to 72mm/s now
May 12, 2015 5:55 PM - Bill Monroe: ah.. my top speed today was 60
May 12, 2015 5:55 PM - Bill Monroe: but that's the fastest I had it.. with XT no less
May 12, 2015 5:56 PM - jbigler1986: About to go up to 80
May 12, 2015 5:56 PM - Bill Monroe: lightweight... go for 100
May 12, 2015 5:56 PM - jbigler1986: Lol
May 12, 2015 5:56 PM - Bill Monroe: make it walk across the room
May 12, 2015 6:12 PM - Mike Glass: Jb how many shells did you use on Aria
May 12, 2015 6:14 PM - Mike Kelly: jb i am printing one on the 1.6
May 12, 2015 6:14 PM - Mike Kelly: i can do neon green, my pink is at work
May 12, 2015 6:15 PM - Mike Glass: thats what Im basically using
May 12, 2015 6:15 PM - Mike Kelly: also i've seen someone print at 100mm/s on stock
May 12, 2015 6:16 PM - Mike Glass: I did 150
May 12, 2015 6:16 PM - Mike Glass: with a plotter pen.
May 12, 2015 6:17 PM - Bill Monroe: cheat-oo
May 12, 2015 6:17 PM - Mike Glass: I found MEK yesterday at lowes.
May 12, 2015 6:17 PM - Bill Monroe: real stuff?
May 12, 2015 6:18 PM - Mike Glass: yea, couldnt believe it
May 12, 2015 6:19 PM - Bill Monroe: did you buy it ALL?
May 12, 2015 6:19 PM - Mike Glass: Only bought 1 gal, I didnt want them to call the local Hidta office.
May 12, 2015 6:20 PM - Bill Monroe: where are you again?
May 12, 2015 6:20 PM - Mike Glass: Capitol of MT
May 12, 2015 6:20 PM - Bill Monroe: ah.. Fargo
May 12, 2015 6:20 PM - Bill Monroe:
May 12, 2015 6:20 PM - Mike Glass: yup
May 12, 2015 6:24 PM - Mike Glass: did your part finish bill?
May 12, 2015 6:28 PM - Mike Kelly: alright printing aria now
May 12, 2015 6:32 PM - Mike Glass: your gonna catch up to me quick
May 12, 2015 6:33 PM - Mike Glass: what infill and shell you using
May 12, 2015 6:33 PM - Mike Glass: Im doing a 1.5 scale though
May 12, 2015 6:33 PM - Mike Kelly: I'm just doing 10%
May 12, 2015 6:34 PM - Mike Glass: I should of went less Im at 35%
May 12, 2015 6:34 PM - Mike Glass: what shell thickness?
May 12, 2015 6:36 PM - Mike Kelly: 1.2mm or 3 shells
May 12, 2015 6:37 PM - Mike Glass: same for top layers?
May 12, 2015 6:38 PM - Mike Kelly: 1.0 for them

 

May 12, 2015 6:40 PM - jbigler1986: Does it have to be a multiple of layer height?
May 12, 2015 6:41 PM - jbigler1986: Or is it a multiple of nozzle size?
May 12, 2015 6:42 PM - Mike Glass: Nozzle I thought
May 12, 2015 6:43 PM - Mike Glass: But I'm just an amateur only my 5th month
May 12, 2015 6:44 PM - Mike Glass: And robo will be out of warranty soon
May 12, 2015 6:51 PM - jbigler1986: MK where are you will the answer
May 12, 2015 6:51 PM - jbigler1986: If it's nozzle then no wonder my. 8 nozzle prints look like crap
May 12, 2015 6:59 PM - Mike Kelly: Top and bottom are multiples of layer height. Shell is nozzle width
May 12, 2015 7:05 PM - Mike Glass: ha you caught up to me Mike
May 12, 2015 7:05 PM - jbigler1986: So she'll thickness if using 8 should be like 2.4?
May 12, 2015 7:05 PM - jbigler1986: Shell*
May 12, 2015 7:06 PM - jbigler1986: MK where is your stream?
May 12, 2015 7:07 PM - Mike Glass: I use 1.6 with a .8 JB
May 12, 2015 7:07 PM - Mike Kelly: http://www.ustream.tv/channel/ride-along-my-robo-3d
May 12, 2015 7:08 PM - Mike Kelly: PLA mike?
May 12, 2015 7:09 PM - jbigler1986: Well that was just an example. Probably explains why mine doesn't look the best. Always just left it at 1.2
May 12, 2015 7:09 PM - Mike Glass: JustPla
May 12, 2015 7:09 PM - Mike Glass: cura would warn you if you didnt have it correct
May 12, 2015 7:10 PM - jbigler1986: Never changed it for 8 nozzle
May 12, 2015 7:10 PM - jbigler1986: Learn something new everyday
May 12, 2015 7:11 PM - jbigler1986: MK it's looking good
May 12, 2015 7:11 PM - jbigler1986: MG I can't see yours bc of stupid flash
May 12, 2015 7:13 PM - Mike Glass: yeah nobody uses flash these days
May 12, 2015 7:14 PM - jbigler1986: To buggy on lots of devices
May 12, 2015 7:15 PM - jbigler1986: http://m.ustream.tv/channel/jbigler1986 74mm/s
May 12, 2015 7:17 PM - Mike Glass: What speed you running MIke
May 12, 2015 7:43 PM - Mike Glass: something happend on yours Mike

 

May 13, 2015 12:36 AM - bamhm182: Hey everyone, haven't been on during the days for a few days, but I'm just about ready to try my bamhm182's Greg's Wade Reloaded. I'll upload share some pictures once I'm on at a reasonable time and have it together. I'm going to have to end up turning the Wade around 180 degrees though so I can access the filament hole a bit easier. Right now it is facing the pegboard
May 13, 2015 12:54 AM - bamhm182: Anyone know where I can buy a little M8 smooth rod piece that goes inside the guide on the Greg's Wade?
May 13, 2015 1:02 AM - bamhm182: Actually, I'm kind of wondering if I could/should just print that off. Also, I know nobody's on, just kind of hoping whoever gets on will respond to my messages and either I'll be on or I'll see them after they're posted
May 13, 2015 4:33 AM - jbigler1986: Morning
May 13, 2015 4:37 AM - bamhm182: Morning, how's it going?
May 13, 2015 4:48 AM - jbigler1986: good. you?
May 13, 2015 4:51 AM - Stephen Capistron: morning
May 13, 2015 4:52 AM - bamhm182: Not too bad, I've needed to pass one CLEP test in order to get my Associates so I can move onto a bachelor's for a few months now, decided I'm going to do that this morning
May 13, 2015 4:52 AM - bamhm182: Also printing out bamhm182's Greg's Wade Reloaded Version 2
May 13, 2015 4:52 AM - bamhm182: It needs more words
May 13, 2015 4:53 AM - jbigler1986: lol
May 13, 2015 4:54 AM - bamhm182: I think it should work out alright though. We'll find out
May 13, 2015 4:54 AM - bamhm182: What is it that you were printing a bunch of last night, jb?
