1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Solved STL files of replacement parts.

Discussion in 'Troubleshooting' started by David Lockwood, Aug 6, 2017.

  1. David Lockwood

    David Lockwood Member

    Joined:
    Mar 24, 2016
    Messages:
    38
    Likes Received:
    13
    About a year or so ago I think it was Mike Kelly posted the .stl files of all the printable parts for the Robo3D R1+. I'm not sure if it was here or on Thingyverse. Does anyone remember the location of those files? I need to print a new Extruder Carrier for my machine. I will thank you in advance for your assistance.
     
    #1 David Lockwood, Aug 6, 2017
  2. WheresWaldo

    WheresWaldo Volunteer ( ͠° ͟ʖ ͡°)
    Staff Member

    Joined:
    Feb 18, 2015
    Messages:
    5,905
    Likes Received:
    3,593
    #2 WheresWaldo, Aug 7, 2017
    Geof and mark tomlinson like this.
  3. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,757
    Likes Received:
    2,339
    keep in mind those are early R1 parts. Most are still the same as the R1+ but some are not. What are you looking for?
     
    #3 Geof, Aug 7, 2017
  4. David Lockwood

    David Lockwood Member

    Joined:
    Mar 24, 2016
    Messages:
    38
    Likes Received:
    13
    I need to replace the part that mounts the extruder and extruder stepper to the part that spans between the x axis smooth rods.
     
    #4 David Lockwood, Aug 7, 2017
  5. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,757
    Likes Received:
    2,339
    that is part of the gregs wade. I believe that is included in the above link but you'll want to check to ensure the nut parts are there (just check it before you print it) for the bolts that hold it together to the quick release.
     
    #5 Geof, Aug 7, 2017

Share This Page