1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Turn off support material around print.

Discussion in 'Software' started by Blackmarkitinnovations, Dec 17, 2014.

  1. Blackmarkitinnovations

    Blackmarkitinnovations New Member

    Joined:
    Dec 17, 2014
    Messages:
    2
    Likes Received:
    9
    I'm seeing if there's a way to turn off or keep the printer from printing the extra material that is suppost to support the original print. The last few prints it's caused more problems than good.
     

    Attached Files:

    #1 Blackmarkitinnovations, Dec 17, 2014
    5 people like this.
  2. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    Slicer option. Disable support material generation
    Exactly what screen/checkboxes, etc. depend on the slicer you are using.
     
    #2 mark tomlinson, Dec 17, 2014
  3. Mike Kelly

    Mike Kelly Volunteer

    Joined:
    Mar 11, 2013
    Messages:
    6,967
    Likes Received:
    2,276
    Whoa those prints look amazing. Have you had to do anything to achieve that or was that out of box?
     
    #3 Mike Kelly, Dec 17, 2014
  4. Blackmarkitinnovations

    Blackmarkitinnovations New Member

    Joined:
    Dec 17, 2014
    Messages:
    2
    Likes Received:
    9
    That's out of the box. After I figured out how to run It off the sd card. That was my second print ever. It's been working flawlessly. I probably ran in 30 hrs the first weekend. I found the option to shut off support material in the motion control 1.2
    Thanks.
     
    #4 Blackmarkitinnovations, Dec 17, 2014
    4 people like this.

Share This Page