May 13, 2015 4:54 AM - bamhm182: I jumped on here for a moment at "lunch" and saw your feed
May 13, 2015 4:55 AM - jbigler1986: http://www.thingiverse.com/thing:395231
May 13, 2015 4:56 AM - jbigler1986: it's going to be a lot bigger than i though. hell printing 3 of the 4 legs and it's taking up most of the bed
May 13, 2015 4:56 AM - jbigler1986: cranking up my printing speeds too
May 13, 2015 4:56 AM - jbigler1986: printed all of those pieces at 74mm/s and they all came out beautiful
May 13, 2015 4:59 AM - bamhm182: Nice, what's with all the dragons recently?
May 13, 2015 4:59 AM - bamhm182: I feel like I missed something, haha
May 13, 2015 4:59 AM - Stephen Capistron: game of thrones started back up
May 13, 2015 5:00 AM - jbigler1986: never seen it
May 13, 2015 5:00 AM - Stephen Capistron: i'm only through season 3
May 13, 2015 5:02 AM - jbigler1986:
May 13, 2015 5:03 AM - jbigler1986: That was at 95mm/s this morning. Just a quick test
May 13, 2015 5:04 AM - jbigler1986: i need to turn down the resolution on my phone. holy crap
May 13, 2015 5:34 AM - jbigler1986: sweet. it's on sale again http://www.frys.com/product/8394507?site=sa:adpages page:P15_SUN date:051015
May 13, 2015 5:50 AM - Stephen Capistron: that is cheap
May 13, 2015 5:50 AM - Stephen Capistron: hell its list price is cheap, never mind the sale price
May 13, 2015 5:52 AM - jbigler1986: glad i didn't build a mini pc yet
May 13, 2015 6:00 AM - jbigler1986: wonder if that can handle streaming video and having printer connected at the same time
May 13, 2015 6:01 AM - jbigler1986: crappy laptop i use now can only do one at a time before it hits usb bandwidth issues
May 13, 2015 6:04 AM - Stephen Capistron: what about just a stand alone camera that has built-in wifi
May 13, 2015 6:06 AM - jbigler1986: only ones i saw were crappy quality. also were like over $100
May 13, 2015 6:09 AM - Stephen Capistron: cheaper than the computer
May 13, 2015 6:10 AM - Stephen Capistron: none in HD?
May 13, 2015 6:11 AM - jbigler1986: this is one of the best http://www.amazon.com/Dropcam-Wirel...953&creativeASIN=B00F9FCW7K&ascsubtag=WC28285
May 13, 2015 6:13 AM - Stephen Capistron: i did a little better, but yeah these are pricey
May 13, 2015 6:13 AM - Stephen Capistron: http://www.amazon.com/Samsung-Smart...2766&sr=8-2&keywords=streaming+camera+wifi+hd
May 13, 2015 6:15 AM - jbigler1986: if they could be battery powered I would probably get one. still needing a cord I might go with that asus pc
May 13, 2015 6:16 AM - jbigler1986: if it can't handle both at the same time I could just return it
May 13, 2015 6:18 AM - jbigler1986: holy crap on the angle of viewing from that samsung one
May 13, 2015 6:39 AM - jbigler1986: samsung one is nice
May 13, 2015 6:42 AM - Stephen Capistron: you could surround your printer in up to 10 of them
May 13, 2015 6:43 AM - jbigler1986: yes. $1600 just for cameras. now we are talking
May 13, 2015 6:44 AM - Stephen Capistron: most of an ultimaker or 10 cameras? hmmmmm
May 13, 2015 6:44 AM - Stephen Capistron: tough call
May 13, 2015 6:45 AM - jbigler1986: that's an easy one
May 13, 2015 6:46 AM - jbigler1986: fry's or bestbuy better not carry UM2. I will be there the day it's available in a store
May 13, 2015 7:11 AM - Mike Kelly: morning
May 13, 2015 7:11 AM - Mike Kelly: http://i.imgur.com/ihH1kfg.jpg mother nature is awesome, lightning struck tree
May 13, 2015 7:11 AM - jbigler1986: morning
May 13, 2015 7:17 AM - jbigler1986: what happened to your dragon
May 13, 2015 7:17 AM - Mike Kelly: poo
May 13, 2015 7:17 AM - Mike Kelly: lots and lots of poo
May 13, 2015 7:17 AM - Mike Kelly: 60mm/s was way too fast
May 13, 2015 7:18 AM - jbigler1986: for that yeah
May 13, 2015 7:18 AM - Mike Kelly: i should try with simplify3d
May 13, 2015 7:18 AM - Mike Kelly: my robostein sucks at fine detail, it's annoying
May 13, 2015 7:19 AM - Mike Glass: hey brohemis
May 13, 2015 7:19 AM - Mike Kelly: sup
May 13, 2015 7:19 AM - Mike Glass: http://imgur.com/a/T7Kcq what I woke up to this morning
May 13, 2015 7:20 AM - Mike Kelly: kick ass
May 13, 2015 7:20 AM - Mike Kelly: what material
May 13, 2015 7:20 AM - Mike Glass: JustPLA
May 13, 2015 7:21 AM - Mike Glass: 14 hours
May 13, 2015 7:21 AM - Mike Kelly: very nice
May 13, 2015 7:21 AM - jbigler1986: looks great
May 13, 2015 7:22 AM - jbigler1986: this freaking ender dragon is going to take longer that i thought. it's way bigger than i anticipated
May 13, 2015 7:23 AM - Mike Kelly: how big is it
May 13, 2015 7:23 AM - Mike Glass: yeah that look big JB, cant wait to see it finished
May 13, 2015 7:23 AM - jbigler1986: well 2 front legs and 1 back leg takes up most of the build plate
May 13, 2015 7:24 AM - jbigler1986: i would say it's going to end up being over a foot long
May 13, 2015 7:24 AM - Mike Glass: Im going to do another color tonight and scale it between these two, and maybe up the speed a little.
May 13, 2015 7:25 AM - Mike Glass: We call our kids the dragons so it will fit perfect
May 13, 2015 7:25 AM - jbigler1986: nice
May 13, 2015 7:25 AM - jbigler1986: i'm printing at 75mm/s right now
May 13, 2015 7:25 AM - Mike Glass: So I will do blue one tonight for our middle boy
May 13, 2015 7:25 AM - Mike Kelly: at 1.25/
May 13, 2015 7:26 AM - Mike Glass: I had room to go higher Mike
May 13, 2015 7:27 AM - Mike Glass: I forgot to measure this morning but will tonight and get the max that mine will go without crashing
May 13, 2015 7:28 AM - Mike Kelly: nice
May 13, 2015 7:31 AM - Mike Glass: I took off the shrouds last night so see if there was any difference in printing, I think it is better with them on, you can see on the tips are nicer on the smaller aria.
