1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

What to do when the power supply dies

Discussion in 'Troubleshooting' started by Lance Weston, Jul 18, 2020.

  1. Lance Weston

    Lance Weston Active Member

    Joined:
    Jun 2, 2018
    Messages:
    478
    Likes Received:
    160
    My R2 power supply died and the fix is fairly inexpensive.

    take the four screws out of the bottom of the power supply and disassemble it. The goal is to remove the low voltage cable that plugs into the R2. Now cut the end off the power cord that plugged into the power supply. Purchase a 24v 15a power supply. https://www.amazon.com/gp/product/B07CPTHG7N/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
    I paid about $20. Wire up the supply as per the picture. Adjust the tiny pot next to the green led to set the supply to 24v +/- 2%.

    Plug it into the R2.
     

    Attached Files:

Share This Page