May 13, 2015 7:31 AM - jbigler1986: i started snapping the pieces together this morning and I was like holy shit. this is gonna be huge
May 13, 2015 7:32 AM - jbigler1986: could also be different color as well
May 13, 2015 7:33 AM - Mike Kelly: did you guys see this: http://3dprint.com/64588/walmart-best-buy-top-3d-print
May 13, 2015 7:33 AM - jbigler1986: i did
May 13, 2015 7:33 AM - jbigler1986: robo is doing fine
May 13, 2015 7:34 AM - Mike Kelly: def
May 13, 2015 7:34 AM - Mike Glass: wow 10% is great
May 13, 2015 7:34 AM - Mike Kelly: to think they were pretty close to going under last year
May 13, 2015 7:34 AM - jbigler1986: probably one of the reasons they don't want to release R2 yet
May 13, 2015 7:34 AM - Mike Kelly: yup
May 13, 2015 7:34 AM - Mike Glass: I almost bought the xyz but didnt like being tied to their filament
May 13, 2015 7:34 AM - Mike Kelly: i hate that damn printer
May 13, 2015 7:35 AM - Mike Kelly: and everything XYZ stands for
May 13, 2015 7:35 AM - Mike Glass: They are super cheap
May 13, 2015 7:35 AM - Mike Kelly: i hope everyone cracks theirs and selling printers at a loss eventually bites them in the ass
May 13, 2015 7:35 AM - jbigler1986: they need to high five more people on the forum
May 13, 2015 7:35 AM - jbigler1986: If it wasn't for the forum I may not have bought it

 

May 13, 2015 7:36 AM - Mike Glass: for sure JB.^
May 13, 2015 7:36 AM - Mike Glass: or nerdGasm Jerry
May 13, 2015 7:37 AM - Mike Kelly: looking at the best seller market share
May 13, 2015 7:37 AM - jbigler1986: yeah him too. But reading through the forum did it for me
May 13, 2015 7:37 AM - Mike Kelly: aleph objects are listed twice
May 13, 2015 7:37 AM - Mike Kelly: and 3Doodler is top?
May 13, 2015 7:37 AM - Mike Kelly: printrbot is also twice
May 13, 2015 7:37 AM - Mike Kelly: 3dprint.com is the worst website
May 13, 2015 7:39 AM - Mike Glass: it is crap
May 13, 2015 7:39 AM - daniel871: Yeah, the Barnacules video in the Amazon.com review for the Robo was the biggest reason I went with it for my first 3D printer.
May 13, 2015 7:40 AM - jbigler1986: i didn't look at it on amazon
May 13, 2015 7:40 AM - daniel871: There was very little information on any of the others, the Robo had a bigger printed object capacity for the price and it was on sale for about $700 when I got it.
May 13, 2015 7:41 AM - daniel871: Plus Prime shipping.
May 13, 2015 7:42 AM - Mike Glass: yeah I missed it on that price, that was black friday pricing right?
May 13, 2015 7:43 AM - jbigler1986: i don't like to order big expensive stuff like that online if I can help it
May 13, 2015 7:43 AM - Stephen Capistron: Come on, live life on the edge
May 13, 2015 7:43 AM - daniel871: I wouldn't have either if it wasn't Amazon.
May 13, 2015 7:44 AM - daniel871: First printer delivery was left out in the rain without even so much as a plastic bag around the box. Amazon ate the return shipping and sent me another one the same day I reported it.
May 13, 2015 7:45 AM - jbigler1986: and that's why. fedex and ups are horrible with large packages
May 13, 2015 7:45 AM - jbigler1986: Ups is a little better
May 13, 2015 7:46 AM - daniel871: This was FedEx for the first shipment. They contract out to guys with Uhaul trucks for rural areas. UPS deliveries are actual UPS trucks and drivers.
May 13, 2015 7:46 AM - daniel871: Second shipment went UPS and everything was fine.
May 13, 2015 7:46 AM - jbigler1986: they are better
May 13, 2015 7:47 AM - daniel871: This was back in early April of this year as some kind of "This thing on your wish list is on sale at X price for the next two hours, buy it now!" thing.
May 13, 2015 7:47 AM - jbigler1986: amazon ate the shipping cost right away but i can gurantee you that fedex ended up paying it back
May 13, 2015 7:48 AM - jbigler1986: nice find
May 13, 2015 7:48 AM - daniel871: I hope they did! I submitted a bunch of photos on the complaint form specifically so they could do that.
May 13, 2015 7:48 AM - daniel871: Hope it filtered back down to the guy that left it like that too, but that's probably too much to hope for.
May 13, 2015 7:49 AM - jbigler1986: yeah doubt it went that far. might have though
May 13, 2015 7:51 AM - jbigler1986: i remember when you use to either have to sign for a package or pick it up from the shipper. now they just drop that shit off. Fedex anyways
May 13, 2015 7:52 AM - Stephen Capistron: i hate having to sign
May 13, 2015 7:52 AM - Stephen Capistron: it is an option when you are shipping something yourself though
May 13, 2015 7:53 AM - jbigler1986: that it is
May 13, 2015 7:53 AM - daniel871: I hate having to sign as well, that means being forced to take a vacation day to take delivery because the time UPS or FedEx shows up is utterly random.
May 13, 2015 7:54 AM - jbigler1986: that's why i started shipping everything to my work
May 13, 2015 7:54 AM - daniel871: Yeah, that stopped being an option the first time a nosey fucker opened my delivery before giving it to me.
May 13, 2015 7:54 AM - Stephen Capistron: you did that so it is less obvious to the boss
May 13, 2015 7:58 AM - Mike Glass: man, im going to start putting things on a wishlist..lol
May 13, 2015 7:59 AM - jbigler1986: yeah I just added that smartcam that SC posted. very tempting (not just for my printer)
May 13, 2015 8:01 AM - Stephen Capistron: https://thetracktor.com/ < gives you the amazon price history so you can tell if it is a real sale or a "hey look this is 21% off, even though it is normally listed at 20% off"
May 13, 2015 8:02 AM - Mike Glass: I have one of these, its nice. http://www.amazon.com/Astak-Wireles...&ie=UTF8&qid=1431529340&sr=1-4&keywords=aztak
May 13, 2015 8:09 AM - jbigler1986: that base is huge
May 13, 2015 8:09 AM - daniel871: I'm going to be so happy once I finish buying/printing all the little add-ons and modifications for the Robo.
May 13, 2015 8:09 AM - jbigler1986: you will never be finished
May 13, 2015 8:10 AM - daniel871: Stainless nozzles for the metal/abrasive filaments, regular nozzles for the PLA/T-glase/etc. bits. Get all the processes setup for the different filaments and print some toys.
May 13, 2015 8:11 AM - Mike Glass: its a PTZ 270 degrees
May 13, 2015 8:11 AM - daniel871: ?
May 13, 2015 8:11 AM - Mike Glass: the camera Daniel
May 13, 2015 8:11 AM - jbigler1986: you will keep upgrading it. mine is printing perfectly and yet I still keep wanting to change stuff
May 13, 2015 8:12 AM - Mike Glass: Im leaving mine stock, all you need is a lcd
May 13, 2015 8:13 AM - Stephen Capistron: ^ not stock ;p
May 13, 2015 8:13 AM - jbigler1986: and to fix the couplers. whatever route you want to take to achieve that
May 13, 2015 8:13 AM - Mike Glass: ok not stock, I do have a dual fan holder, woopie
May 13, 2015 8:16 AM - jbigler1986: there is a reason robo is making new machine that remove that stupid coupler. it sucks
May 13, 2015 8:16 AM - daniel871: Only issue I'm having since getting the E3D running is printing in the weirder filaments.
May 13, 2015 8:17 AM - daniel871: SST filament will run fine for about an hour, then something inevitably breaks somewhere outside the extruder and if I'm not watching when it happens the filament runs on out past the gear and stops while the printer keeps going.
May 13, 2015 8:18 AM - daniel871: Which bugs the hell out of me, if the filament was that brittle you'd think it would snap as soon as the slack was taken out of the line, but it's a good four or five revolutions of the spool before it happenes.
May 13, 2015 8:18 AM - daniel871: happens
May 13, 2015 8:19 AM - daniel871: (and always after I walk away to do something else)
May 13, 2015 8:19 AM - jbigler1986: where do you have your spool
May 13, 2015 8:19 AM - daniel871: Directly above the printer on that spool mount for the Robo on Thingiverse.
May 13, 2015 8:19 AM - daniel871: It hooks into the slot on top.
May 13, 2015 8:20 AM - daniel871: Doesn't stop it from dragging on the edge of the slot as it pulls in though.
May 13, 2015 8:20 AM - daniel871: Hm...
May 13, 2015 8:21 AM - jbigler1986: yeah you are going to have that with almost any spool holder
May 13, 2015 8:21 AM - daniel871: Maybe a ridiculously tall one would stop that?
May 13, 2015 8:22 AM - jbigler1986: doubt it
May 13, 2015 8:22 AM - daniel871: Wait, no, you'd have to have something pulling the filament in line no matter what.
May 13, 2015 8:22 AM - jbigler1986: maybe using ptfe tube will help
May 13, 2015 8:24 AM - daniel871: Between the spool and the slot or between the slot and the extruder?
May 13, 2015 8:24 AM - jbigler1986: slot and extruder
May 13, 2015 8:24 AM - daniel871: Will the tube fit thru the slot?
May 13, 2015 8:24 AM - daniel871: (Can't measure it right now)
May 13, 2015 8:25 AM - jbigler1986: so the ptfe tube would rub on the slot and not the actual filament
May 13, 2015 8:25 AM - daniel871: Hm...
May 13, 2015 8:25 AM - jbigler1986: yeah. 4mm outside diameter of ptfe tube
May 13, 2015 8:29 AM - daniel871: After I clean the E3D out again I'll try putting a piece of PTFE tubing leftover from the E3D install in that slot and fix it in place and try printing again.
May 13, 2015 8:33 AM - daniel871: Or figure out a way for it to float in the slot if fixing it in place is a bad idea.
May 13, 2015 8:33 AM - daniel871: (I can just see the extruder torquing funny pulling on the filament and snapping it anyway even with the PTFE tube if it's fixed)
May 13, 2015 8:35 AM - jbigler1986: if you had long enough piece of ptfe it could go all the way to the top of the extruder
May 13, 2015 8:37 AM - Mike Kelly: i swear this place is always busiest when i'm in a meeting
May 13, 2015 8:37 AM - jbigler1986: lol
May 13, 2015 8:39 AM - daniel871: Yeah, but then the top end would run into the spool if I print something really tall.
May 13, 2015 8:40 AM - jbigler1986: then it would bend just like bowden
May 13, 2015 8:45 AM - jbigler1986: MK thinking about trying bowden again once I get the adapter from you
May 13, 2015 8:48 AM - jbigler1986: MK how do I make curved text in SW. Not on a model. Just text itself
May 13, 2015 8:49 AM - Stephen Capistron: you can't just pick a construction arc to follow?
May 13, 2015 8:49 AM - Mike Kelly: hmm
May 13, 2015 8:49 AM - Mike Kelly: curved in what way
May 13, 2015 8:50 AM - jbigler1986: just like have an arc to it
May 13, 2015 8:50 AM - Stephen Capistron: if you are looking to put embossed letters on a cup you are in for a world of hurt
May 13, 2015 8:51 AM - jbigler1986: not doing that
May 13, 2015 8:51 AM - Stephen Capistron: draw the arc, make it a construction line and go to town then no?
May 13, 2015 8:51 AM - jbigler1986:
May 13, 2015 8:51 AM - jbigler1986: something like that
May 13, 2015 8:51 AM - Mike Kelly: ah
May 13, 2015 8:52 AM - Mike Kelly: i like the flex command
May 13, 2015 8:52 AM - Mike Kelly: but yeah stephen is right
May 13, 2015 8:53 AM - Mike Kelly: https://www.dropbox.com/s/c84n609w4imt2qc/curved text.PNG?dl=0
May 13, 2015 8:55 AM - jbigler1986: bam

 

May 13, 2015 8:55 AM - Mike Kelly: stephen embossed letters are easy
May 13, 2015 8:55 AM - Stephen Capistron: around a curved surface?
May 13, 2015 8:56 AM - jbigler1986: thank you
May 13, 2015 8:56 AM - jbigler1986: yes
May 13, 2015 8:56 AM - jbigler1986: there is a tool for that
May 13, 2015 8:56 AM - Stephen Capistron: wrap?
May 13, 2015 8:56 AM - jbigler1986: yeah
May 13, 2015 8:56 AM - jbigler1986: tried it on something. don't remember what but it worked great
May 13, 2015 8:57 AM - Mike Glass: Hey Mike did you see my F up on the autolevel.. im such a fucktard
May 13, 2015 8:57 AM - Mike Kelly: no what did you do
May 13, 2015 9:04 AM - bamhm182: Passed my clep test, now I'm done with my degree for the Air Force and can start electrical engineering
May 13, 2015 9:07 AM - Mike Glass: I designed it on the x axis support, so it does not move on the z axis.
May 13, 2015 9:08 AM - Bill Monroe: 84 people laid off and they didnt take me with them.. dangit
May 13, 2015 9:10 AM - jbigler1986: wow. that sux bill
May 13, 2015 9:10 AM - jbigler1986: you only have a year left anyways
May 13, 2015 9:11 AM - Stephen Capistron: I know, no one said, hey lets just give this guy early retirement?
May 13, 2015 9:11 AM - Bill Monroe: heh ya, they wont lay me off unless it's a major overhaul
May 13, 2015 9:12 AM - Bill Monroe: company has a practice where, if they lay someone off within 5 years of full retirement age, they parachute them
May 13, 2015 9:12 AM - Bill Monroe: 2 people that left today got that... i am SO jealous
May 13, 2015 9:14 AM - Stephen Capistron: Smiling ear to ear for being laid off
May 13, 2015 9:15 AM - Bill Monroe: not just that.. they're buying at the chile's afterwork
May 13, 2015 9:15 AM - bamhm182: Well there's a plus
May 13, 2015 9:16 AM - Bill Monroe: what.. bam has the clep?? they got meds that can take care of that
May 13, 2015 9:18 AM - bamhm182: haha
May 13, 2015 9:18 AM - Bill Monroe: oooo just got summoned to a 9:30 meeting.. maybe I get to go afterall?
May 13, 2015 9:18 AM - bamhm182: got the clep test this week, the staff test last week, feel like both were positive. I'm in bad shape, doc
May 13, 2015 9:19 AM - Mike Kelly: good luck?
May 13, 2015 9:19 AM - jbigler1986: cross your fingers
May 13, 2015 9:19 AM - bamhm182: I won't find out until August. No use worrying about it now, haha
May 13, 2015 9:19 AM - bamhm182: Thanks though
May 13, 2015 9:19 AM - Bill Monroe: ya, I'll need it.. most likely it;s the meeting they always call after a layoff to soothe the crybabys that think they're next
May 13, 2015 9:19 AM - bamhm182: I think I did well, which means I should have an extra $100 a month to blow on random things
May 13, 2015 9:20 AM - bamhm182: Oh, wait, yeah, good luck, Bill.
May 13, 2015 9:20 AM - Mike Kelly: the fan i put in the rep2x already died
May 13, 2015 9:20 AM - bamhm182: And to further crush the dreams of those who didn't get let off
May 13, 2015 9:20 AM - Mike Kelly: first fan i killed that wasn't even my fault
May 13, 2015 9:20 AM - bamhm182: What is it with all these fans recently?
May 13, 2015 9:21 AM - Bill Monroe: i've *never* had a fan die
May 13, 2015 9:21 AM - bamhm182: My heatsink fan is starting to go out too
May 13, 2015 9:21 AM - TechSupportGo: the fans, they blow
May 13, 2015 9:21 AM - TechSupportGo: lol
May 13, 2015 9:21 AM - Mike Kelly: i'm kinda torn, i'd like my company to be successful to make my stake worthwhile, but getting laid off would be ok too
May 13, 2015 9:21 AM - bamhm182: You totally just jinxed yourself, Bill
May 13, 2015 9:21 AM - Bill Monroe: i'm not superstitious
May 13, 2015 9:22 AM - Mike Kelly: sharp tools + spinning fans = certain death
May 13, 2015 9:22 AM - bamhm182: Yeeeeah
May 13, 2015 9:22 AM - bamhm182: tools in general + spinning fans = certain death
May 13, 2015 9:22 AM - Mike Kelly: no idea what happened this time
May 13, 2015 9:23 AM - bamhm182: Just chipped a blade off my parts fan last week
May 13, 2015 9:23 AM - Mike Kelly: i think the circuit that enables the fan died because it runs all the time
May 13, 2015 9:23 AM - Mike Kelly: and then running all the time caused it to die? i dunno
May 13, 2015 9:23 AM - Bill Monroe: guess I'll meander down to the metting room...
May 13, 2015 9:23 AM - Mike Kelly: i've got new fans coming in today
May 13, 2015 9:23 AM - Bill Monroe: err meeting
May 13, 2015 9:23 AM - Stephen Capistron: a crap fan should be good for over 10,000 hours
May 13, 2015 9:23 AM - Stephen Capistron: good magnetic ones can do 70,000
May 13, 2015 9:23 AM - bamhm182: Ideally
May 13, 2015 9:23 AM - Mike Kelly: right? it doesn't make sense
May 13, 2015 9:24 AM - bamhm182: My first heat sink fan went out shortly after I got my printer, Robo sent me a new one, and that one is going out now, so I don't know how much I trust the longevity of small fans
May 13, 2015 9:24 AM - Mike Kelly: 25mm are a real crap shoot
May 13, 2015 9:25 AM - Mike Kelly: either they're quiet but push no air
May 13, 2015 9:25 AM - Mike Kelly: or insanely loud and decent air
May 13, 2015 9:25 AM - Stephen Capistron: go with a sunon
May 13, 2015 9:25 AM - Stephen Capistron: as thick as will fit
May 13, 2015 9:25 AM - bamhm182: I really like this 40mm fan I got, I may just have to figure out a way to use two of those for parts and a third for the heatsink
May 13, 2015 9:26 AM - bamhm182: Or we could just go with those fans MG has, get three of those on there, haha
May 13, 2015 9:26 AM - Mike Kelly: the stupid hexagon is sooo short
May 13, 2015 9:27 AM - TechSupportGo: black widow !!!!
May 13, 2015 9:27 AM - bamhm182: Was that yours TechSupportGo?
May 13, 2015 9:27 AM - bamhm182: I was stalking and ran across that the other day, I'm not going to lie, that thing looks absolutely amazing
May 13, 2015 9:28 AM - Mike Kelly: tsg did you ever check Z_max
May 13, 2015 9:29 AM - bamhm182: I may have to look into something like that when I move my printer into a place that isn't my bedroom
May 13, 2015 9:29 AM - jbigler1986: you guys and your fans/shrouds
May 13, 2015 9:29 AM - bamhm182: haha
May 13, 2015 9:30 AM - Stephen Capistron: i missed something. black widow?
May 13, 2015 9:31 AM - bamhm182: You need to see a picture of this thing, it's outstanding
May 13, 2015 9:31 AM - bamhm182: http://www.frozencpu.com/products/6...124028BL.html?tl=g36c15s575&id=JiQnEnGU#blank
May 13, 2015 9:31 AM - bamhm182: Two of those strapped onto the carriage
May 13, 2015 9:32 AM - bamhm182: Used for parts fans
May 13, 2015 9:35 AM - jbigler1986: only 8.9cfm
May 13, 2015 9:36 AM - jbigler1986: my current ones are like 6.3
May 13, 2015 9:36 AM - Mike Glass: I have some 40cfm fans
May 13, 2015 9:37 AM - jbigler1986: yeah pretty sure that would blow the filament. lol
May 13, 2015 9:38 AM - bamhm182: The ones I just linked to were random ones I found that were the same size
May 13, 2015 9:38 AM - Mike Glass: its like a jet talking off though
May 13, 2015 9:39 AM - bamhm182: Yeah, which is why I would need it in a room besides my bedroom
May 13, 2015 9:39 AM - jbigler1986: TSG do you have a link to the ones you are using
May 13, 2015 9:40 AM - jbigler1986: i would rather go with 1 blower fan
May 13, 2015 9:40 AM - jbigler1986: MK youa re using a blower fan right?
May 13, 2015 9:41 AM - Mike Kelly: no
May 13, 2015 9:41 AM - Mike Kelly: i bought a couple though
May 13, 2015 9:41 AM - bamhm182: blower fans = part fans?
May 13, 2015 9:41 AM - jbigler1986: i just assumed you installed them. my bad
May 13, 2015 9:41 AM - Mike Kelly: no it's a style
May 13, 2015 9:42 AM - Mike Kelly: also called squirrel cage
May 13, 2015 9:42 AM - Mike Kelly: radial blower
May 13, 2015 9:42 AM - bamhm182: Oh, right
May 13, 2015 9:42 AM - Stephen Capistron: i have one i have not installed. I wasn't impressed with it just hot wired in to see what it was like
May 13, 2015 9:43 AM - bamhm182: I have some of those in my projector, I keep meaning to see if I can swap them out for quieter ones
May 13, 2015 9:44 AM - Stephen Capistron: I keep thinking that the blade geometry is likely less than optimal, but easy to make.

 

May 13, 2015 9:44 AM - jbigler1986: 40mm fans are working just fine for me
May 13, 2015 9:45 AM - Stephen Capistron: i have an older one of these > http://pitmasteriq.com/products/automatic-temperature-control/iq110.html < which I need to try and figure out which brand of blower is in ther. Because it works very well.
May 13, 2015 9:46 AM - Mike Kelly: what is it
May 13, 2015 9:47 AM - Stephen Capistron: bbq temperature controller
May 13, 2015 9:48 AM - jbigler1986: mmmmmm
May 13, 2015 9:48 AM - bamhm182: Omnom
May 13, 2015 9:49 AM - Stephen Capistron: set it at night, go to bed, and delicious food by lunch time the next day
May 13, 2015 9:52 AM - Mike Kelly: like a grill crock pot
May 13, 2015 9:53 AM - Stephen Capistron: So you don't have to check on and mess with the smoker every couple of hours
May 13, 2015 9:54 AM - jbigler1986: where is the fun in that
May 13, 2015 9:56 AM - jbigler1986: part of the fun of smoking is the attention you have to give it
May 13, 2015 9:57 AM - bamhm182: I'm rewatching the Star Wars movies before the new one comes out in December. Haven't watched them since I was a kid, it's been too long
May 13, 2015 9:58 AM - jbigler1986: i haven't watched any of them
May 13, 2015 9:58 AM - bamhm182: I think I watched most of them when I was a kid, they're definitely worth watching
May 13, 2015 9:59 AM - Mike Kelly: wow never jb?
May 13, 2015 10:00 AM - jbigler1986: nope
May 13, 2015 10:00 AM - jbigler1986: scifi is not my thing
May 13, 2015 10:00 AM - Mike Kelly: yeah but they're classics
May 13, 2015 10:01 AM - bamhm182: what he said
May 13, 2015 10:01 AM - jbigler1986: true, but just not interested. someday maybe
May 13, 2015 10:02 AM - Mike Kelly: at least the originals, I-III are crap
May 13, 2015 10:02 AM - Mike Kelly: they're worth watching even if you're not into sci-fi
May 13, 2015 10:03 AM - jbigler1986: it's hard for me to sit and watch a movie though. once my kids go to bed i have a thousand other things to do
May 13, 2015 10:04 AM - Mike Kelly: i totally hear that
May 13, 2015 10:04 AM - Mike Kelly: i barely have the attention span for a tv show anymore
May 13, 2015 10:04 AM - Mike Kelly: can't imagine adding kids to that mix
May 13, 2015 10:05 AM - bamhm182: It took my 4 days to watch Episode IV, just don't worry about watching the whole thing at once
May 13, 2015 10:05 AM - jbigler1986: yeah we usually watch 1 episode of something at night. then it's game over
May 13, 2015 10:05 AM - Mike Glass: For a good movie like orignal star wars, epic, I could watch 2 times in a row.
May 13, 2015 10:05 AM - jbigler1986: Hate splitting up a movie
May 13, 2015 10:05 AM - bamhm182: Ah, the perks of being alone, haha
May 13, 2015 10:06 AM - bamhm182: I'm planning on watching IV, V, !, II, II, VI in that order
May 13, 2015 10:06 AM - Mike Glass: I remember watching that at the drive in.
May 13, 2015 10:06 AM - Mike Kelly: just always remember
May 13, 2015 10:06 AM - Mike Kelly: hahn shot first
May 13, 2015 10:06 AM - bamhm182: Haha
May 13, 2015 10:09 AM - jbigler1986: how did you dual v6 work MK? Any good
May 13, 2015 10:09 AM - bamhm182: http://myminifactory.us4.list-manag...80cde56c6dab9bd1bc&id=b35ebf0bbc&e=9f675394fb
May 13, 2015 10:09 AM - bamhm182: I keep forgetting I need to print that
May 13, 2015 10:10 AM - Mike Kelly: yeah dual v6's worked well, i liked my height adjustment method
May 13, 2015 10:10 AM - Mike Kelly: made it easy to do on the fly
May 13, 2015 10:10 AM - Mike Kelly: the chimera requires more troubleshooting
May 13, 2015 10:10 AM - Mike Kelly: but it's compact which i like
May 13, 2015 10:10 AM - jbigler1986: one of the best things i have printed is that nozzle torque wrench. that thing is awesome
May 13, 2015 10:11 AM - Mike Kelly: i do like that thing
May 13, 2015 10:11 AM - jbigler1986: i was just looking at pics and was curious
May 13, 2015 10:11 AM - Mike Kelly: yeah the probe level i designed for that sucked
May 13, 2015 10:11 AM - bamhm182: I want to modify it to add a CO2 cartridge that is hooked up to a button that shoots the three blades out
May 13, 2015 10:11 AM - Mike Kelly: kept clipping the prints
May 13, 2015 10:12 AM - jbigler1986: robo autolevel would still work right?
May 13, 2015 10:13 AM - Mike Kelly: yeah but i don't like how inconsistent that is
May 13, 2015 10:13 AM - jbigler1986: understandable
May 13, 2015 10:13 AM - bamhm182: It seems consistent enough by my standards
May 13, 2015 10:14 AM - Mike Kelly: further i didn't want to be probing my printinz plate with a heated nozzle
May 13, 2015 10:14 AM - Mike Kelly: i just kept noticing my Z offset for a perfect layer kept shifting
May 13, 2015 10:15 AM - jbigler1986: did you see the little test print at 95mm/s i did this morning
May 13, 2015 10:15 AM - Mike Kelly: nope
May 13, 2015 10:15 AM - bamhm182: Anyways, it is way past my bed time, I will see y'all around
May 13, 2015 10:16 AM - bamhm182: Also, splitting up Episode V about half way through, jb, haha
May 13, 2015 10:16 AM - jbigler1986: 1 sec MK
May 13, 2015 10:17 AM - jbigler1986: http://i.imgur.com/GARmp75.jpg
May 13, 2015 10:17 AM - Mike Kelly: smooth
May 13, 2015 10:18 AM - jbigler1986: http://i.imgur.com/ToarsmB.jpg
May 13, 2015 10:18 AM - jbigler1986: i stopped it before it finished so i could start a print for work
May 13, 2015 10:19 AM - Stephen Capistron: best star wars review
May 13, 2015 10:19 AM - Stephen Capistron:
May 13, 2015 10:19 AM - Stephen Capistron: Part 1 of 7
May 13, 2015 10:26 AM - jbigler1986: I think i'm going to try a non detailed part at 100mm/s tonight
May 13, 2015 10:33 AM - Bill Monroe: back
May 13, 2015 10:35 AM - Stephen Capistron: keeping you on for another year?
May 13, 2015 10:37 AM - jbigler1986: 4
May 13, 2015 10:44 AM - jbigler1986: crickets
May 13, 2015 10:45 AM - jbigler1986:
May 13, 2015 10:48 AM - Mike Kelly: http://3dprint.com/5310/printm3-3d-printer/
May 13, 2015 10:48 AM - Mike Kelly: guess i'm printing the hexagon dual fan mount
May 13, 2015 10:49 AM - jbigler1986: ?
May 13, 2015 10:50 AM - Mike Kelly: for my 1.6
May 13, 2015 10:50 AM - jbigler1986: ahhh
May 13, 2015 10:50 AM - jbigler1986: needed?
May 13, 2015 10:50 AM - Mike Kelly: i think so
May 13, 2015 10:50 AM - Stephen Capistron: i'd rather have a tiko
May 13, 2015 10:51 AM - jbigler1986: @SC lol
May 13, 2015 10:52 AM - Mike Kelly: wish i had some cash on me, guys just came in trying to sell pizzas from a cancelled order
May 13, 2015 10:52 AM - jbigler1986: nobody carries cash
May 13, 2015 10:53 AM - Stephen Capistron: cash is king
May 13, 2015 10:55 AM - Mike Kelly: maybe for drug dealers
May 13, 2015 11:00 AM - Mike Kelly: can't find the stl though
May 13, 2015 11:00 AM - Mike Kelly: were's MG
May 13, 2015 11:00 AM - Mike Glass: im here, just have some issues with sites phones not working.
May 13, 2015 11:03 AM - Mike Kelly: what was the name of the dual hexagon fan holder
May 13, 2015 11:03 AM - Mike Kelly: oh wait it's on thingiverse
May 13, 2015 11:03 AM - Mike Kelly: derp
May 13, 2015 11:04 AM - Mike Glass: haha
May 13, 2015 11:04 AM - jbigler1986: it happens
May 13, 2015 11:04 AM - Mike Glass: brain fart
May 13, 2015 11:05 AM - jbigler1986: I don't want to sign in to watch that delta video. what the hell
May 13, 2015 11:06 AM - Mike Kelly: http://www.thingiverse.com/make:137118 fun but stupid
May 13, 2015 11:06 AM - Mike Glass: I saw those funny things,
May 13, 2015 11:06 AM - jbigler1986: ha. i saw that yesterday on myminifactory
May 13, 2015 11:08 AM - jbigler1986: ouch. didn't even come close to the goal

 

May 13, 2015 11:08 AM - jbigler1986: wonder what happened
May 13, 2015 11:08 AM - jbigler1986: http://www.ustream.tv/channel/jbigler1986 cruising
May 13, 2015 11:09 AM - Mike Kelly: lookin good
May 13, 2015 11:11 AM - jbigler1986: that's at 75
May 13, 2015 11:12 AM - jbigler1986: turned down the brightness of the leds a little to far
May 13, 2015 11:17 AM - Mike Kelly: what do you use to adjust them
May 13, 2015 11:18 AM - jbigler1986: mine are externally powered and came with a remote
May 13, 2015 11:19 AM - jbigler1986: i could wire it into the power supply but dont feel like it
May 13, 2015 11:19 AM - Stephen Capistron: so can you make it a disco dance party in there?
May 13, 2015 11:19 AM - jbigler1986: i could
May 13, 2015 11:20 AM - Stephen Capistron: you need to piggy back off the stepper motors to have it light up in sync to the movements
May 13, 2015 11:20 AM - jbigler1986: this is just 3 of the 4 legs
May 13, 2015 11:21 AM - jbigler1986: lol. that would be a headache watching that
May 13, 2015 11:22 AM - Mike Glass: would that work?
May 13, 2015 11:22 AM - Stephen Capistron: i have no idea
May 13, 2015 11:22 AM - Bill Monroe: it would work
May 13, 2015 11:23 AM - Bill Monroe: might need a mosfet.. proble is the pulses happen so fast all you'd see is a steady light
May 13, 2015 11:24 AM - Stephen Capistron: Bill, I now have expectations for your first week of retirement. I want multicolor lighting in tune to the printer
May 13, 2015 11:24 AM - Bill Monroe: consider it.... on the back burner
May 13, 2015 11:25 AM - jbigler1986: unacceptable
May 13, 2015 11:25 AM - Bill Monroe: how about some carnival music too
May 13, 2015 11:25 AM - jbigler1986: has to be disco
May 13, 2015 11:25 AM - Bill Monroe: it would be best just to latch on to an unused output and write some firmware addition to trigger it
May 13, 2015 11:27 AM - Bill Monroe: on and stephen, my first week of retirement will probalby be spent in Fiji
May 13, 2015 11:27 AM - Stephen Capistron: only a week?
May 13, 2015 11:28 AM - Bill Monroe: probably the second, third and fourth too
May 13, 2015 11:28 AM - Bill Monroe: ahaha too fast
May 13, 2015 11:28 AM - Bill Monroe: amry buddy lives there.. operates a dayfishing op
May 13, 2015 11:28 AM - Bill Monroe: army
May 13, 2015 11:30 AM - jbigler1986: Buddy? Can't be true
May 13, 2015 11:30 AM - Bill Monroe: so, the meeting I got summoned to.. not at all what I thought it would be
May 13, 2015 11:31 AM - jbigler1986: hopes and dreams shattered
May 13, 2015 11:31 AM - Bill Monroe: ya, he was my sergant/door gunner
May 13, 2015 11:31 AM - Bill Monroe: it wasnt totally bad
May 13, 2015 11:32 AM - Bill Monroe: see.. my company makes stuff to track and control stuff in hospltals.. meds, narcs, qtips.. etc..
May 13, 2015 11:32 AM - Bill Monroe: they pulled me off once a year ago to do some QI ... i got tired of the hassle it took to get the drawers and compartments open
May 13, 2015 11:33 AM - Mike Kelly: http://3dprint.com/63229/dollo-3d-printer-prints-itself
May 13, 2015 11:33 AM - Bill Monroe: so I wrote code for a mega , plugged it into the controller, pushed a buttton, and all the drawers and stuff opened with not further intervention
May 13, 2015 11:33 AM - Bill Monroe: much easier
May 13, 2015 11:34 AM - Bill Monroe: until someone realized if it made it into a hospital, somoene could raid all the cabinets with impunity
May 13, 2015 11:34 AM - Bill Monroe: ut-oh
May 13, 2015 11:35 AM - Bill Monroe: they demanded I give it to them, and sign paperwork saying I would never duplicate it without authroization
May 13, 2015 11:35 AM - Bill Monroe: then the good stuff happened
May 13, 2015 11:36 AM - jbigler1986: 1 MILLION DOLLARS
May 13, 2015 11:36 AM - Bill Monroe: part of the paperwork,, I cant be specific on the arrangement
May 13, 2015 11:36 AM - Bill Monroe: but now I can get 2.0 the new grand cherokee she's been wanting
May 13, 2015 11:37 AM - jbigler1986: booooo
May 13, 2015 11:37 AM - Bill Monroe: ok, Dr jbEvil
May 13, 2015 11:37 AM - jbigler1986: If you are getting a Jeep then get a JEEP
May 13, 2015 11:38 AM - Bill Monroe: ya, I have a 2005 now, inherited it from my sis-in-law when she died
May 13, 2015 11:38 AM - Bill Monroe: not a huge fan
May 13, 2015 11:38 AM - Bill Monroe: it does really scoot though
May 13, 2015 11:39 AM - Bill Monroe: but 2.0 is in LOVE with it.. now it's got 185K on it, still runs great, but the tiremarks are on the wall
May 13, 2015 11:40 AM - jbigler1986: My wife has 2012 unlimited rubicon
May 13, 2015 11:40 AM - Bill Monroe: she like it
May 13, 2015 11:40 AM - Bill Monroe: ?
May 13, 2015 11:40 AM - jbigler1986: http://media.caranddriver.com/image...iew-car-and-driver-photo-439345-s-429x262.jpg
May 13, 2015 11:40 AM - jbigler1986: has different wheels and tires though
May 13, 2015 11:41 AM - Bill Monroe: mine is a limited w/Hemi
May 13, 2015 11:41 AM - Bill Monroe: leather, hot seats, all the trimming available in 2005
May 13, 2015 11:42 AM - Bill Monroe: she drove a new Fiat-influenced one when ours was in for service
May 13, 2015 11:42 AM - Stephen Capistron: hot seats in SoCal. Don't you just call that the sun?
May 13, 2015 11:42 AM - Bill Monroe: naw.. that's the hot steering wheel feature
May 13, 2015 11:42 AM - jbigler1986: I like the older cherokee. Not a big fan of the new body style
May 13, 2015 11:43 AM - Bill Monroe: where I live, we get snow in the winter
May 13, 2015 11:43 AM - jbigler1986: 2005 model i still like
May 13, 2015 11:43 AM - Bill Monroe: i think I can talk her out of the cherokee..
May 13, 2015 11:43 AM - jbigler1986: not much newer than that though
May 13, 2015 11:43 AM - Bill Monroe: actually, maybe I should look into wedging a new drivetrain into the 05?
May 13, 2015 11:44 AM - Bill Monroe: refurb the seats... add bluetooth..
May 13, 2015 11:44 AM - Bill Monroe: cant cost as much as a new one huh?
May 13, 2015 11:44 AM - Bill Monroe: ohya.. Paint it Red
May 13, 2015 11:44 AM - jbigler1986: refurb is pricey
May 13, 2015 11:44 AM - jbigler1986: you should know
May 13, 2015 11:45 AM - Bill Monroe: I'll call Xibit
May 13, 2015 11:45 AM - Bill Monroe: or that Count guy in Vegas
May 13, 2015 11:46 AM - Bill Monroe: what's that lil gay guy that does the wheels?
May 13, 2015 11:46 AM - Bill Monroe: schlem...
May 13, 2015 11:46 AM - Bill Monroe: no
May 13, 2015 11:46 AM - Bill Monroe: cant remember
May 13, 2015 11:46 AM - Bill Monroe: Foose.. that's it
May 13, 2015 11:47 AM - Bill Monroe: I gotta do something or shes going to start driving my Ford
May 13, 2015 11:47 AM - jbigler1986: i like some of his stuff. he ruins a lot of them with the stereo systems though
May 13, 2015 11:47 AM - Bill Monroe: what she SHOULD get is an all-electric smart car
May 13, 2015 11:50 AM - Bill Monroe: ahaha just got an email from my C++ professoer.. he saw what I put in the comments of a head file
May 13, 2015 11:51 AM - Bill Monroe: // Header file contains function and inline macros to find the max of three parameters while attempting to cause student brain overload.
May 13, 2015 11:53 AM - jbigler1986: lol
May 13, 2015 11:53 AM - Bill Monroe: I really like the guy.. qualified as hell.. but he's brutal
May 13, 2015 12:03 PM - Mike Kelly: zbvzyY1FKr0 literally the worst
May 13, 2015 12:03 PM - Mike Kelly:
May 13, 2015 12:08 PM - jbigler1986: if it wasn't for the 3ds nintendo would be doing horrible
May 13, 2015 12:09 PM - Mike Kelly: yeah that thing makes them ridiculous money
May 13, 2015 12:09 PM - Stephen Capistron: wii is pretty fun, but only if you have a group
May 13, 2015 12:09 PM - Shank: what is the thickness of the support that MC uses?
May 13, 2015 12:10 PM - jbigler1986: they seriously need to accept that the wiiu sucks
May 13, 2015 12:10 PM - jbigler1986: MC?
May 13, 2015 12:10 PM - Stephen Capistron:
May 13, 2015 12:11 PM - Shank: when using support in mattercontrol that line thickness?
May 13, 2015 12:15 PM - Mike Kelly: lol stephen
May 13, 2015 12:15 PM - Mike Kelly: the WiiU has a couple good games